• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.3A
• /
• pp.223-231
• /
• 2011

It has been shown that the performance of multiple-input multiple-output (MIMO) spatial multiplexing systems is significantly degraded when spatial correlation exists between transmit and receive antenna pairs. In this paper, we investigate designs of a new statistical precoder for spatial multiplexing systems with maximum likelihood (ML) receiver which requires only correlation statistics at the transmitter. Two kinds of closed-form solution precoders based on rotation and power allocation are proposed by means of maximizing the minimum E tlidean distance of joint symbol constellations. In addition, we extend our results to linear receivers for correlated channels. We provide a method which yields the same profits from the proposed precoders based on a simple zero-forcing (ZF) receiver. The simulation shows that 2dB and 8dB gains are achieved for ML and ZF systems with two transmit antennas, respectively, compared to the conventional systems.

• Animal Bioscience
• /
• v.36 no.10
• /
• pp.1508-1516
• /
• 2023

Objective: To carry out a comprehensive production planning of the existing Rongchang pig population from both environmental and genetic aspects, and to establish a closed population with stable genetic diversity and strict pathogen control, it is necessary to fully understand the genetic background of the population. Methods: We genotyped 54 specific pathogen free (SPF) Rongchang pigs using the Zhongxin-1 Porcine Breeding Array PLUS, calculated their genetic diversity parameters and constructed their families. In addition, we also counted the runs of homozygosity (ROH) of each individual and calculated the value of inbreeding coefficient based on ROH for each individual. Results: Firstly, the results of genetic diversity analysis showed that the effective population size (N_e) of this population was 3.2, proportion of polymorphic markers (P_N) was 0.515, desired heterozygosity (H_e) and observed heterozygosity (H_o) were 0.315 and 0.335. H_o was higher than H_e, indicating that the heterozygosity of all the selected loci was high. Secondly, combining the results of genomic relatedness analysis and cluster analysis, it was found that the existing Rongchang pig population could be divided into four families. Finally, we also counted the ROH of each individual and calculated the inbreeding coefficient value accordingly, whose mean value was 0.09. Conclusion: Due to the limitation of population size and other factors, the genetic diversity of this Rongchang pig population is low. The results of this study can provide basic data to support the development of Rongchang pig breeding program, the establishment of SPF Rongchang pig closed herd and its experimental utilization.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.3
• /
• pp.75-80
• /
• 2007

This study evaluated groundwater quality around an uncontrolled landfill in W sity, Korea, which was monitored for about two years (2005-2006). Parameters of concern include redox-sensitive indicators such as pH, DO, EC, ORP, DOC (dissolved organic carbon), NH3, NO3 and SO4. About 10 years have elapsed after closing dumping of municipal wastes in the landfill. Leachates showed widely varying concentrations in COD(136${\sim}$263 mg/L), T-N(121${\sim}$186 mg/L), and NH3-N(14${\sim}$369 mg/L). Groundwater at the immediate downgradient of the landfill showed weakly acidic pH condition but very high levels of EC (3,000-4,000 ${\mu}S/cm$), which indicated that the groundwater was largely affected by the landfill leachate. Cl, a conservative ion, showed over 200 mg/L at the landfill border, but a gradually decreasing level with distance from the landfill, representing dispersion and dilution (natural attenuation) due to mixing with surrounding groundwater and replenished rainwater. Redox potential showed negative value at the landfill border but it increased up to 350 mV at downgradient wells, which indicated conversion of redox condition from reducing oxic ones. Ammonia, was largely enriched at most of the monitoring wells and its level greatly exceeded drinking water standard. In summary, all the parameters evidenced occurrence of natural attenuation with distance and with time but further monitoring is still required.

• Journal of Korean Biological Nursing Science
• /
• v.4 no.1
• /
• pp.5-23
• /
• 2002

Purpose: To determine the effect of the Fall Prevention Program(EPP) on gait, balance and muscle strength in elderly women at a nursing home. Method: The subjects of this consisted of 38 elderly women between the ages of 70 to 89 years living at a nursing home located in Seoul. Each of the experimental group and control group was composed of 19 subjects. The subjects in experimental group have participated in FPP for the 8 weeks which consisted of exercise, education and foot care. They started to exercise for 40 minutes per session, 3 sessions a week during the 1st week at 40% of age adjusted maximum heart rate. From the 2nd week to the 4th week, they increased the duration of exercise to 50 minutes per session and the intensity to 60% of age-adjusted maximum heart rate. They participated in 50 minutes at 60% of age-adjusted maximum heart rate from the 5th week to the 8th week. Each exercise session consisted of 10 minutes of warming-up exercise, 30 minutes of conditioning exercise and 10 minutes of cooling-down exercise. They participated in education for 20 minutes per week from the 1st week to the 4th week. Then they participated in a 30-minute foot care program per week from the 5th week to the 8th week. Gait, balance and muscle strength for each subject were measured before and after FPP. Gait was evaluated by step length, step width, gait speed and walking distance. Balance was measured by the duration of standing on one leg with their eyes closed and open each, and a get-up and go test. Grip strength was measured by hand dynamometer. Hip extensor and flexor strength, knee extensor and flexor strength and ankle plantarflexor and dorsiflexor strength were measured by manual muscle tester. Data was analyzed using SPSS form Windows. t-test and Chi square test were utilized as a homogeneity test. Repeated measure ANOVA was used to test the effect of FPP. Result: 1) Step width significantly decreased, and step length, gait speed and walking distance significantly increased in the experimental group compared with the control group after FPP(p<0.005). 2) There was no significant change in standing time on one leg with their eyes closed after FPP. The standing time on leg with their eyes open and the time of "get-up and go" significantly decreased in the experimental group compared with the control group after FPP(p<0.005). 3) Muscle strength-grip strength, hip extensor and flexor strength-significantly increased in the experimental group compared with the control group after FPP(p<0.005). 4) There was no significant difference of frequency of fall between the experimental group and control group during the period of FPP. Conclusion: These results suggest that FPP can increase gait, balance and muscle strength of elderly women at a nursing home.

• Korean Chemical Engineering Research
• /
• v.53 no.6
• /
• pp.755-761
• /
• 2015

Photocatalytic VOCs removal test in gas phase is generally performed by placing the light source on the outside due to maintaining a constant temperature inside the test chamber. The distance between light source and photocatalysts is importantin the VOC degradation test since the intensity of light is rapidly decreased as the distance farther. Especially, for the choice of light source as UVLED, this issue is more critical because UVLED light source emits lots of heat and it is hard to measure the exact concentration of VOCs due to changed temperature in the test chamber. In this study, we modified VOC removal test chamber base on the protocol of air cleaner test and evaluated the efficiency of photocatalystunder UVLED irradiation. Photocatalystsof two different samples (commercial $TiO_2$ and the synthesized vanadium doped $TiO_2$) weretested for the p-xylene degradation in the closed chamber system and compared with each other in order to exclude any experimental uncertainties. During the VOC removal test, VOC concentrations were monitored and corrected at regular time intervals because the temperature in the chamber increases ${\sim}20^{\circ}C$ due tothe heat of UVLED. The results showed that theconversion ratio of p-xylene has 40~43% difference before and after the temperature correction. Based on those results, we conclude that the VOC concentration correction must be required for the VOC removal test in a closed chamber system under UVLED light source and obtained the corrected efficiencies of various photocatlysts.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.25 no.2
• /
• pp.319-330
• /
• 1995

This study was designed to evaluate the interrelationship between the condylar head position in transcranial view and the articular disc position in the arthrography. The condylar positions were assessed by subjective method and linear measurement method on the transcranial view. The subjects for this study consisted of 24 symptomatic joints with normal disc position, 37 joints with anterior disc displacement with reduction and 44 joints with anterior disc displacement without reduction that were classified by arthrotomography under the fluoroscopic guidance. The interrelationship between the condylar head position in transcranial view and the articular disc position in the arthrography was evaluated by Chi square test. The obtained results were as follows : 1. There was no significant interrelationship between the position of condylar head in closed mouth state on transcraniaJ view and articular disc position in the arthrography (p>0.05). 2. There was no significant interrelationship between the changes of interarticular distance in 1 inch opening state and articular disc position in the arthrography (p>0.05). 3. There was no significant interrelationship between the position of condylar head related to the apex of articular eminence in 1 inch opening state and articular disc position in the arthrography(p>0.05). 4. There was significant interrelationship between the changes of interarticular distance that is assessed by linear measurement method in maximum opening state and articular disc position in the arthrography(p<0.05), but there was no significant interrelationship when the condylar head position was assessed by subjective method(p>0.05). 5. There was significant interrelationship between the degree of condylar translation in maximum opening state and articular disc position in the arthrography(p<0.05). 6. The correlation coefficient between two methods to assess the position of condylar head were 0.7989: the condylar head position in articular fossa in closed state, 0.6847: interarticular space in 1 inch opening state, 0.8965: the degree of condylar translation in 1 inch opening state, 0.5944: the changes of interarticular space in maximum opening state, 0.9215: the degree of condylar translation in maximum opening state.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.7 no.4
• /
• pp.235-246
• /
• 2002

The fish farming using net cages has been developed in many semi-closed bays in the southern coast of Korea for the last two decades. The intensive cage cultures of fishes generate considerable amounts of organic waste in the form of uneaten food and faeces. In order to evaluate the effect of fish farming activities we collected the benthic macrofauna near the fish farm area located in Wolho Islet of Gamak Bay and in Haklim Island of Tongyeong in November 1998. Benthic macrofaunal assemblages showed dramatic changes in species number, species diversity, and faunal abundance in the region of the fish farm. These changes were clearly observed even at a distance of up to 30 m from the fish farming cage area. Within 5 m from the cage, there was a zone with low species diversity and highest density, dominated by opportunistic polychaete worm, Capitella capitata. By a distance of 15-30 m, this zone presents highest species number and higher density. Our results clearly demonstrated that fish farm area was highly enriched with organic materials, and implied that the fish farm industry and adjacent benthic ecosystem in semi-closed bay will be seriously damaged by self produced organic wastes in the near future.

• International Journal of Highway Engineering
• /
• v.10 no.2
• /
• pp.159-166
• /
• 2008

Video image processing systems (VIPS) offer numerous benefits to transportation models and applications, due to their ability to monitor traffic in real time. VIPS based on a wide-area detection algorithm provide traffic parameters such as flow and velocity as well as occupancy and density. However, most current commercial VIPS utilize a tripwire detection algorithm that examines image intensity changes in the detection regions to indicate vehicle presence and passage, i.e., they do not identify individual vehicles as unique targets. If VIPS are developed to track individual vehicles and thus trace vehicle trajectories, many existing transportation models will benefit from more detailed information of individual vehicles. Furthermore, additional information obtained from the vehicle trajectories will improve incident detection by identifying lane change maneuvers and acceleration/deceleration patterns. However, unlike human vision, VIPS cameras have difficulty in recognizing vehicle movements over a detection zone longer than 100 meters. Over such a distance, the camera operators need to zoom in to recognize objects. As a result, vehicle tracking with a single camera is limited to detection zones under 100m. This paper develops a methodology capable of monitoring individual vehicle trajectories based on image processing. To improve traffic flow surveillance, a long distance tracking algorithm for use over 200m is developed with multi-closed circuit television (CCTV) cameras. The algorithm is capable of recognizing individual vehicle maneuvers and increasing the effectiveness of incident detection.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.4
• /
• pp.464-469
• /
• 2015

This study was carried out to find relationships of genetic distance and heterosis expression degree in the developed CNU waxy corn lines. The used material were developed in Corn Breeding Laboratory, Coll. of Agri. & Life Sci., CNU. Total 10 primers used for SSR maker analysis. In genetic distance, the used lines divided into four groups; A group has two lines, B group has one line, C group has ten lines and D group has eleven lines, respectively. Among used lines, CNU427 and CNU588 were very closed as a 74, while CNU451 and CNU429 were remote as a 40 inbred coefficient, respectively. While heterosis degree were very variable not only hybrids but also cross parents. Average heterosis of most cross-parent was high in plant height, ear height, flowering day and ear length. Especially, CNU H09-23 hybrid was high as 79.4% than other hybrids. Here, we gained the fact has closely relationship between genetic distance and heterosis.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.4
• /
• pp.338-344
• /
• 2010

Both ends of welding line are often closed by wall in the welding of ship blocks. In this research, seam tracking sensing system for butt welding in the condition with wall was developed. Seam tracking sensing system measures position of carriage from wall and detects root-pass of welding line. The system consists of the laser displacement sensors and ultrasonic sensors. The laser displacement sensor reciprocal1y rotates by the motor and measures a distance from laser sensor to the welding material. The ultrasonic sensor measures a distance between welding system and walls. The distance measured by the ultrasonic sensor is used to get X(driving) position and to determine initial and end point of the weld line. Y(weaving) and Z(height) of the weld line are obtained by the distance measured by the laser displacement sensor and the orientation of the sensor. The sensing system includes the controller that is independent from the welding carriage. The seam tracking sensing system is attached to both side of welding carriage so that interference between welding torch and sensing system can be avoided during the welding. And both side sensing system minimize dead zone. Finally, developed sensing system was adhered to welding carriage and verified usefulness by experiments.