• 비파괴검사학회지
• /
• 제28권3호
• /
• pp.292-301
• /
• 2008

A linearized model for hysteretic acoustic nonlinearity of imperfectly joined interface is proposed and analyzed by using Coulomb damping to investigate the characteristics of the reflection and transmission coefficients for harmonic waves at the contact interface. Closed crack is modeled as non welded interface that has nonlinear discontinuity condition in displacement across its boundary. Based on the hysteretic contact stiffness of the contact interface, the reflected and transmitted waves are determined by deriving the tractions on both sides of the interface in terms of the discontinuous displacements across the interface. It is found that the amplitudes of the reflected and transmitted waves are dependent on the frequency and the hysteretic stiffness. As the frequency of the incident wave increases, the higher reflection and lower transmission are obtained. It also shows that the hysteresis of the interface increases the reflection coefficient, but reduces the transmission coefficient. A fatigue crack is also made in aluminum specimen to demonstrate these characteristics of the reflection and transmission of contact interfaces.

• 대한기계학회논문집
• /
• 제17권2호
• /
• pp.277-284
• /
• 1993

본 연구에서는 적분변환에 의한 해법을 사용하여 폐형으로 주어지는 엄밀해를 얻었다. 먼저 평면에 수직한 방향의 변위를 도입하여 주어진 문제를 Mellin 변환하 고 수식화 하면 Wiener-Hopf 방정식이 주어진다.이 방정식을 푼 다음 변위에 관한 적분 표현식을 점근(asymptotic)전개하여 평가하면 균열선단 부근의 변위가 결정된다. 이로부터 폐형(closed form)으로 구성되는 균열선단부근의 응력확대계수(stress in- tensity factor)를 얻었다. 이 결과를 가지고 특정한 경우에 해당되는 기존의 연구 결과와 비교하였다. 특별히 가해진 하중이 자기평형(self equilibrium)을 이루는 경 우에 한정하여 계면에 인접한 재료의 결과와 동일함을 무한고체물에 대한 해석에서 보 인 바 있는데, 이와같은 정성적인 결과가 본문제와 같이 계면방향 표면균열을 지니는 반무한 크기의 고체물에서도 유지되는가를 검토하였다. 아울러 본 연구와 동일한 모 양의 균열이라면 고체물표면 혹은 균열면에 임의로 분포하는 비평면하중문제에 대한 응력확대계수는 본 연구의 결과를 가지고 간단한 적분을 수행함으로써 용이하게 계산 됨을 보였다.

• 대한기계학회논문집A
• /
• 제25권6호
• /
• pp.949-958
• /
• 2001

A semi-infinite interfacial crack propagated with constant velocity in two bonded anisotropic strips under out-of-plane clamped displacements is analyzed. Using Fourier integral transform the problem is formulated and the Wiener-Hopf equation is derived. By solving this equation the asymptotic stress and displacement fields near the crack tip are obtained, where the results get more general expressions applicable not only to isotropic/orthotropic materials but also to the extent of the anisotropic material having one plane of elastic symmetry for the interfacial crack. The dynamic stress intensity factor is obtained as a closed form, which is decreased as the velocity of crack propagation increases. The critical velocity where the stress intensity factor comes to zero is obtained, which agrees with the lower value between the critical values of parallel crack merged in the material 1 and 2 adjacent to the interface. Using the near tip fields of stresses and displacements, the dynamic energy release rate is also obtained as a form of the stress intensiy factor.

• Computers and Concrete
• /
• 제14권1호
• /
• pp.59-71
• /
• 2014

The paper is concerned with the analytical description of a resistance mechanism, not considered in previous models, by which the hoops contribute to the shear capacity of RC columns with circular cross sections. The difference from previous approaches consists in observing that, because of deformation, the hoops change their original shape and, as a consequence, their slope does not match anymore the original one in the neighborhood of a crack. The model involves two parameters only, namely the crack inclination and the hoop strain in the neighborhood of a crack. A closed-form analytical formulation to correlate the average value of the crack width and the hoop strain is also provided. Results obtained using the proposed model have been compared with experimental data, and a satisfactory agreement is found.

• Structural Engineering and Mechanics
• /
• 제23권1호
• /
• pp.1-13
• /
• 2006

Structural cracks may cause variations in structural stiffness and thus produce bilinear vibrations to structures. This study examines the dynamic behavior of structures with breathing cracks. A generalized algorithm based on the finite element method and bilinear theory was developed to study the influence of a breathing crack on the vibration characteristic. All the formulae derived in the time domain were applied to estimate the period of the overall bilinear motion cycle, and the contact effect was considered in the calculations by introducing the penetration of the crack surface. Changes in the dynamic characteristics of cracked structures are investigated by assessing the variation of natural frequencies under different crack status in either the open or closed modes. Results in estimation with vibrational behavior variation are significant compared with the experimental results available in the literature as well as other numerical calculations.

• 대한기계학회논문집A
• /
• 제21권3호
• /
• pp.447-456
• /
• 1997

Stress intensity factor of semi-infinite parallel crack propagation with constant velocity in dissimilar orthotropic strip under out-of-plane clamped desplacement is investigated. Using Fourier integral transforms the boundary value problem is derived by a pair of dual integral equation and finally reduced to a single Wiener-Hopf equation. By applying Wiener-Hopf technique the equation is solved. Applying this result the asymptotic stress fields near the crack tip are determined, from which the stress intensity factor is obtained in closed form. The more the ratio of anisotropy or the ratio of bi-material shear modulus increase in the main material including the crack, the more the stress intensity factor increases. Discontinuity in the stress intensity factor is found as the parallel crack approaches the interface. In special case, the results of isotropic materials agree well with those by the previous researchers.

• 한국해양공학회지
• /
• 제2권2호
• /
• pp.122-129
• /
• 1988

Recently with the rapid development in marine and shipbuliding industries such as marine structures, ship and chemical plants, there occurs much interest in the study of corrosion fatigue characteristics which was closed up an important role in mechanical design. In this study, the 5086 Al-alloy was tested by use of rotary bending fatigue tester. The retardation effect of overload on the corrosion fatigue crack propagation in sea environment was quantitatively studied. 1) Retardation effect of corrosion fatigue crack propagation is most eminent when overload ratio is 1.52, overload magnitude corresponds to about 77% and 55% of yield strength and tensile strength respectively. 2) After overload ratio 1.52 was used, retardation of corrosion fatigue crack growth rate is largely retarded and quasi-threshold stress intensity factor range($\Delta\textrm{K}_{th}$) appears. 3) According to m of experimental constant, retardation effect of corrosion fatigue crack propagation corresponds to about 25% of constant stress amplitude when overload ratio is 1.52. 4) When overload ratio 1.52 was used, retardation parameter (RP) decreases to about 0.43 and corrosion sensitivity (S)decreses to about 2.1.

• 비파괴검사학회지
• /
• 제28권4호
• /
• pp.352-357
• /
• 2008

구조물의 안전 보장 문제에 있어 재료의 파손 이전에 미세균열을 검출하는 것은 매우 중요하다. 비선형 초음파 기법은 일반적인 초음파 기법보다 미세결함에 민감하기 때문에 이를 이용하여 비파괴적으로 구조물이나 재료의 건전성을 진단하는 방법이 주목받고 있다. 계면접촉에 의한 비선형 초음파 효과는 초음파가 내부의 미세 균열에 입사될 때 미세균열면에서 응력과 변위가 비선형 관계를 가지고, 이에 의해 파가 왜곡되어 그 결과 고조파 성분이 발생하는 현상이다. 본 연구에서는 이러한 비선형 초음파 기법의 적용가능성을 알루미늄 시편에 인위적으로 발생시킨 피로균열을 대상으로 실험적으로 검증하고자 하였다. 이를 위해 V-노치를 갖는 A16061의 피로균열 시험편을 준비하고, 균열방향으로 2차 고조파 성분의 크기를 측정하였다. 실험결과 미세균열에서 고조파 성분이 크게 발생하며 이 기법에 의한 균열깊이 측정이 일반적인 반사파의 6 dB drop법보다 정확함을 확인하였다.

• 대한기계학회논문집A
• /
• 제39권6호
• /
• pp.589-596
• /
• 2015

횡등방성 압전재료에 대한 모서리경사균열 문제를 해석하였다. 두 기계적 집중 면외하중과 전기적 집중 면내하중이 표면과 균열면에 각각 작용하고, 균열면은 절연균열면이다. 일반화된 변위벡터를 도입하고 Mellin 변환을 사용하여 문제를 수식화하고, 이로부터 Wiener-Hopf 식을 유도하였다. 이식을 풀므로써 폐형으로 주어지는 해를 얻었다. 임의의 균열길이나 경사각에 대해서도 적용이 되는 응력 및 전기변위 강도계수와 에너지 방출율을 구하였다. 이 해는 중첩에 의하여 임의로 분포하는 전기기계하중 문제에 대한 해를 제공하는 기본해로 사용될 수 있다.

• 대한기계학회논문집A
• /
• 제27권1호
• /
• pp.66-76
• /
• 2003

The arbitrary V-notched crack problem is considered. The general expressions for the stress components on this problem are obtained as explicit series forms composed of independent unknown coefficients which are denoted by coefficients of eigenvector. For this results eigenvalue equation is performed first through introducing complex stress functions and applying the traction free boundary conditions. Next solving this equation, eigenvalues and corresponding eigenvectors are obtained respectively, and finally inserting these results into stress components, the general equations are obtained. These results are also shown to be applicable to the symmetric V-notched crack or straight crack. It can be shown that this solutions are composed of the linear combination of Mode I and Mode II solutions which are obtained from different characteristic equations, respectively. Through performing asymptotic analysis for stresses, the stress intensity factor is given as a closed form equipped with the unknown coefficients of eigenvector. In order to calculate the unknown coefficients. based on these general explicit equations, numerical programming using the overdetermined boundary collocation method which is algorithmed originally by Carpenter is also worked out. As this programming requires the input data, the commercial FE analysis for stresses is performed. From this study, for some V-notched problems, unknown coefficients can be calculated numerically and also fracture parameters are determined.