• Structural Engineering and Mechanics
• /
• v.89 no.2
• /
• pp.121-133
• /
• 2024

In this paper, the performance of under-foundation isolators against generally annoying train-induced vibrations was examined experimentally. The effect of foundation type on the efficacy of such isolators was investigated for the first time. To this end, laboratory models including a soil container, soil, building with three types of foundation (i.e., single, strip, and mat), and isolator layer were employed. Through various dynamic tests, the effects of foundation type, isolation frequency, and the dominant frequency of train load on the isolator's performance were studied. The results demonstrated that the vibration level in the unisolated building with the strip and mat foundation was, respectively, 29 and 38% lower than in the building with the single foundation. However, the efficacy of the isolator in the building with the single foundation was, respectively, 21 and 40% higher than in the building with the strip and mat foundation. Furthermore, a lower isolation frequency and a higher excitation frequency resulted in greater isolator efficacy. The best vibration suppression occurred when the excitation frequency was close to the floor's natural frequency.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.22 no.3
• /
• pp.175-184
• /
• 2018

In this paper, comparative analysis of the 9.12 Gyeongju and 11.15 Pohang earthquakes was conducted in order to provide probable explanations and reasons for the damage observed in the 11.15 Pohang earthquake from both earthquake and structural engineering perspectives. The damage potentials like Arias intensity, effective peak ground acceleration, etc observed in the 11.15 Pohang earthquake were generally weaker than those of the 9.12 Gyeongju earthquake. However, in contrast to the high-frequency dominant nature of the 9.12 Gyeongju earthquake records, the spectral power of PHA2 record observed in the soft soil site was highly concentrated around 2Hz. The base shear around 2 Hz frequency was as high as 40% building weight. This frequency band is very close to the fundamental frequency of the piloti-type buildings severely damaged in the northern part of Pohang. Unfortunately, in addition to inherent vertical irregularity, most of the damaged piloti-type buildings had plan irregularity as well and were non-seismic. All these contributed to the fatal damage. Inelastic dynamic analysis indicated that PHA2 record demands system ductility capacity of 3.5 for a structure with a fundamental period of 0.5 sec and yield base shear strength of 10% building weight. The system ductility level of 3.5 seems very difficult to be achievable in non-seismic brittle piloti-type buildings. The soil profile of the PHA2 site was inversely estimated based on deconvolution technique and trial-error procedure with utilizing available records measured at several rock sites during the 11.15 Pohang earthquake. The soil profile estimated was very typical of soil class D, implying significant soil amplification in the 11.15 Pohang earthquake. The 11.15 Pohang earthquake gave us the expensive lesson that near-collapse damage to irregular and brittle buildings is highly possible when soil is soft and epicenter is close, although the earthquake magnitude is just minor to moderate (M 5+).

• Korean Journal of Soil Science and Fertilizer
• /
• v.31 no.2
• /
• pp.85-94
• /
• 1998

Due to relatively high permittivity of water in soils, we placed the soil condenser into soils to measure the soil moisture content. The soil condenser was made with two insulated iron sticks. The capacitance of the soil condenser was determined by the pulse period from RC type oscillation circuit and the highest voltage output accepting 10MHz pulse. After zero point adjustment, the measured relative capacitance percentage (RCS) to the standard condenser obtained by the oscillation circuit almost linearly correlated with the end depth of the sensor submerged in water. The RC type oscillation was disturbed by many sensor installed in a close distance in one place, presumably resulting in that the sensor sticks played as a interfering antennas generating or accepting electron waves from them. The temperature dependance of the output from the sensors could be corrected through experimentally determined revision function. Although lineal correlation was found between soil moisture and RCS, users should derive their own correlation function for every sensor to measure soil moisture, because the outputs were influenced by the installation depth and layout in the soil. The voltage type sensor responded inversely with soil moisture content and so was not suitable to the accurate measurement of soil moisture, but allows high economic benefit in various application such as simplified measurement of soil moisture and irrigation line control because of its low component count. The voltage type moisture sensor could be reinforced by relay controlling circuit to open and to close the solenoid valves respectively at optimal limits of the least and the most soil moisture according to user's adjustment.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.42 no.3
• /
• pp.169-178
• /
• 2006

This research aims at establishing the fundamental characteristics of the kite through the analysis of the flow field around various types of kites. The approach of this study were adopted for the analysis; visualization by CFD(computational fluid dynamics). Also, the lift/drag and PIV(particle image velocimetry) tests of kites had been performed in our previous finding. For this situation, models of canvas kite were designed by solidworks(design program) for the CFD test using the same conditions as in the lift/drag tests. And we utilized FloWorks as a CFD analysis program. The results obtained from the above approach are summarized as follows: According to comparison of the measured and analyzed results from mechanical tests, PIV and CFD test, the results of all test were similar. The numerical results of lift-coefficient and drag-coefficient were 5-20% less than those of the tests when attack angle is $10^{\circ},\;20^{\circ}\;and\;30^{\circ}$. In particular, it showed the 20% discrepancy at $40^{\circ}$. The numerical results of the ratio of drag and lift were 8-13% less than those of the tests at $10^{\circ}$ and 10% less than those of the tests at $20^{\circ},\;30^{\circ}\;and\;40^{\circ}$. Pressure distribution gradually became stable at $10^{\circ}$. In particular, the rectangular and triangular types had the centre of the high pressure field towards the leading edge and the inverted triangular type had it towards the trailing edge. The increase of the attack angle resulted in the eddy in order of the rectangular, triangular and inverted triangular type. The magnitude of the eddy followed the same order. The effect of edge-eddy was biggest in the triangular type followed by the rectangular and then the inverted triangular type. The action point of dynamic pressure as a function of the attack angle was close to the rear area of the model with the small attack angle, and with large attack angle, the action point was close to the front part of the model.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.1
• /
• pp.74-82
• /
• 2014

The purposes of this study is to investigate spatial structure characteristics of earthen walled fortresses based on topography, which are locational and Plane morphology, Cross sections of earthworks. Target areas of this study are 37 earthen walled fortresses which are designated as cultural properties. This study is conducted with methodologies of literature review, field investigation, investigation on topography materials and relation analyses of topography&spatial structure. The results from study on spatial structure of earthen walled fortresses are as follows. First, Earthen walled fortresses on flat topography were adjacent to water systems like rivers or streams. Plane morphology showed regular shapes. The cross section morphology presented trapezoid the most with earthworks of which outer and inner walls were built. Second, More than 70% of earthen walled fortresses on hilly topography had water system within close range of approximately 1.5km. Plane morphology was mainly with more than 73% of irregular types. Cross sections of earthworks were of morphology with more than 86% of bordered type and another type leaning against existing topography like mountains. Third, 59% of earthen walled fortresses in mountain areas had water system within their close range, which indicated that they depended on external water system less than those with hilly topography. Plane morphology was mainly with more than 67% of irregular types. Cross sections of earthworks were of monoslope method with more than 94% of bordered type and another type leaning against mountains.

• Tuberculosis and Respiratory Diseases
• /
• v.42 no.2
• /
• pp.218-225
• /
• 1995

Background: Airway resistance(Raw) is measured with the body plethysmograph by displaying the relationship between airflow and alveolar pressure($V/P_A$). If the resistance curve on $V/P_A$ tracing is curved or looped, the estimation of Raw is difficult. This study was designed to examine wheather there is any correlation between the shape of resistance curve and the clinical status and the pulmonary function of patients. Methods: The 146 pulmonary disease patients with increased Raw were included in this study. The shapes of resistance curves on $V/P_A$ tracing with body plethysmograph during quiet breathing were analyzed and compared with pulmonary function. Results: The results were as follows ; 1) The shapes of resistance curves were summarized in 5 categories; type 1: linear, type 2: ovoid, type 3: sigmoid, type 4: scoop, type 5: paisley. The type 3 except 1 case, type 4 and type 5 were found to have loop mainly in expiratory phase. 2) Although the shapes of resistance curves were not typical for specific disease, the resistance curves of acute disease tended to belong to type 1 or 2 and those of chronic airflow obstruction tended to belong to type 3, 4 or 5. But resistance curves of bronchial asthma and destructive lung with tuberculosis showed all types in proportion to degree of airflow obstruction or destruction of parenchyme. 3) In the cases of resistance curves going to type 5 rather than type 1 and those with looping, airflow obstuction tended to be severe and airway resistance and residual volume tended to increase. Conclusions: Analysis of resistance curve on $V/P_A$ tracing measuring airway resistance is helpful for judging degree of airflow obstruction and air trapping. Although the shape of resistance curve is not typical for specific disease, there is a close association between looping and airway obstruction.

• Applied Microscopy
• /
• v.14 no.2
• /
• pp.52-65
• /
• 1984

The ultrastructure of the pars distalis of the adenohypophysis was studied in the female Korean native goat ($10{\sim}16kg$, B.W.) by electron microscopy. Six granular cells and one agranular cell were recognized according to the characteristic patterns of secretory granules and cell organelles. Type I cells were. large, round or oval and contained the largest granules of 290 to 490 nm in diameter, Their endoplasmic reticula were well developed and packed with parallel lamellae close to nuclear membrane. Type II cells were elongate or polygonal. They contained granules of 220 to 390 nm in diameter and well developed Golgi complex. Type III cells were round, oval or angular and contained granules of 150 to 300 nm in diameter. Their endoplasmic reticula were coarsely scattered among the granules and provided an intracellular compartment for segregation in groups. Type IV cells were oval or round and contained granules of 120 to 280 nm in diameter. Their endoplasmic reticula were arranged at one pole of cytoplasm. Type V cells were round or polygonal and contained small granules of 110 to 140 nm in diameter Their endoplasmic reticula were packed with regularly parallel lamellae. Type VI cells were stellate and irregular in shape and had cytoplasmic processes projecting between the neighboring cells. Their granules were less than 130 nm in diameter, the smallest among the cells of the pars distalis. Agranular cells had no granules or a few, if any. They were stellate or irregular in shape.

• Korean Journal of Microbiology
• /
• v.47 no.2
• /
• pp.158-162
• /
• 2011

Amino acid sequence alignment shows that $\underline{P}$roteus $\underline{m}$irabilis $\underline{t}$ranscription $\underline{r}$egulator (PMTR) has cystein sequence homology at metal binding domain to CueR (copper resistance) protein, which conserves two cysteins (Cys 112 and Cys 120 in PMTR). Gel shift assay revealed that PMTR protein bound to promoter region of Escherichia coli copA (copper-translocating P-type ATPase) and Proteus mirabilis atpase (putative copper-translocating P-type ATPase) genes except that of E. coli zntA (zinc-translocating P-type ATPase) gene. DNase I protection experiment indicated that PMTR protein protected the region over -35 box and close to -10 box. DNase I hypersensitive bases were shown at C and A bases of labeled template strand and at G and C bases of labeled non-template strand of DNA. These hypersensitive bases were appeared in other metalloregulatory proteins of MerR family, which suggests protein-induced DNA bending.

• Journal of Ecology and Environment
• /
• v.44 no.3
• /
• pp.185-195
• /
• 2020

Background: The flathead grey mullet Mugil cephalus has the widest distribution among mugilid species. Recent studies based on mitochondrial DNA sequences showed that the species comprises at least 14 different groups, three of which occur in the northwest Pacific. We analyzed the otolith microchemistry of M. cephalus at several locations in Korea to improve understanding of migration pattern and population origin. Results: We collected 123 sagittal otoliths from seven locations and determined their concentrations of eight elements (⁷Li, ²⁴Mg, ⁵⁵Mn, ⁵⁷Fe, ⁶⁰Ni, ⁶³Cu, ⁸⁸Sr, and ¹³⁸Ba) using laser ablation inductively coupled plasma mass spectrometry. Mean otolith elemental ratios differed significantly among the locations. The Sr:Ca, Fe:Ca, and Ba:Ca ratios were significantly higher than others, and useful chemical signatures for investigating the habitat use of M. cephalus populations. We identified five diverse and complicated migration patterns using the otolith data that we collected: estuarine resident (type I), freshwater migrant (type II), estuarine migrant (type III), seawater resident (type IV), and seawater migrant (type V). A canonical discriminant analysis plot revealed separation of two groups (type II in the Yellow Sea vs. other types in remaining locations). Two locations on Jeju Island, despite their close proximity, had fish with quite different migration patterns, corroborating previous molecular studies that distinguished two groups of fishes. Conclusion: We successfully showed that the migration patterns of the Korean mullet varied by location. Only fish from the western sector of Jeju had a unique migration pattern, which is likely confined population in this area. Among the eight otolith elements measured, the Sr:Ca ratio was found to be the best indicator of migration pattern and population origin.

• Applied Microscopy
• /
• v.26 no.3
• /
• pp.349-367
• /
• 1996

The development of small granule-containing cell in the superior cervical ganglion was studied by electron microscopic method in human fetuses ranging from 40 mm to 260 mm crown rump length (10 to 30 weeks of gestational age). At 40 mm fetus, the superior cervical ganglion was composed of clusters of undifferentiated cells, primitive neuroblasts, and unmyelinated nerve fibers together with blood vessels. At 90 mm fetus, the superior cervical ganglion consisted of neuroblasts, satellite cell, small granule-containing cells, and unmyelinated nerve fibers. Two morphological types of the small granule-containing cells in the superior cervical ganglion were first indentified at 90 mm fetus, but were rare. Type I granule-containing cell occurred in solitary and had long processes, whereas type II cells tend to appeared in clusters near the blood capillaries. The granule-containing cells were characterized by the presence of dense-cored vesicles ranging from $150{\sim}300nm$ in diameter in both the cell bodies and processes. Other organelles included abundant mitochondria, rough endoplasmic reticulum, neurotubules, and widely distributed ribosomes. The granule-containing cells had long processes similar to those found in principal ganglionic cells. They could be identified by their content in dense-cored vesicles. The small granule-containing cells increased somewhat in size and number with increase of fetal age. Synaptic contacts were first found on the solitary granule-containing cell at 150 mm fetus. Synaptic contacts between the soma and processes of type I granule-containing cells and preganglionic axon terminals were observed. In addition, synaptic junctions between the processes of granule-containing cells and presumed dendrite of postganglionic neuron were also observed from 150 mm onward. On the basis of these features type I granule-containing cells could be considered as interneurons. The clusters of type II granule-containing cells were located in the interstitial or subcapsular portions of the ganglion, and had short processes which ended in close relation to fenestrated capillaries. Therefore it may be infer that clusters of type II granule-containing cells have an endocrine function.