• Journal of Korea Foundry Society
• /
• v.5 no.2
• /
• pp.97-108
• /
• 1985

In order to investigate the effect of magnesia clinker on the characteristics of the investments, temperature change during setting, setting time, compressive strength and thermal expansion of the investments were measured, and x-ray analyses were also performed. The investments were prepared in accordance with variation of the content and the particle size of magnesia clinker respectively. From this experiment, the results were summarized as follows; 1. Temperature of the investments during setting rapidly increased with increase of MgO contents and decrease of the particle size of magnesia clinker. 2. Setting time decreased with increase of MgO contents and decrease of the particle size of magnesia clinker. 3. Compressive strength increased with increase of MgO contents and decrease of the particle size of magnesia clinker. 4. Thermal expansion decreased with increase of MgO contents and decrease of the particle size of magnesia clinker. From the above results, the investment which contains 8% of MgO (270-325mesh) could be recommended for phosphate investment castings.

• The Korean Journal of Ceramics
• /
• v.6 no.2
• /
• pp.96-99
• /
• 2000

Particle size of the cement raw materials is important not only in clinker burning but also in cement productivity. Model experiment was designed to investigate the effect of compressive grinding on cement raw materials and clinker granule. Compressive grinding was more efficient in reducing hard materials like quartz. Regression model was constructed to explain the effect of compressive grinding on the size reduction of cement raw materials and clinker.

• Journal of the Korean Ceramic Society
• /
• v.44 no.4 s.299
• /
• pp.224-229
• /
• 2007

To evaluate the cooling rate of clinker quantitatively, several clinkers with different cooling rate were made in the laboratory. The X-ray diffraction pattern of Ferrite 002 reflection were measured and the parameters were calculated by using split type pseudo-Voigt function. The X-ray diffraction patterns of the Ferrite phase in the clinkers from cement manufacturing plant were analyzed by using the parameters and the analysis program was developed to calculate the cooling rate quantitatively. The cooling rate coefficients of the clinkers were calculated by using the profile fitting method of the program and the influence of cooling rate on strength was evaluated. The results show that there is a close relation between the cooling rate of clinker and the strength of cement.

• Journal of Korea Foundry Society
• /
• v.5 no.2
• /
• pp.85-96
• /
• 1985

In order to investigate the effect of particle size and distribution of silica sand on the characteristics of investment, W/P ratio, setting time, temperature change during setting, setting expansion, thermal expansion and compressive strength of the investments were measured. In this experiment, magnesia clinker and mono ammonium phosphate were used as binder, and particle size and distribution of silica sand were classified for convinence into 10 categories. The main results obtained from this investigation were summerized as follows. 1. W/P ratio decreased with increase of particle size and evenness in distribution of sand grain. 2. Setting time decreased with increase of evenness in distribution of sand grain, and temperature during setting increased with evenness in distribution of sand grain. 3. Setting expansion decreased with increase of particle size, while it increased with evenness in distribution of sand grain. 4. Thermal expansion decreased with increase of particle size. 5. Compressive strength increased with increase of particle size and evenness in distribution of sand grain. From above results, G.F.N. 250 sand which contains 30% of 50-100 mesh could be recommended for investment casting.

• Journal of the Korean Society for Heat Treatment
• /
• v.36 no.1
• /
• pp.22-32
• /
• 2023

In general, when scrap is dissolved in an electric arc furnace, the amount of electric furnace steel dust (EAFD) generated is about 1.5% of the scrap charge amount, and the electric furnace steel dust collected by the bag filter is charged into the Rotary Kiln or Rotary Hearth Furnace (RHF), and the zinc component is recovered as crude zinc oxide, at which time a clinker of Fe-Base is generated. In this research, first, for the efficient resource conversion of electric furnace steel dust, a reduction and roasting experiment was conducted and the reaction kinetics was examined. As a result of the experiment, it was observed that the reduction and roasting reaction was actively conducted in the range of 1100~1150℃, and melting occurred in the range of 1250℃. In the past, this clinker was widely used as a roadbed material for road construction and an Fe-Source for cement production, but in recent years, it has been mainly reclaimed due to strengthening environmental standards. However, landfill treatment is by no means a desirable treatment method due to environmental pollution caused by leachate, expensive landfill costs, and waste of Fe resources. Therefore, in order to more actively recycle the Fe component in the clinker, first of all the clinker was pulverized into an optimal particle size, and anthracite and binder (starch) were added to the magnetic material obtained by specific gravity and magnetic separation for briquet. As a experimental results, it was possible to efficiently separate clinker as Fe component and other slag component by specific gravity and magnetic force. As a results of loading and dissolving the manufactured briquet clinker in an electric arc furnace, it was observed that the unit of power and production yield were clearly improved and the carbon addition effect in molten metal was also somewhat.

• Land and Housing Review
• /
• v.15 no.1
• /
• pp.147-156
• /
• 2024

This study aims to reduce CO₂ generated during the manufacturing process by using limestone (CaCO₃), a carbonate mineral used in the production of cement clinker, as a decarbonated raw material that does not contain CO₂. Among various industrial by-products, we attempted to use cement paste attached to waste concrete. In general, limestone for cement must have a CaCO₃ content of at least 80% (CaO, 44% or more) to ensure the quality of cement clinker. However, the CaO content of waste concrete fine powder is about 20% on average, so in order to use it as a cement clinker raw material, the CaO content must be increased to more than 35%. Therefore, by using the difference in hardness of the mineral composition of waste concrete fine powder to selectively crush CaO type minerals with relatively low hardness, classify and sieve, the CaO content can be increased by more than 35%. Accordingly, in this study, we experimentally and statistically reviewed and analyzed the optimal conditions for efficiently separating CaO and SiO₂ and other components by selectively pulverizing minerals containing relatively low CaO through a grinding process. As a result of the optimal grinding conditions experiment, it was found that the optimal conditions were a grinding time of less than 5 minutes, a type of material to be crushed of 30 mm, and an amount of material to be crushed of 1.0 or more. However, it is judged that it is necessary to review pulverized materials of mixed particle sizes rather than pulverized products of single particle size.

• Journal of the Korean Ceramic Society
• /
• v.34 no.10
• /
• pp.1027-1036
• /
• 1997

The reology and several physical properties of cements are studied by varying the different mineral composition and particle size distribution(PSD) of cements with closed circuit ball mill for high workability, low heat of hydration, and high strength. In this study, we found that the workability of concretes is related to the viscosity of cement, and affects to strength. Here, this workability is affected by mineral composition (C3A) and the PSD. Especially, rosin-rammer index and 44${\mu}{\textrm}{m}$ residue in the PSD of cements are affected to water demand, casting property, slump loss, strength of cements. From the above results, the conditions of cement for high workability, low heat of hydration and high strength are to use low C3A clinker, 5-10% slag addition, and to grind cement below 0.7 rosin-rammer index, above 3.5-4.5% 44 ${\mu}{\textrm}{m}$ residue, 4000$\pm$100 $\textrm{cm}^2$/g blaine. Such cements are, therefore, supurior to super low heat cement and slag-blended cement in comparing the physical properties of strength, slump, slump-flow, adiabetic temperature, etc.

• Journal of the Korean Ceramic Society
• /
• v.12 no.4
• /
• pp.19-28
• /
• 1975

In order to obtain the superior refractory setter having better spalling resistance, cordierite was synthesized from domestic raw materials. Raw mixtures were fired between 125$0^{\circ}C$ and 140$0^{\circ}C$, and qualitative determination of crytallization was investigated by x-ray diffraction analysis. The results obtained are as follows; 1) The optimum batch composition of synthesized cordierite is 80.5% of Hadong kaolin (pink), 14% of Kyulsung tromolite talc and 5.5% of magnesia clinker, and the firing temperature is 1375$^{\circ}C$. 2) The composition of the refractory setter which exhibits the best values for the thermal properties is 40% of synthesized cordierite, 30% of kaolin chamotte(contains more than 60% of mullite), and 30% of Japanese clay. 3) The optimum particle size distribution of ternary mixture consists of 50% of coarse articles (3.327-1.168mm), 25% of intermediate particles (1.168-0.208mm) and 25% of fine particles (0.208-0.000mm).

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.521-524
• /
• 2008

The purpose of this study is to identify the character and condition of Cr in the clinker and thereby contribute to the research for reduction in utilizing Cr in the cement manufacturing process. The concentration of chromium by cement particle size and the distribution of chromium by clinker mineral were measured. Next, correlation was considered between chromium and the soluble components in cement. As a result, in the range that cement particles were 20${\mu}$m or less, highest soluble hexavalent chromium was found. When the concentration of chromium was measured through mineral separation, belite and the interstitial phase were higher in chromium than in alite. soluble hexavalent chromium was contained in domestic cement less than 20ppm, and its conversion ratio was somewhat high as 10 to 40% or so.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.11 no.5
• /
• pp.190-196
• /
• 2001

Alunite was dehydrated at 500~$580^{\circ}C$ and desulfurued at 580~$780^{\circ}C$ in air atmosphere. Therefore, this study was carried out to investigate the formation conditions of anhydrite ($CaCO_4$) when the mixtures of alunite TEX>$[K_2SO_4$.$Al_2(SO_4)_3$.$4Al(OH)_3$] and limestone ($CaCO_3$)were roasted. Alunite scarcely dected the partial pressures of $CO_2$(g), but limestone was bansformed into CaO at $650^{\circ}C$ in air and $900^{\circ}C$ in saturated $CO_2$(g), atmosphere, respectively. When the the mixtures of 1 mol of alunite and 6 rnol of limestone were roasted for 2 hours at lO00C in air and saturated $CO_2$(g), anhydrite was formed at $550^{\circ}C$ calciumlangbeinite, at $700^{\circ}C$and haiiyne, at 800~$950^{\circ}C$. The formation rate of anhydrite in air and saturated $CO_2$(g), was 99.0 % and 95.0 %, respectively. then the formation rate of anhydrite was not changed in air atmosphere but increased according to the decreasing of the particle size of limestone in saturated $CO_2$(g). Therefore, when the mixture of 1 mol of alunite and 6 rnol of limestone were roasted, the clinker composed of lmol of haiiync and 1 mol of calciumlangbeiilte can be manufactured