• Journal of Conservation Science
• /
• v.4 no.1 s.4
• /
• pp.3-10
• /
• 1995

This study focused on the reconstructional point of Shinan ship-wreck that was excavated between $1976\~1984$. The wreck, which might be sunk in the beginning of the 14th century, is regarded as a vessel of Yuan dynasty, China. This paper tried to find out some structural characteristics and principal dimensions for restoration. The Shinan shipwreck's structural characteristics are summarized as follow, 1) The Shinan shipwreck is formed V-shaped cross section with bar keel, 2) The vessel is divided 8 holds by 7 bulkheads. 3) The ship has flat type stem and transome stern. 4) A rabbeted clinker -built is basically adopted on planking joint. 5) A wooden sheathing, which means a sort of protecting board against marine insects, is covered outside of the main hull, 6) For making an watertight structure, oakum and lime mixtured t'ung-oil are used along the seam of planking and bulkhead. 7) A V-shaped deep water-way exists at both deck side. 8) The shipwreck is believed to have 2 masts at least. 9) The shiptimbers are classified as Chinese Red Pine(Pinus Massonina) which is mainly grown in the southern part of China. Considering as mentioned above the structural characteristics, Shinan ship-wreck could be classified as Chinese Fu-chuan type(복선형) of sea-going ship. The Shinan ship's principal dimensions which are calculated on the basis of Chinese traditional shipbuilding custom, are as follow, Length overall(L.O.A). : 34.80m Length water line(L.W.L) : 24.90m Breadth(B.max.) : 11m Breadth(B) : 10m Depth at keel line(H) : 3.75m Draft(D). : 3.15m Freeboard(F) : 0.65m Ratio, length/breadth(L/B). : 2.26 Ration, breadth/depth(B/D) : 3.5 Height of stem : 7m Height of stern : 10m Displacement : ab.340ton.

• The Journal of the Korea Contents Association
• /
• v.15 no.3
• /
• pp.427-437
• /
• 2015

Concrete, as a construction material, needs suitable reinforcement for tensile region due to weak tensile strength. Many researches on cement reduction have been attempted for $CO_2$ emissions during cement clinker production. In this paper engineering properties of concrete enhanced with polypropylene fiber (PPF) and rice husk ash (RHA) are evaluated. Fiber volume ratios of 0.125~0.375 and RHA replacement ratio of 0~20% are considered for concrete mixture. Lots of test including compressive, split, flexural and the related crack width, impact energy, and pull out test are performed and the results are evaluated considering the fiber ratios, fiber length and RHA replacement. Fiber and RHA ratios have dominant effects on tensile and compressive characteristics respectively, and the concrete with 0.125% of PPF and 10% of RHA shows the most effective enhancement for engineering properties. Appropriate addition of RHA and PPF are very effective both for engineering property enhancement and clean technology.

• Resources Recycling
• /
• v.6 no.1
• /
• pp.29-34
• /
• 1997

The feasibility of using the industrial inorganic waste materials such as l~mestone sludge. Soundly sand. coal fly 'ash, and chemical glasses as a raw material for cement clinker by melting treatmeut was iovestigated. The slag wh~ch is obtained from thc melts of the mixtnres of waste materials is composed of P-C,S(ZCaO - SIOJ and C,AS(ZCaO . AI,O, . SiO,) phases. The effect of melting tempcrabre, coaling condition and CIS ratio on the fo~mation of P-C,S phasc was examed. In order to obtain thc P-CiS phase which is useful in thc utilhtion as a clinkcr malcrid, it B found that sudl considerations as low melting temperature as possible of the wastc mixhire, quenching the melts and law CIS ratio of the mlxhlre are necessary.

• The Journal of the Petrological Society of Korea
• /
• v.20 no.3
• /
• pp.151-159
• /
• 2011

The geology of the Gonaengisool-oreum, Bonggae-dong, Jeju consists of Yeongpyeong-dong basalt, Shinan-dong basalt, Bonggae-dong basalt and cinder in ascending order. Yeongpyeong-dong and Shinan-dong basalt is situated at the mid-mountain slope in southern part of the Gonaengisool-oreum, and Bonggae-dong basalt is located at the Gonaengisool-oreum area and nortgbern low foot of the mountain. Bonggae-dong basalt is aa lava flows with thick clinker. The Gonaengisool-oreum is isolated small volcano, that is, a lava shield having wide crater in the summit with several small pit craters. The average basal elevation of the Gonaengisool-oreum cone is 297.5 m(highest 300 m and lowest 295 m), and the highest summit is 304.5 m, average cone basal width is 597.5 m and cone height is 7.9 m, and mean slope of $1.5^{\circ}$ for the flank of the shield cone.

• Journal of Environmental Science International
• /
• v.16 no.6
• /
• pp.735-743
• /
• 2007

A grouting method is the way to effectively prevent pollutants from spreading into the ground during the digging process of groundwater. This study, based on the comparative study of grouting methods being generally accepted, suggests various construction methods which are suitable for geological structure as follows: In Jeju Island, it is very likely that rocks may fall in shuttered zones such as cracks, joints, scoria layers, and clinker layers. For this reason, it is recommended that materials be injected from the bottom toward the top, not from the top to the bottom. In the case where the amount of injected materials become too large in the areas of cracks or joints because of high level of permeability coefficient, grouting materials which smeared into surrounding areas may cause unwanted cut in the aquifer of the bottom level. To avoid this, the amount of water should be reduced from the typical water-cement ratio of 1:2, and grouting materials with larger grading should be used. If the deep excavation of ground is made in Jeju Island, it is likely to have lots of voids because of geological characteristics. Based on the results of this research, it is found that to construct interior casing, the centralizer should be attached to the casing to prevent the casing from being in contact with the counter fort. The grouting in Jeju Island should be thicker than usual. To avoid over-use of grouting materials, to prevent grouting in more than necessary zone, and to facilitate grouting of void areas, the flexible selection of materials is required. And, to exactly figure out the interior of dug well, an examination through CCTV should necessarily be performed when grouting work is in progress.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.211-216
• /
• 2006

Within the frame of the MERCOSUR (South Common Market), one of the most important goals to achieve by its member states is a better cost effective international cargo transportation system. For this purpose the project of developing a commercial waterway linking the east region of Uruguay with the south of Brazil has been under study for a number of years now. Because of the high costs involved on the development of such waterway, the project has been indefinitely delayed. It is our intention to show an alternative way to reduce the present obstacles by using a budget oriented approach in order to determine the vessel best suited to use on the proposed waterway. So far, every study related to the project has been focused on the amount of work needed to modify the environment in order to accommodate the hardware already available in the region. The conclusions show that the cost of opening and maintaining the required navigation channel is high enough to discourage investment; the added responsibility to take care of any environmental damage incurred during the building and/or operation of the waterway makes searching for a less costly and hazardous option an interesting challenge. The proposed terminal on the Cebollat? River would be located at the heart of the Uruguayan rice growing region. Uruguay exports 90% of its rice production, being Brazil its biggest buyer. Wood chips and clinker are the other types of cargo considered to use the proposed waterway in route to either Brazil or to overseas destinations through the deep water port of Rio Grande. Through the analysis of local data by a Geographical Information System, international regulations regarding inland waterways and shallow draught vessel characteristics, we seek to propose a cost efficient alternative to apply on this particular scenario.

• Resources Recycling
• /
• v.4 no.4
• /
• pp.37-58
• /
• 1995

Whole tues were put uto cement kiln inlet where the tempmalures or gas and cemcnt-raw-materials were 1050 and 800- 850.C. respcclrvely. Tl~ck iln consisls of \ulcorner-stage suspension preheatel- and air quenching coolers The amount of wusle tlrcs added in lhc normal encrgy in lhc ce~ncnlk iln was 3, 5, 7% by volume Welght and steel contents of tiles. ulti~~iaalcn d elemental analysis, ash contents. ash hsion temperature. etc, wete detcnutned to inveshgate thc prnpcrlics a1 tires and ilreir ashes. Flucluat~ons of cement kiln placess, cement quality and an pollulton were invesligalerl during lhc burning tins. When the Ieeding ralio ol wasle lires to normal cncrgy was 50'0, there was nn wlde d~ffereilces m the cemmt quctlity and air pollutcon between operation with tiles and withoul tires. Tl~ch cal iccovcry was uhout 50% w~th5 % add~tionI n the nonndl energy. There was a little lxt fluctuation of cement quultty ncld an pollution at olher feeding ralios.

• Clean Technology
• /
• v.16 no.3
• /
• pp.182-190
• /
• 2010

The feasibility of clean technology to minimize the $CO_2$ emission by recycling and reuse the waste materials and energy have been studied for the cement industry. A life cycle assessment (LCA) was performed for an alternative raw material-supply method to use the molted slag as the major raw material in the cement clinker manufacturing. Using this new method, a 60% of $CO_2$ could be reduced that comes out during the decarboxylation from the cement rotary kiln. The energy-efficiency improvement and the alternative energy methods that had been determined in our previous study through the environmental assessment of cement industry were applied to the study for the reduction of $CO_2$ emission. The natural gas, one of the fossil fuels, was also used as the first choice to get the result at the earliest time by the most economic and the most efficient green technology and to switch into the carbon neutral energy consumption pattern.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.2
• /
• pp.113-121
• /
• 2023

In this study, the applicability and reproducibility of laser induced breakdown spectroscopy(LIBS) for heavy metal analysis in clinker and 5 types of by-products(crushed stone sludge, blast furnace slag, steel slag, waste concrete sludge, bottom ash) were experimentally reviewed. As a result of ICP-MS, XRF, and LIBS analysis of the six samples, the difference between ICP and XRF was confirmed in the quantitative analysis, but the LIBS analysis showed a difference by element from the standard analysis, and only qualitative analysis of the sample was possible. LIBS analysis wavelength was set for three types of heavy metals(Cd - 214.44nm, Pb - 405.78nm, Hg - 253.65nm). As a result of laser irradiation on the surface of the membrane impregnated with a solution of each concentration(1~1000ppm) and dried, the correlation between the spectral intensity and the concentration was confirmed.

• Archives of Plastic Surgery
• /
• v.50 no.6
• /
• pp.573-577
• /
• 2023

Pachyonychia congenita is a rare genetic disorder characterized by hypertrophic nail plates, hyperkeratotic nail beds, and thickened hyponychium of the fingers and toes, impairing manual dexterity and resulting in poor aesthetics. The current body of literature describes various treatment modalities, but no singular approach has been defined as the gold standard. In this case, the authors employed different surgical techniques for treating pachyonychia congenita to evaluate the most effective approach. A 3-year-old boy presented with hypertrophic nail growth involving all digits of both hands and feet. Three surgical procedures were performed on the patient's fingers and toes using germinal matrix excision (GME) alone, GME plus partial sterile matrix excision (pSME), or GME plus complete sterile matrix excision (cSME). The digits treated with GME + cSME exhibited no recurrence of nail growth. Those treated with GME alone exhibited recurrence of hypertrophic nail growth, although their growth slowed. Excision of GME + cSME prevented recurrence of hypertrophic nails, while GME alone or with pSME led to slower-growing hypertrophic nails. Complete excision of the germinal and sterile matrices with skin graft closure may be a definitive treatment for pachyonychia congenita, but further studies are needed to validate these findings.