• 제목/요약/키워드: Clear heat

검색결과 357건 처리시간 0.025초

양위(陽?)에 대한 동서의학적(東西醫學的) 고찰(考察) (A bibliographic Study about comparison of Eastern-Western medicine on impotence)

  • 김형균;김성재
    • 대한한의학회지
    • /
    • 제17권2호
    • /
    • pp.88-99
    • /
    • 1996
  • Impotence is defined as a consistent inability to achieve or maintain penile erection that is adequate for completion of sexual intercourse. In oriental midicine, the chief cause of impotence is the decline of the fire from the gate of life, and in western medicine that is psycogenic and organic. Because of the increase aging people and psycologic stress that modern people get, impotence became common. This bibliographic study on impotence in the oriental and western medicine books has come to the following conclusions. 1. The main cause of impotence in the oriental medicine is the decline of the fire from the gate of life(命門火衰), followed by the deficiency of both heart and spleen(心脾兩虛), the depression of Liver energy(肝氣鬱結), and attack of blended wetness and heat to the lower wanner(濕熱下注). 2. The theraphics of impotence in oriental medicine are warming and strenghthening Kidney. softness of Liver energy, tonifying the Kidney to relieve mental strain, clear away the wetness-heat, and infairment of Heart and Spleen. 3. The prescriptions of impotence are Yugyeyum, Gyibitang, Soyosan, Sunjitang, and Yongdamsagantang. 4. In the western medicine, psycotherapy, medical therapy and surgical therapy are the major way to treat impotence.

  • PDF

DNA Replication is not Required in Re-establishment of HMRE Silencer Function at the HSP82 Yeast Heat Shock Locus

  • Lee, See-Woo;Gross, David S.
    • Journal of Microbiology
    • /
    • 제34권1호
    • /
    • pp.30-36
    • /
    • 1996
  • We have exmained the re-establishment of HIMRE mediated silencing function on the transcriptional activity of yeast heast shock gene HSP82. To test whether the onset of SIR repression can occur in growing cells in the rpesence of a potent inhibitor of DNA replication, HMRa/HSP82 strains with SIR4- and SIR4S$^{+}$ genetic backgrounds were arrested in S phase by incubation of a culture in 200 mM hydroxyurea for 120 min. It was clear that following a 20 minute heat shock, silencing of the HMRa/HSP82 allele in cells pretreated with hydroxyurea does occur in a SIR4-dependen fashion, even though the kinetics of repression appears to be substantially delayed. We also have tested whether re- establishement of silencing at the HMR/hsp82 locus can occur in G1-arrested cells. Cell cycle arrest at G1 phase was achieved by treatment of early log a cell cultures with .alpha.-factor mating pheromone, which induces G1 arrest. The result suggests that passage through S phase (and therefore DNA replication) is nor required for re-establishing silencer-mediated repression at the HMNRa/HSP82 locus. Finally, to test whether de nono protein synthesis is required for re-establishment of silencer-mediated repression, cells were pretreated with cycloheximide (500 /.mu.g/ml) 120 min. It was apparent that inhibiting protein synthesis delays, but does not prevent, re-establishment of silencer-mediated repression. Altogether, these results indicate that re-establishment of silencer-mediated repression is not dependent on the DNA replication and has no requirement for protein synthesis.s.

  • PDF

재생온도가 저온인 경우 제습로터의 재생부/제습부 면적비율과 회전속도 최적화 (Optimization of the Area Ratio of Regeneration to Dehumidification and Rotor Speed on the Condition of Low Regeneration Temperature)

  • 정재동;이대영;윤석만
    • 설비공학논문집
    • /
    • 제19권7호
    • /
    • pp.521-528
    • /
    • 2007
  • The desiccant rotor is the most essential component of desiccant cooling system, but its design relies on manufacturer's experience and principles are not yet clear in spite of a lot of theoretical/experimental work published. The mathematical modeling of desiccant rotor needs solution of coupled partial differential equations of heat and mass transfer. In this study, numerical program is developed and validated using a real desiccant rotor. The calculation results are in reasonable agreement with the experimental data and other available numerical results. Optimization of desiccant rotor on the condition of low regeneration temperature are investigated. The optimal rotor speed at which the process outlet humidity becomes minimized, shows same as that of the system optimization. Compared to high regeneration temperature, broad is the range of optimal speed of low regeneration temperature. Systematic analysis on the optimal area ratio of regeneration to dehumidification section has also been conducted.

정적연소실내의 디젤분무증발과 연소특성에 관한 연구 (A Study on the Diesel Spray Evaporation and Combustion Characteristics in Constant Volume Chamber)

  • 김상호;김석준;이만복;김응서
    • 한국자동차공학회논문집
    • /
    • 제2권6호
    • /
    • pp.102-109
    • /
    • 1994
  • As a fundamental study to apply high pressure injection system to direct injection diesel engine, fuel injection system and constant volume combustion chamber were made and the behaviors of evaporating spray with the variation of injection pressure and the ambient gas temperature were observed by using high speed camera, and the combusion characteristics with the variation of injection pressure and A/F ratio were analyzed. As injection pressure increases, spray tip penetration and spray angle increase and, as a results spray volume increases. This helps an uniform mixing of fuel and air. Spray liquid core length decreases as ambient gas temperature increases, while it decreases as injection pressure increases but the effect of ambient gas temperature is dorminant. As injection pressure increases, ignition delay is shortened and combustion rate being raised, maximum heat release rate increases. It become clear that High injection pressure has high level of potential to improve the performance of DI-diesel engine.

  • PDF

아토피 皮膚炎의 洋.韓方的 考察 (A Literature study about comparison of Eastern-Weatern medicine on the Atopic dermatitis)

  • 공남미;지선영
    • 한방안이비인후피부과학회지
    • /
    • 제12권1호
    • /
    • pp.241-253
    • /
    • 1999
  • The results of the study about comparison of Eastern-Western medicine on the Atopic dermatitis were as follows. 1. Atopic dermatitis is chronic eczematous dermatosis which have severe itching, characteristic eruption, easily occur region and pass on chronic relapsing progress and have family history of Atopic disease and hereditary disposition. 2. Atopic dermatitis assume an remarkable clinical aspect and it's diagnosis depends on family history and clinical symptom. 3. In all cases of Western medical treatment is nothing but a symptomatic treatment because can not find out certainly the cause of Atopic dermatitis. 4. Atopic dermatitis is belong to the category of the 'Naesun(내癬)', 'Taeryumchang(胎斂瘡)', 'Samanpoong(四灣風)' etc. in Oriental medicine. 5. The etiology and pathogenesis of Atopic dermatitis in oriental medicine are congenital defect(稟賦不足), internal accumulation of damp and heat(濕熱內鬱), improper diet(飮食不節), exogenous pathogenic factors(外邪侵襲), etc.. 6. The treatments of Atopic dermatitis in oriental medicine are thought effective clear up heat and remove dampness with febrifugal arld diuretic drug(淸熱利濕), invigorate the spleen to resolve dampness(健脾燥濕), nourish Um and blood to relave dryness(滋陰養血潤燥), etc..

  • PDF

304L stainless Steel의 인장성질에 대한 변형온도, 변형속도 및 결정입도의 영향 (Effect of Deformation Temperature, Strain Rate and Grain Size on the Tensile Properties of 304L Stainless Steel)

  • 강창룡;성장현
    • 열처리공학회지
    • /
    • 제3권2호
    • /
    • pp.20-31
    • /
    • 1990
  • This investigation has been carried out to make clear the effect of deformation temperature, strain rate and grain size on the tensile properties of 304L stainless steel. Tensile properties of the metastable austenitic 304L steel remarkably influenced by deformation temperature. Tensile strength increased with decreasing deformation temperature and the elongation showed maximum value near $40^{\circ}C$. In order to obtain the high elongation, a large amount of deformation is available in austenite before martensitic transformation and the martensite has to be induced gradually. Tensile strength and elongation increased with decreasing grain size. The temperature representing the maximum elongation shifted to low temperature and the peak width of elongation became broaden with decreasing austenite grain size. The volume fraction of strain induced martensite decreased with decreasing austenite grain size. As the strain rate increase, the temperature representing the maximum elongation value shifted to high temperature and volume fraction of strain induced martensite decreased.

  • PDF

RF-MBE 성장조건에 따른 InGaN 단결정 박막의 결정성 관찰 (Effect of Growth Conditions on Crystal Quality of InGaN Epitaxial Layers Grown by RF-MBE)

  • 나현석
    • 열처리공학회지
    • /
    • 제31권5호
    • /
    • pp.237-243
    • /
    • 2018
  • In-rich InGaN epilayers were grown on (0001) sapphire substrates by radio-frequency plasma-assisted molecular beam epitaxy (RF-MBE). InGaN epilayers grown at various growth condition were observed by SEM, XRD, and RHEED. When plasma power of nitrogen increased from 290 to 350 W, surface morphology and crystal quality became worse according to more active nitrogen on the surface of InGaN at N-rich growth condition. As In composition was reduced from 89 to 71% by changing the incoming flux of In and Ga, surface morphology and crystal quality became worse. In addition, weak peaks of cubic InGaN phase was observed from InGaN layer with 71% In composition by XRD ${\Phi}$ scan measurement. When growth temperature decreased from 500 to $400^{\circ}C$, RHEED diffraction pattern was changed to be from streaky to spotty which means atomically rough surface, and spotty pattern showed cubic symmetry of InGaN clearly. XRD ${\Phi}$ scan measurement gave clear evidence that more cubic InGaN phase was formed at low growth temperature. All these results indicates that extremely low surface mobility of Ga adatom caused inferior crystal quality and cubic InGaN phase.

Ti-X계 합금의 분말야금 공정 차이에 따른 미세조직변화 분석 (Analysis of Microstructure Evolution using Different Powder Metallurgy Process in Ti-X Alloy System)

  • 권혁곤;김두현;강민;박지환;오명훈
    • 열처리공학회지
    • /
    • 제34권1호
    • /
    • pp.17-24
    • /
    • 2021
  • In this study, Ti-X (X=Mn, Fe, Mo) powder alloys were designed and manufactured by both powder metallurgy (PM) and metal powder injection molding (MIM) process to improve strength and formability compared to CP-Ti powder materials. It was found that the lamellar microstructure consisted of α and β phases was formed in PM-processed alloys. However, MIM-processed alloys showed not the lamellar microstucture but the equiaxed α + β microstructure. It was also revealed that the contents of X component and feedstock were not affected to microstructure evolution. The reason why different microstructure was appeared between PM-processed and MIM-processed alloys is not clear yet, but supposed to be the effect of intersticial elements such as C, H and N derived from feedstock during debinding process of MIM.

『장부허실표본용약식(臟腑虛實標本用藥式)』에 나타난 약물(藥物) 운용(運用)에 관한 고찰(考察) - 장산뢰(張山雷)의 『장부약식보정(臟腑藥式補正)』을 중심으로 - (A Study on the Medicinal Application in the Zangfuxushibiaobenyongyaoshi - Based on the Zangfuyaoshibuzheng of Zhang Shanlei - )

  • 李相協
    • 대한한의학원전학회지
    • /
    • 제36권1호
    • /
    • pp.45-78
    • /
    • 2023
  • Objectives : Based on the Zangfuyaoshibuzheng of Zhang Shanlei, this paper examines the tip/root division of the Zangfu, features of medicinal application according to deficiency/excess or cold/heat, and erroneous cases in the Zangfuxushibiaobenyongyaoshi of Zhang Jiegu. Methods : Categorization according to tip/root, cold/heat, deficiency/excess and respective medicinal applications in the Zangfuxushibiaobenyongyaoshi were organized, followed by thorough analysis based on the annotations in the Zangfuyaoshibuzheng. Results : First, in the treatment principle of the Zangfu diseases, each of their physiological function and pathological mechanism were analyzed so that the disease patterns are understood accurately and treated accordingly. Second, in categorizing treatment methods, terminology application was modified in overlapping or ambiguous cases so that they could be better distinguished. Third, medicinal categories that were designated to treat each Zangfu disease were explained well based on unique features. In cases where medicinals were falsely included, they were identified and corrected based on sound reasoning. Conclusions : The pattern diagnosis in the Zangfuyaoshibuzheng is clear, and medicinal application analysis is intelligible. As it thoroughly corrects and revises errors in Zhang Jiegu's theories, it could provide valuable assistance in selecting each medicinals when treating disease patterns of the Five Zang.

구취의 한열변증 분석: 구취는 위열증으로 발생하는가? (Relationship between Halitosis and Gastric Fever Analysed by Questionnaire Cold-Heat Patternization)

  • 이선령;김소연;허원영;엄국현;김현경;이준석;윤상협;류봉하;김진성
    • 대한한방내과학회지
    • /
    • 제27권2호
    • /
    • pp.500-509
    • /
    • 2006
  • Objectives: We performed this study to check the effect of Cold-Heat attribute analyzed quantitatively by questionnaire on halitosis patient. Methods: We made a questionnaire composed of 15 items(6 categories) about the contents of Cold-Heat and asked 105 subjects to answer in the form Likert-like seven-points score. And then, we extracted Cold-Heat attribute from 15 items, 6 categories, 6 weighted categories, heat score and cold score. On the other hand we measured the halimeter measurements. VAS, winkle tongue coating index. Afterward, the data were analyzed by statistical methods. Results:1) In the 15 items, question number 6, 7, 8 is negative correlated with halimeter measurements. Question number10 is positive correlated with halimeter measurements. And question number 11, 12, 14 is positive correlated with VAS. 2) In the 6 categories, constipation is negative correlated with halimeter measurements. Chill is positive correlated with VAS. And Cold-limbs is positive correlated with halimeter measurements. 3) In the 6 weighted score categories, constipation is negative correlated with halimeter measurements. Chill is positive correlated with VAS. And Cold-limbs is positive correlated with halimeter measurements. Conclusions: Further clinical research is necessary in the development of the questionnaire's items. And to get the better of this study, we should research more analytic method made casual relationship clear between Cold-Heat attributes and the index of halitosis.

  • PDF