• Journal of Food Hygiene and Safety
• /
• v.38 no.2
• /
• pp.63-68
• /
• 2023

In this study, we analyzed the effect of storage conditions on the survival of fungi in red pepper powder. Red pepper powder was inoculated with a total of six fungal species, namely Aspergillus terreus, Aspergillus flavus, Rhizopus microsporus, Aspergillus fumigatus, Aspergillus niger, and Aspergillus ochraceus at a final cell count of 4-6 log CFU/g. After inoculating the sterilized red pepper powder with fungi, we dried the powder on a clean bench and packaged it in zipper bags. Following drying, the water activity was 0.502±0.001. Subsequently, the red pepper powder inoculated with fungi was stored at -20℃, 5℃, 15℃, and 25℃. All six species of fungi perished the quickest at 25℃ and survived for the longest (168 days) at -20℃. In summary, this study showed that fungi survive for an extended period in red pepper powder at -20℃ and 5℃ compared to 15℃ and 25℃. Therefore, to prevent fungal contamination, red pepper powder should have a water activity below 0.6 and be stored in a zipper bag at room temperature.

• Clean Technology
• /
• v.20 no.4
• /
• pp.449-456
• /
• 2014

There has been increasing concerns for the problems of water security in countries, caused by the frequent occurrence of localized drought due to the climate change and uncertainty of water balance. The importance of fresh water is emphasized as considerable amount of usable fresh water is utilized for power generation sector producing electricity. PV power system, the source of renewable energy, consumes water for the every steps of life cycle: manufacturing, installation, and operation. However, it uses relatively less water than the traditional energy sources such as thermal power and nuclear power sources. In this study, to find out the use of water for the entire process of PV power system from extracting raw materials to operating the system, the footprint of water in the whole process is measured to be analyzed. Measuring the result, the PV water footprint of value chain was $0.989m^3/MWh$ and the water footprint appeared higher specially in poly-Si and solar cell process. The following two reasons explain it: poly-Si process is energy-intensive process and it consumes lots of cooling water. In solar cell process, deionized water is used considerably for washing a high-efficiency crystalline silicon. It is identified that PV system is the source using less water than traditional ones, which has a critical value in saving water. In discussing the future energy policy, it is vital to introduce the concept of water footprint as a supplementary value of renewable energy.

• Clean Technology
• /
• v.15 no.4
• /
• pp.258-264
• /
• 2009

Thermodynamic measurements were performed to show the possibility of recovering $CO_2$ from fuel gas (the mixture of $CO_2$ and $H_2$) by forming gas hydrates with water where water was dispersed in the pores of silica gel particles having nominal 100 nm of pore diameter. The hydrate-phase equilibria for the ternary $CO_2+H_2$+water in pores were measured and $CO_2$ concentrations in vapor and hydrate phase were determined under the hydrate-vapor two phase region at constant 274.15 K. It was shown that the inhibition effect appeared due to silica gel pores, and the corresponding equilibrium dissociation pressures became higher than those of bulk water hydrates at a specific temperature. In addition, direct measurement of $CO_2$ content in the hydrate phase showed that the retrieved gas from the dissociation of hydrate contained more than 95 mol% of $CO_2$ when 42 mol% of $CO_2$ and balanced Hz mixture was applied. Compared with data obtained in case of bulk water hydrates, which showed just 83 mol% of $CO_2$ where 2-stage hydrate slurry reactor was intended to utilize this property, the hydrate formation in porous silica gel has enhanced the feasibility of $CO_2$ separation process. Hydrate formation as not for slurry but solid particle makes it possible to used fixed bed reactor, and can be a merit of well-understood technologies in the industrial field.

• Clean Technology
• /
• v.12 no.1
• /
• pp.45-51
• /
• 2006

Colloidal Liquid Aphrons(CLAs) were prepared from different solvents such as nonpolar hydrocarbons, alcohols, and amines. Water-soluble surfactant and oil-soluble surfactant were used in this study. The effect of PVR (phase volume ratio) and concentration of extractant on the stability of CLA was investigated. The stability of CLA was affected by PVR. As PVR was increased, the stability of CLA was decreased.

• Clean Technology
• /
• v.11 no.2
• /
• pp.105-116
• /
• 2005

Carboxymethylcellulose(CMC) which is water soluble at room temperature was manufactured from the cellulose material in this study. Experimental parameters were reaction temperature, time and concentration of NaOH and monochloroacetic acid. CMC was tested for solubility, degree of substitution(D.S.) and tensile strength. The surface structure of CMC fiber was tested using scanning electron microscope(SEM). CMC manufactured from viscose rayon was affected by the chemical concentration rather then the reaction time and temperature. Also, degree of substitution is closely related to the solubility of the CMC.

• Journal of Environmental Impact Assessment
• /
• v.10 no.2
• /
• pp.99-108
• /
• 2001

This study was performed to develop an information processing system for the sound conservation of soil and groundwater resources. The system contains numerical models and geographic information systems for underground flow and contamination. Multidimensional Finite Element Model for Subsurface Environment (MFEMSE) was invented to analyze underground flow and pollution problems of water and gas phases. Newly developed and conventional models (MODFLOW, MOC3D, MT3D, PMPATH, PEST, UCODE) were integrated with GIS (ArcView) for the construction of an integrated information management system of subsurface environment. This system was applied to the management of three mineral water companies located in clean high mountain basin. Desirable management criteria and operational strategies were suggested using this system. The system was constructed to be applied for the broad sense of decision supporting tools in related topics of this study, so that it can be used not only for the prevention regulations, but also for clean up projects.

• Geotechnical Engineering
• /
• v.7 no.2
• /
• pp.41-50
• /
• 1991

This study investigated the variation of the threshold strain and pore water pressure response of the coils at high amplitude vibration using resonant column test. As a result of tests, threshold shear strains of soft clay, clean quartz sand and stiff volcanic deposit were turned out to be 1$\times$10-2%, 1$\times$10-3%, 1$\times$10-4% respectively. Also, threshold shear Strain was found to be changed with confining pressure for the clean quartz sand. An increase of pore water pressure with shear strain was not significant within the shear strain 3~4$\times$10-3%, but it was abruptly increased beyond shear strain 1$\times$10-2%.

• Clean Technology
• /
• v.7 no.2
• /
• pp.109-117
• /
• 2001

Whereas commonly used to make concrete having rich water contents as binder or mineral admixture, blast furnace slag has been rarely applied to manufacture in concrete based products having poor water contents. This study, for the multi-recycling of blast furnace slag, is to analyze strength enhancement mechanism of concrete based products using blast furnace slag. The results of this study are following. We found that blast furnace slag is very effective mineral admixture to manufacture high strength spacer having over $400kgf/cm^2$ in compressive strength. Also, enhancement of strength by blast-furnace slag are responsible to densified grading and pozzolanic reaction.

• Clean Technology
• /
• v.22 no.1
• /
• pp.29-34
• /
• 2016

Field cultivation of corn and microbial cell viability tests using Pseudomonas putida K-5 were performed to assess the toxic effect of kelp seaweed biochar (KBC) and fir wood biochar (FBC) produced by pyrolysis. After 63 days growth, FBC increased corn growth by 4.9% without fertilizer and by 7.6% with fertilizer, while KBC decreased it by 20.2% without fertilizer and by 27.9% with fertilizer. Physico-chemical characterization of the biochars such as ICP, CHON, and proximate analyses showed that KBC contained large amount of metals and ashes which could be responsible for its inhibition to corn growth. Upon exposure of K-5 cells for 1 h to biochar extracts, the cell viability in KBC extracts was 48.2% and quite lower than that (78.6%) in FBC. Washed KBC biochar with water at 1:10 w/v % increased the cell viability to 54.0%. The results indicated that seaweed biochar may be careful to be used for plant growing additives due to its high concentrations of metals and ashes. This toxic effect could be reduced by proper washing method with water.

• Clean Technology
• /
• v.8 no.3
• /
• pp.129-139
• /
• 2002

This is the study for recycling waste foundry sand. Authors studied about main subject of grading of aggregate and three experimental items such as physical properties of waste foundry sand, optimum grading for concrete products of low water ratio, and quality variations of concrete products according to substitution proportion of fine aggregate as waste foundry sand. We were convinced of following results by experimental study. The first was that waste foundry sand was not fit as the aggregate for concrete because of bad qualities such as grading, unit weight, solid volume and passing 0.08 mm seive, so it is proper to composition using with other fine aggregetes. The second was that optimum grading is fineness modulus of 2.77 to 3.28 And the last is that optimum condition about substitution proportion as waste foundry sand is 10% fine aggregate.