• Journal of Korean Elementary Science Education
• /
• v.23 no.2
• /
• pp.123-130
• /
• 2004

This study is aimed at exploring the effects on Science Inquiry Ability, Scientific Attitude and Science Achievement of the Elementary School Students according to the Input time of Web-Based Instruction Programs. As the object of the study, seventy-two students were selected from three classes in the fifth grade of Y Elementary School located in the city of T, Gyungsangnam-do. They were classified into the three groups such as Group A (Class 1), Group B (Class 2) and Group C (Class 3). The author threw web-based instruction programs into the begining of a unit, during a unit, the end of a unit to each group, and explored the effects. The results of this study were as follows: First, for the learning effect of science inquiry ability, it was indicated that there was the highest effect in the case of throwing web-based instruction programs into during a unit, but the effect reduced a little in the case of throwing them into the end of a unit. Secondly, the scientific attitudes tended to be reduced in the case of throwing them into during a unit, but there did not occur statistically significant improvement. Thirdly, the degree of improvement of the science achievement tended to be highest in the case of throwing them into the end of a unit. Such findings indicated that the time of throwing in web-based instruction programs affected science inquiry ability, scientific attitude and science achievement of elementary school students. Thus, it will be said that teachers need to teach their students with the class strategies of considering various scientific elements revealed at the time of throwing in web-based instruction programs.

• Journal of The Korean Astronomical Society
• /
• v.40 no.4
• /
• pp.123-125
• /
• 2007

NGC 1333 is a nearby star forming region, and IRAS 4A and IRAS 4BI are low-mass Class 0 protostars. IRAS 4A is a protobinary system. The NGC 1333 IRAS 4 region was observed in the 22 GHz water maser with a high resolution (0.08") using the Very Large Array. Two groups of masers were detected: one near A2 and the other near BI. Most of the masers associated with A2 are located very close (< 100 AU) to the radio continuum source. They may be associated with the circumstellar disk. Since no maser was detected near AI, the A2 disk is relatively more active than the Al disk. Most of the masers in the BI region are distributed along a straight line, and they are probably related with the outflow. As in many other water maser sources, the IRAS 4 water masers seem to trace selectively either the disk or the outflow. Considering the outflow lifetimes, the disk-outflow dichotomy is probably unrelated with the evolutionary stage of protostars. A possible explanation may be that both the outflow-maser and the disk-maser are rare phenomena and that detecting both kinds of maser around a single protostar may be even rarer.

• Journal of The Korean Astronomical Society
• /
• v.36 no.3
• /
• pp.123-144
• /
• 2003

The 8m class telescopes in the ground-based optical astronomy together with help from the ultra-sharp eye of the Hubble Space Telescope have enabled us to observe forming galaxies beyond red shift z = 5. In particular, more than twenty Ly$\alpha$-emitting galaxies have already been found at z > 5. These findings provide us with useful hints to investigate how galaxies formed and then evolved in the early universe. Further, detailed analysis of Ly$\alpha$ emission line profiles are useful in exploring the nature of the intergalactic medium because the trailing edge of cosmic reionization could be close to z $\~$ 6 -7, at which forming galaxies have been found recently. We also discuss the importance of superwinds from forming galaxies at high redshift, which has an intimate relationship between galaxies and the intergalactic medium. We then give a review of early cosmic star formation history based on recent progress in searching for Ly$\alpha$-emitting young galaxies beyond red shift 5.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2003.04a
• /
• pp.123-123
• /
• 2003

In order to study gene expression transcribted during the embryo development, we constructed a cDNA library of embryogenic callus induced from cotylendon of Korean ginseng and generated expressed sequence tags (ESTs) of 3,359 clones randomly selected. The ESTs could be clustered into 1,910 (59.1%) non-redundant groups. Similarity search of the non-redundant ESTs against public non-redundant databases of both protein and DNA indicated that 2,217 groups show similarity to genes of known function. These ESTs clones were divided into eighteen categories depending upon gene function. Most abundant transcripts were ribosomal protein small subunit 28kDa(40), tumor-related protein(35), metallothionein (31), small heat-shock protein class 18.6K(24), and cyclophilin(20). There are no useful informations of gene expression during the embryo development in Korean ginseng. These results could help to understand the embryo development in Korean ginseng.

• Steel and Composite Structures
• /
• v.30 no.2
• /
• pp.123-140
• /
• 2019

This paper presents experimental study on effects of width-to-thickness ratio and loading history on cyclic rotational capacity of H-shaped steel beams subjected to pure bending. Eight Class 3 and 4 H-shaped beams with large width-to-thickness ratios were tested under four different loading histories. The coupling effect of local buckling and cracking on cyclic rotational capacity of the specimens was investigated. It was found that loss of the load-carrying capacity was mainly induced by local buckling, and ductile cracking was a secondary factor. The width-to-thickness ratio plays a dominant effect on the cyclic rotational capacity, and the loading history also plays an important role. The cyclic rotational capacity can decrease significantly due to premature elasto-plastic local buckling induced by a number of preceding plastic reversals with relative small strain amplitudes. This result is mainly correlated with the decreasing tangent modulus of the structural steel under cyclic plastic loading. In addition, a theoretical approach to evaluate the cyclic rotational capacity of H-shaped beams with different width-to-thickness ratios was also proposed, which compares well with the experimental results.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.12
• /
• pp.123-134
• /
• 2018

The purpose of this study was to analyze the space of upper class housing in Andong through the oral life history of women in terms of sexual life. Even though the living was centered on women, the women of Joseon were alienated from the history. For this reason, the life history of head family housing was not recorded in the language of women, and often passed on orally. Also sexual life is a important part in daily life, but it is hard to be recorded or mentioned in Confucian society, and there is not much space research related to sexual life. Now there is not a lot of head family housing left, and the number of people who can tell the life history which is not recorded and the storyteller is also decreasing. From now on, I will record what I have experienced or passed through interviews of the residents living in head family housing and then analyze the characteristics of the sexual life.

• Tribology and Lubricants
• /
• v.39 no.4
• /
• pp.123-132
• /
• 2023

In this study, the expansion, stress, and operating clearance of bearing elements during operation are observed using the inner/outer ring temperature test data of a 3.0×10⁶ DN-class roller bearing. The operating clearance characteristics of inner-/outer-ring cooling (IORC) bearings are compared to those of inner-ring cooling (IRC) bearings. For IRC bearings, the thermal expansion of the outer ring is the most important factor in clearance variation. As a result, the operating clearance is less than the initial clearance of 61 ㎛, and the operating clearance decreases to 0.5 ㎛ at 25,500 rpm. Conversely, the temperature of the outer ring of IORC bearings is lower than that of IRC bearings, so the operating clearance is kept smaller. When the coolant flow rate to the outer ring is approximately 1.5 to 2.0 L/min, the temperature difference between the inner and outer rings is minimized and the operating clearance is maintained at a significantly lower level than IRC bearings. Small operating clearances are expected to be effective in reducing cage slip and skid damage in roller bearings. The results and analysis procedures of this study can be utilized to design of bearing clearance, lubricant flow rate, and assembled interference in the early design stage of aerospace roller bearings.

• Journal of Oral Medicine and Pain
• /
• v.48 no.3
• /
• pp.123-130
• /
• 2023

This case report describes the orthodontic treatment of a patient with severe anterior open bite and skeletal class II malocclusion with temporomandibular joint (TMJ) osteoarthritis (OA) of the left condyle. The 21-year-old male patient had open-bite malocclusion, mild crowding, and protrusion of the anterior teeth. Mild erosive changes were detected in the anterior part of the left mandibular condyle on cone-beam computed tomography; however, because no clinical symptoms were present, orthodontic treatment was performed. It is imperative to consider the potential implications of orthodontic treatment on the stability of the TMJ throughout the duration of treatment, as any instability can exacerbate TMJ OA. Hence, it is crucial to opt for the least invasive treatment modality available. In this regard, orthodontic treatment using a skeletal anchorage system as an alternative to conventional orthognathic surgery for patients with open bite holds great promise, as it not only ensures mandibular stability but also significantly ameliorates the open-bite condition.

• Journal of Climate Change Research
• /
• v.6 no.4
• /
• pp.319-330
• /
• 2015

This study was carried out to predict the optimal growth site and estimate carbon stocks of Quercus acuta, evergreen broad-leaved trees in warm temperate zone according to climate change. The criterion for the optimal site prediction was created by quantification method with quantitative and qualitative data, collected from growth factors of stands and environmental factors of survey sites of 42 plots in Q. acuta by study relationship between growth of tree and site environmental factors. A program for the optimal site prediction was developed by using GIS engine tools. To prediction of the suitable growth site of Quercus acuta, developed program in this study applied to Wando in Jeollanam-do, distributing a various evergreen bread-leaved trees of warm temperate zone. In the results from analysis of the optimal site prediction on Q. acuta, the characteristics of the optimal site showed as follows; site environmental features of class I (the best site class for Q. acuta) was defined as 401 ~ 500 m of altitude, $21{\sim}25^{\circ}$ of slope with above hillside, residual of deposit convex of slope type with west of aspect. The area and carbon stocks of optimal site prediction by class for Q. acuta in classI showed 147.1 ha (2.5%), total 316.5 tC/ha, total $1,161tCO_2/ha/yr$ of class I, 2,703.5 ha (46.3%), total 5,817.4 tC/ha, total $21,331tCO_2/ha/yr$ of class II, 2,845.5 ha (48.6%), total 6,123.0 tC/ha, total $2,845.5tCO_2/ha/yr$ of class III and 153.7 ha (2.6%), total 330.7 tC/ha, total $1,213.7tCO_2/ha/yr$ of class IV.

• Journal of Korean Elementary Science Education
• /
• v.35 no.1
• /
• pp.123-135
• /
• 2016

Interest is one of the important factors in science education. The purpose of this study was to investigate factors affecting the follow-up interest of elementary school students on topics of 'Small Organisms' World'. The follow-up interests of the students on the topic were grouped into three categories; the developed-expanded-deepened (EDD), the simply expanded and maintained (SEM), and the stoped or decreased (SD) types. Each types had specific distinguishing features. Through the examination of students' responses and the in-depth interviews, the factors affecting on the follow-up interests of the students were analyzed. The factors were classified into two types of the external factor and the internal one. While the external factors were mainly related to the instructional materials used in science class and teaching methods, the internal factors were related to the desire for knowing, prior knowledge, students' experience and attitude toward the topics of science. In relation to the types of the follow-up interests, these factors were affected by different causes. The EDD type was most affected by internal factors, such as desire for knowing and prior knowledge. The SEM type was shown to be most affected by external factors, such as instructional materials. The SD type was mainly influenced by external factors, such as teaching methods. From the analysis of internal factors, it was revealed that the attitude and the prior knowledge about the topic are related with the follow-up interests. There was a positive relationship between the levels of science attitude and science knowledge. The students who had EDD type had a higher level of attitude and knowledge. However, there were some students who had higher level of scientific knowledge with SD type. The results of in-depth interviews showed that they were influenced by negative perceptions about science and stress on their grades. In conclusion, each follow-up interest type were caused by the external factors contained in the processes of the science class and the internal ones associated with the individual features and were influenced by the science class. So, the teacher should help the students be able to have the EDD type of follow-up interest which is persisted even after the completion of the science curriculum. For this, when the teachers design science curriculum and plan lesson, they should consider both internal and external factors significantly influencing the students' follow-up interests.