• Journal of the Korean Society of Safety
• /
• v.29 no.4
• /
• pp.54-60
• /
• 2014

This paper describes electric shock accidents on a 4.16 kV class circuit breaker for power plant. Electric shock accidents mostly involve damage of human life, in comparison with electrical fire, rate of human death tend to be higher in electric shock accidents. Specially, in a high voltage facilities rate of human death comprised about 43.7% by electric shock accidents. If electric shock accidents happen in a 4.16 kV class circuit breaker for power plant, then the power plant discontinue power production. Electric shock accidents in a power plant have a great ripple effect such as an electric power shortage. In this paper, we analyzed electric shock accidents on a 4.16 kV class circuit breaker for power plant. From the analysis results, we confirmed a cause of electric shock accidents on a 4.16 kV class circuit breaker, it happened by defect of interlock equipment or occurrence of breakdown between first feeder contactor and shielding plate. In order to reduce electric shock accidents on a 4.16 kV class circuit breaker, the power plant should consider improvement of interlock equipment and insulation of feeder contactor in circuit breaker.

• The korean journal of orthodontics
• /
• v.14 no.2
• /
• pp.233-239
• /
• 1984

The author studied on the tongue position, tongue space and intermaxillary space at 4 groups; normal occlusion 30 cases, Angle's Class I bimaxillary protrusion 29 cases, Angle's Class II malocclusion 26 cases, Angle's Class III malocclusion 26 cases. This study used the data from cephalometric films of female subject aged from 16 to 23 years. Following results were obtained; 1. Dorsal height in Angle's Class III malocclusion was greater than normal occlusion. 2. Anterior Intermaxillary Height in Angle's Class I bimaxillary protrusion and Angle's Class III malocclusion was greater than normal occlusion. 3. Tongue space in Angle's Class I bimaxillary protrusion was greater than normal occlusion. 4. The ratio of the tongue space to the intermaxillary space (T.S./I.S.) in Angle's Class II malocclusion was greater and the ratio in Angle's Class III malocclusion is lesser than normal occlusion.

• Journal of Korean Elementary Science Education
• /
• v.29 no.4
• /
• pp.451-464
• /
• 2010

This study examined the perception of teachers and students on the practice of elementary science class. For this study, an examination tool was made by extracting characteristics of good science class through precedent study investigation and revising it in a questionnaire form of a Likert scale, and conducted to 194 elementary teachers and 320 elementary students. As a result of the study, teachers generally perceived science class positively and teachers with career more than 6 years thought it more positively than them with career less than 5 years. Consequently students have a substantially positive perception level about the practice of the elementary science class, and students of 3th and 4th grade perceived science class positively than 5th and 6th grade in all domains. Finally when analyzing perception difference between teachers and students about the practice of the elementary science class, it appeared that students perceived science class more positively than teachers in most questions.

• Journal of Technologic Dentistry
• /
• v.42 no.4
• /
• pp.394-401
• /
• 2020

Purpose: The present study is an analysis of the extents of class satisfaction of college students who had applied the design thinking technique to capstone design class. Methods: The experimental method involved an analysis of 122 cases of data where advance and post replies were performed for the subject by students who had applied the design thinking technique and students who had not. The students involved had attended the capstone design class as a junior in the Department of Dental Technology at D University. Results: In the satisfaction with performance process of the capstone design class, five questions among nine had a high positive rating, while all eight questions on the satisfaction with performance methods had a high negative rating. Among ten questions on subjective learning outcomes, six showed a high positive rating. After the application of the design thinking class method, all mean values of the group with the application were higher than the group with no application in satisfaction with performance process, satisfaction with performance method, and subjective class outcomes. Hence, the design thinking class did have positive effects on the students' improvement of class. Conclusion: Based on the results of the study, it is implied that the considerations about diverse class composition methods and operation methods capable of improving the students' satisfaction are needed for efficient operation of the capstone design class.

• The korean journal of orthodontics
• /
• v.52 no.6
• /
• pp.432-438
• /
• 2022

Objective: To compare crown-root angulations of the permanent maxillary anterior teeth in skeletal Class I, Class II, and Class III Korean malocclusion patients using cone-bean computed tomography (CBCT) images. Methods: Sixty CBCT images were collected from orthodontic patients archive based on skeletal Class I (0˚< A point-nasion-B point angle [ANB] < 4˚), Class II (ANB ≥ 4˚), and Class III (ANB ≤ 0˚) to have 20 samples in each group. Mesiodistal crown-root angulation (MDCRA) and labiolingual crown-root angulation (LLCRA) were evaluated after orientation of images. Crown-root angulations were compared among Class I, Class II, and Class III groups and among the maxillary anterior teeth in each group. Results: LLCRAs of the maxillary central incisor and the lateral incisor were significantly lower in Class III group than those in Class I group. However, those of the canine showed no significant differences among groups. MDCRAs of the maxillary anterior teeth did not significantly differ among groups either. Conclusions: Our results suggest that skeletal Class III malocclusion might affect LLCRA of the maxillary incisors, especially the central incisor.

• Journal of Technologic Dentistry
• /
• v.39 no.4
• /
• pp.263-273
• /
• 2017

Purpose: This study aimed to explore the relations between class distracting factors and class satisfaction of the dental technology students and then provide a primary data to help further related studies and develop educational programs with which instructors can efficiently manage their classroom. Methods: For this study we have conducted a survey started from the beginning of May 2017 to the end of June. The subjects of the survey were Dental Technology students of D-city, K-city, W-city, selected by random sampling method. The questionnaire was self-administrated and 437 valid results were chosen for our analysis among 450 distributed questionnaires. Results: The results of the research was as follows. Firstly, The overall average point of class distracting factors was 2.5 point. The environmental factors were the highest point as 2.59 and as for the subcategories tiredness and drowsiness was the highest point as 2.76. Secondly, The overall average point of class satisfaction turned out 3,88 point and compliance with class and attitude factors gained the highest point as 4.06. Of the subcategories strict roll checking was the highest point as 4.17. Thirdly, As for class distracting factors from general characteristics a statistical significance was shown as follows; 'instructor factor'(p<.01), 'learner factor'(p<.05), 'total class distracting factor'(p<.05) in the area of gender, 'environmental factor'(p<.001), 'total class distracting factor'(p<.01), 'learner factor'(p<.05), 'instructor factor'(p<.05) in the area of gender 'learner factor'(p<.001), 'instructor factor'(p<.001), 'environmental factor'(p<.001), 'total class distracting factor'(p<.01) in the area of class grade, 'environmental factor'(p<.05) in GPA. Fourthly, A statistical significance, a negative correlation (p<.01) were shown between class distracting factors and class satisfaction. Class distracting factor that especially affects the class satisfaction was instructor factor(p<.001) and the explanatory power of the model turned out 14.7%, which was statistically meaningful (p<.001). Conclusion : Results of this study reveal that instructor factor is the key to class satisfaction of the students. So it is crucial that the instructor faithfully prepare for the class to reinforce the students' learning. Additionally further studies should be followed with more subjects and newer perspectives to develop innovative teaching methodology.

• International Journal of Advanced Culture Technology
• /
• v.11 no.3
• /
• pp.106-112
• /
• 2023

This study proposes learner participatory activities for learner-centered college liberal arts classes. In addition, it analyzes learners' perceptions of and satisfaction with learner-centered classes and identifies the issues that must be considered when planning learner-centered activities for college liberal arts classes. The study used a learner-centered participatory activity in which participants created a 4-cut cartoon addressing a specific theme. An open-ended questionnaire was administered to identify learners' attitudes about and satisfaction with the learner-centered classes. It showed that most learners (87.5%) were highly satisfied with the 4-cut cartoon creation activities in the learner-centered participatory class. Learners identified the burden- free nature of the class activities, the fact that they improved their understanding of class content, and that they were fun (not boring) as the main reasons they found the class activities satisfying. In liberal arts English classes, more diverse participatory class activities should be developed to arouse interest and motivation of learners and encourage learners' participation.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2023.01a
• /
• pp.177-179
• /
• 2023

본 연구에서는 사회복지시설 종사사의 직무만족도 유형을 살펴보고 유형별 예측변인과의 영향관계를 검증하였다. 이러한 연구목적을 검증하기 위해 보건복지부의 '사회복지시설 실태조사'(2014년) 데이터에서 직무만족도 변인에 모두 응답한 11,660명을 최종 분석하였다. 잠재프로파일 분석결과, 사회복지사의 직무만족도 유형은 4집단으로 나타나 '최상 직무만족도집단', '중상 직무만족도집단', '중간 직무만족도집단', '최하 직무만족도집단'으로 명명하였다. 다항로지스틱 분석결과, CLASS4(최상 직무만족도집단)를 준거집단으로 하여 CLASS1(최하 직무만족도집단)과 비교해 노동강도대비 보수수준 평가, 타직종대비 보수수준 평가, 시설안전도, 인권보장도를 높게 인식할수록 CLASS4(최상 직무만족도집단)에 속할 확률이 높아지는 것으로 나타났다. 다만, 이직의사는 낮을수록 CLASS4(최상 직무만족도집단)에 속할 확률이 높아지는 것으로 나타났다. CLASS4를 준거집단으로 하여 CLASS2집단, CLASS3집단도 비교분석 하였다.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.47 no.4
• /
• pp.666-683
• /
• 2023

This research aims to develop based clothing design process tailored to the industry-university collaborative setting and apply it in a fashion design class. into three distinct phases: designing and organizing our fashion design class, conducting our class at a university, and gathering student feedback. First, we conducted a literature review on employing new technologies in traditional clothing design processes. We consulted with industry professionals from the Samsung C&T Fashion Group to develop an AI-based clothing design process. We then developed in-class learning activities that leveraged fashion brand product databases, a supervised learning AI model, and operating an AI-based Creativity Support Tool (CST). Next, we setup an industry-university fashion design class at a university in South Korea. Finally, we obtained feedback from undergraduate students who participated in the class. The survey results showed a satisfaction level of 4.7 out of 5. The evaluations confirmed that the instructional methods, communication, faculty, and student interactions within the class were both adequate and appropriate. These research findings highlighted that our AI-based clothing design process applied within the fashion design class led to valuable data-driven convergent thinking and technical experience beyond that of traditional clothing design processes.

• The korean journal of orthodontics
• /
• v.25 no.3 s.50
• /
• pp.299-310
• /
• 1995

The purpose of this study is to know about the positional change of second molar when orthodontic treatment is performed. To know about it, we andlysed cephalogram pre. and post treatment for 54 adult patients who werefinished orthodontic treatment by banding to the first molar and classify them into 4 groups Class I extraction group 15, Class I nonextraction group 12, Class II group 13, class Class III group 14. The following conclusions were obtained : 1. In the extraction group of Class I , mandibular second molar showed less extrusion and mon distal inclination than first moarl. But maxillary second molar showed more or less extrusive and mesial inclination to much the same degree of first molar. 2. Inthe non-extractio group of Class I, mandibular second molar in intrusive to first molar, it showed smilar distal inclination to first molar. But maxillary second molar is extrusive similarly to first molar. 3. In the group of Class II , mandibular second molar is less extrusive than first molar and maxillary second molar is more extrusive than first molar. 4. In the group of Class III, mandibular second molar showed similar extrusion to first molar and more distal inclination than first molar. But maxillary second molar showed less extrusion than first molar. 5. A comparision of the positional change of second molar among groups : The change of distance from FH plane to funcation point of maxillary second molar is the difference between Class I extraction group and Class II group, Class I extraction group and Class III group. The change of maxillary second molar to palatal plane and occlusal plane is the difference between Class I extraction group and Class III group. And the change of distance from mandibular plan to furcation point of mandibular second molar is difference between Class I extraction group and non-extraction group, Class I non-extraction group and Class II group, Class I non-extraction group and Class III group. But the change of angle of mandibular second molar to mandibular plane and occlusal plane is make no difference in among groups.