• Journal of the Korean Ceramic Society
• /
• v.28 no.4
• /
• pp.315-323
• /
• 1991

The preparation of zirconium carbide powders by the halogenide process of ZrCl4-C-Mg system (1:1:2, molar ratio) was studied between 300。 and 120$0^{\circ}C$ under Ar gas flow (200 mι/min). The formation mechanism and kinetics of zirconium carbide and characteristics of the synthesized powder were examined by TG-DTA, XRD, SEM and PSA. 1) The formation mechanism of zirconium carbide were as follows, above 30$0^{\circ}C$ ZrCl4(S)+Mg(s)longrightarrowZrCl2(s)+MgCl2(s) above 40$0^{\circ}C$ ZrCl2(S)+Mg(s)longrightarrowZr(s)+MgCl2(s) above 50$0^{\circ}C$ Zr(s)+C(s)longrightarrowZrC(s) 2) The apparent activation energy of the reduction-carbonization at temperature of 800$^{\circ}$to 100$0^{\circ}C$ was 11.9 kcal/mol. 3) The lattice parameter and the crystallite size of ZrC which was produced from the mixture powder of ZrCl4, C and Mg (1:1:2, molar ratio) at 100$0^{\circ}C$ for 1 h were 4.700A and 180A, respectively. 4) The powders obtained from the mixture powder of ZrCl4, C and Mg(1:1:2, molar ratio) at 100$0^{\circ}C$ for 1 h were agglomerate with the average size of about 13${\mu}{\textrm}{m}$ in SEM micrograph.

• Magazine of the Korea Concrete Institute
• /
• v.7 no.1
• /
• pp.89-96
• /
• 1995

본 연구는 시멘트 경화체 중의 Cl 고정화 메카니즘을 규명하는 연구의 일환으로 시멘트의 C3A 함유량에 따른 Cl 고정화 효과를 세공용액 분석방법에 의해 조사한 것으로 C3A함유량 0.46 9.65%의 4가지 시멘트와 C3A를 함유하지 않은 초속경 시멘트 페이스트를 밀봉용기내에서 양생시켜 재령 28일에 세공용액을 추출하여 세공용액 중의 Cl 과 OH 농도를 측정, C3A함유량이 Cl 고정화에 미치는 영향을 검토한 것이다. 연구결과 세공용액 중의 Cl 농도는 NaCl 혼입량에 관계없이 시멘트 중의 C3A량이 증가함에 따라 낮아져 시멘트 경화체 내에서 Cl 의 고정화에 C3A가 매우 효과적임을 알 수 있었다. 세공용액의 Cl /OH 는 Cl 혼입량이 시멘트 중량의 0.3%인 경우 강재부동태막을 파괴하는 0.3보다 낮았으며 X선회절분석에 의해 C3A에 의한 고정화 메카니즘은 프리델씨염(Friedel's salt)의 생성에 의함을 확인하였다.

• Advances in materials Research
• /
• v.6 no.3
• /
• pp.303-316
• /
• 2017

In this article, novel olefin polymerization catalyst with lower cost and simple synthetic process were developed, $ArOTiCl_3$ complexes [$(2-OMeC_6H_4O)TiCl_3(C1)$, $(2,4-Me_2C_6H_3O)TiCl_3(C2)$, $TiCl_3(1,4-OC_6H_4O)TiCl_3(C3)$, $TiCl_3(1,4-OC_6H_2O-Me_2-2,5)$ $TiCl_3(C4)$] and corresponding $(ArO)_2TiCl_2$ complexes [$TiCl_2(OC_6H_4-OMe-2)_2(C5)$ and $TiCl_2(OC_6H_3-Me_2-2,6)_2(C6)$] have been synthesized by the reaction of $TiCl_4$ with phenol, all these complexes were well characterized with $^1H$ NMR, $^{13}C$ NMR, MASS and EA. When combined with methylaluminoxane (MAO), the $ArOTiCl_3/MAO$ system shows high activity for ethylene copolymerization with 1-octene and copolymer was obtained with broaden molecular weight distribution (MWD). The $^{13}C$ NMR result of polymer indicates that the 1-octene incorporation in polymer reached up to 8.29 mol%. The effects of polymerization temperature, concentration of polymerization monomer and polymerization time on the catalytic activity have been investigated.

• Journal of the Korean Chemical Society
• /
• v.37 no.7
• /
• pp.655-661
• /
• 1993

The neutral monomeric compounds $[Mo(NO)_2Cl_2(phen)]$ and $[W(NO)_2Cl_2(phen)]$ (phen= 1,10-phenanthroline) have been prepared by reactions of polymeric compounds $[{Mo(NO)_2Cl_2}n],\;[{W(NO)_2Cl_2}n]$ with chelate ligands. Additions of one equivalent of silver(I) perchlorate to these cis-dinitrosyl compounds in acetone solution produce $[Mo(NO)_2(phen)(S)Cl][ClO_4]\;and\;[W(NO)_2(phen)(S)Cl][ClO_4]$ (S = acetone). The homo- and hetero-dinuclear complexes, $[Cl(phen)(NO)_2M(pyz)M'(NO)_2(phen)Cl][ClO_4]_2$ (M = Mo, W) and $[Cl(phen)(NO)_2M(pyz)M'(NO)_2(phen)Cl][C1O_4]_2$ (M = Mo, M' = W) have been prepared by these monocationic complexes with pyrazine ligand respectively. These complexes characterized by elemental analysis, $1^H-\;and\;^{13}C-NMR$, infrared, and UV-visible spectroscopy are reported. The spectral data indicate that homo- and hetero-dinuclear complexes were symmetrical structures of $C_{2v}$.

• Journal of Korean Neurosurgical Society
• /
• v.64 no.6
• /
• pp.913-921
• /
• 2021

Objective : Accurate measurement of T1 slope (a component of T1s minus cervical lordosis [CL]) is often constrained by anatomical limitations. In this situation, efforts should be made to find the exact meaning of T1s-CL and whether there are any alternatives to it. Methods : We enrolled 117 patients who received two-level anterior cervical discectomy and fusion (ACDF). Occipital slope, C2 slope (C2s), C7 slope (C7s), T1, O-C2 angle (O-C2A), C2-7 angle (C2-7A), O-C7 angle (O-C7A), T1s-CL, C7-T1 angle (C7-T1A), and C2-7 sagittal vertical axis were measured. We determined 16° (T1s-CL) as the reference point for dividing subjects into the mismatch group and the balance group, and a comparative analysis was performed. Results : The mean value of C7-T1A was constantly maintained within 2.6° peri-operatively. In addition, C2s and T1s-CL showed the same absolute change (Δ|0.8|°). The mean values of T1s-CL of the mismatch and balance groups were 23.0° and 7.6°, respectively. The five factors with the largest differences between the two groups were as follows : C2s (Δ13.3°), T1s-CL (Δ15.4°), O-C2A (Δ8.7°), C2-7A (Δ14.7°), and segmental angle (Δ7.9°) before surgery. Only four factors showed statistically significant change between the two groups after ACDF : T1s-CL (Δ4.0° vs. Δ0.2°), C2s (Δ3.2° vs. Δ0.7°), O-C2A (Δ2.6° vs. Δ1.3°), C2-7A (Δ6.3° vs. Δ1.3°). A very strong correlation between T1s-CL and C2s was also found (r=|0.88-0.96|). Conclusion : C2s itself may be the essential key to represent T1s-CL. The amounts and directions of change of these two factors (T1s-CL and C2s) were also almost identical. The above phenomenon was re-confirmed once again through the correlation analysis.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.3
• /
• pp.365-370
• /
• 1995

This study was conducted to obtain the basic information on salinity tolerance in Italian Ryegrass. Seeds of 20 cultivars that contained diploid(9 cultivars) and tetraploid(l1 cultivars) types were exposed to eight levels of NaCl concentration ranging from 0 to 350 mM under three levels (15$^{\circ}C$, 2$0^{\circ}C$ and $25^{\circ}C$) of temperature. There were highly significant differences in germination percentage among the levels of NaCl concentration, levels of temperature and cultivars, respectively. Average germination percentage of cultivars in control(no NaCl was higher at 2$0^{\circ}C$(90.1%) than that of $25^{\circ}C$(87.8%) or 15$^{\circ}C$(87.5%). Average germination percentage of cultivars began to decrease over 200mM of NaCl concentration. The degree of decrease in germination was higher at $25^{\circ}C$ than that of 15$^{\circ}C$ or 2$0^{\circ}C$. At 2$0^{\circ}C$, the germination percentage and gemination speed were gradually decreased as NaCl concentration increased. The average germination day was lengthened by the increase of NaCl concentration and temperature. The germination percentage in diploid types were higher than that of tetraploid types but the average germination day in diploid types was shortened more than that of tetraploid types, regardless of temperature and NaCl concentration.

• Korean Journal of Plant Resources
• /
• v.13 no.1
• /
• pp.29-34
• /
• 2000

In order to obtain fundamental information for developing new salinity tolerance soybean cultivars, the germination rate was evalulated with a total of 28 soybean varieties. The germination rate of soybean cultivars was decreased as the NaCl concentration was higher and that by temperature difference was the lowest at 35$^{\circ}C$. the germination rate of 1.2% NaCl treatment of seed shape and size was the highest at 15$^{\circ}C$ but was the lowest at 35$^{\circ}C$ in small seed groups. The germination rates of Gumjungkong, Alchankong, Gumgangkong, Hayumkong, Hwasungpukong, Janmikong cultivars were higher when treated with 1.2% NaCl at 35$^{\circ}C$, but those of Dawonkong, Hannamkong, Kwangankong, Daebaekkong, Danwonkong, Sukwyangputkong, Keunolkong, Bokwangkong, Jangyoupkong cultivars were lower. The germination rate of soybean cultivars was significantly decreased by higher temperature and NaCl concentration.

• Journal of Soil and Groundwater Environment
• /
• v.9 no.2
• /
• pp.11-19
• /
• 2004

Chlorinated and nitroaromatic compounds are non-degradable substances that are extremely toxic and are known to be carcinogens and mutation causing agents. Moreover, the half-lives of substances such as carbon tetrachloride, hexachloroethane and nitroaromatic compounds are several decades. In this study, the optimal conditions to detoxify chlorinated compounds by the reductive degradation were investigated. The following results were obtained in the reductive degradation of CCl$_4$, C$_2$Cl$\_$6/, C$_2$HCl$\_$5/, C$_2$Cl$_4$, and C$_2$HCl$\_$5/ by using Fe, FeS and FeS$_2$ as mediators. CCl$_4$ was reduced to CH$_2$Cl$_3$ and CH$_2$Cl$_2$in anaerobic conditions when FeS was used as a mediator. While the reduction of CCl$_4$ to CHCl$_3$ was rapidly proceeded, the reduction of CHCl$_3$ to CH$_2$Cl$_2$ was occurred slowly. Further reduction to CH$_3$Cl was not observed. Unlike CCl$_4$, C$_2$Cl$\_$6/ was degraded to C$_2$HCl$\_$5/, C$_2$Cl$_4$. C$_2$HCl$_3$ and cis-1,2-C$_2$H$_2$Cl$_2$ by complicated pathways such as hydrogenolysis, dehalo-elimination and dehydrohalogenation. A small amount of C$_2$HCl$\_$5/ was detected only in the early stages of the reduction. However, majority of the C$_2$Cl$\_$6/ was reduced to C$_2$Cl$_4$. cis-1,2-C$_2$H$_2$C1$_2$ was the only product among other possible isomers.

• Journal of Ocean Engineering and Technology
• /
• v.7 no.2
• /
• pp.131-140
• /
• 1993

To study the corrosion fatigue begavior of T.M.C.P. steel, the rotary bending fatigue test with the change of concentration of NaCl solution was carried out. Fatigue life in the corrosion environment is decreased markedly in comparision with that in the air. Fatigue limit in the air was about 225 MPa. In case of 3.5% NaCl solution fatigue life could be expressed as .sigma./sub f/=10,392 * (N/sub f/)/sup -o.2923 . According to the paris's rule, crack growth rates could be expressed as da/dN=2.62.*10/sup -7/ .DELTA. K/sup 1.09/(3.5% NaCl solution), da/dN=1.95 *10/sup -7 .DELTA. K/sup 1.05/(1% NaCl solution), da/dN=2.62 * 10/sup -7/.DELTA./sup 0.72/(0.01% NaCl solution) with da/dN expressed in mm/cycle and .DELTA.K in MPa.GAMMA.m. The crack growth rate in the corrosion environment was highest under 3.5% NaCl solution.

• The Korean Journal of Food And Nutrition
• /
• v.15 no.2
• /
• pp.144-150
• /
• 2002

Sweet persimmon were tested in order to identify their use as secondary material which is excellent in function and taste as food. Samples were soaked for 1 and 5 min with NaCl concentration(0, 1 and 3%) at a certain heating temperature(25, 75 and 95$\^{C}$), and then tannin, vitamin C, flavonol, color intensity, sensory test and textural properties were analysed. The results of the analyses were as follows. Tannins were decreased as heating temperature, NaCl concentration and soaking time were increased, especially, that the control was 420 mg% but decreased 228 and 198 mg% at 95$\^{C}$(1 and 3% NaCl concentration) for 5 min. soaked in each. Vitamin C content also decreased more in higher temperature and NaCl concentration than control(122.4 mg%). Color intensity showed higher value in 1. and b than in heating temperature, NaCl concentration and soaked time longer remarkably, but a value decreased. The peel of sweet persimmons was analyzed myricetin(2.0 $\mu$g/g), quercetin(34.5 $\mu$g/g) and kaemperol(1.1$\mu$g/g), but in pre-treatment sample(95$\^{C}$, 1% NaCl concentration and 5 min. soaked) was showed higher myricetin(9.5 $\mu$g/g) and quercetin(5.5 $\mu$g/g). Textural properties were good in pre-treatment sample(95$\^{C}$, 1% NaCl concentration and 5 min. soaked) such as brittleness, cohesiveness, gumminess and chewiness. In sensory analysis, the pre-treatment samples(95$\^{C}$, 1% NaCl concentration and 5 min. soaked and 95$\^{C}$, 3% NaCl concentration and 1 min. soaked) were showed higher point than others.