• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.6
• /
• pp.132-139
• /
• 2017

A huge amount of de-icing agent is sprayed during winter to promote traffic safety in cold regions, and the quantity of de-icing agent sprayed has increased each year. The main ingredients in commonly used de-icing agents are chlorides, such as calcium chloride($CaCl_2$) and sodium chloride(NaCl). While calcium chloride is mostly used in Korea and sodium chloride is usually used in the U.S. and Japan, all de-icing agents include chloride ions. The chlorides included in sprayed calcium chloride-based de-icing agents have severe adverse effects, including the corrosion of reinforcing steels through salt damage by infiltrating into road structures, reduced structural performance of pavement or damage to bridge structures, and surface scaling, in combination with freezing damage in winter, as well as water pollution. In addition, the deterioration of paved concrete road surface that occurs after the use of calcium chloride-based de-icing agent accelerates the development of visual problems with traffic structures. Therefore, the present study was performed to prepare an environment-friendly liquid de-icing agent through a reaction between waste organic acids and calcium-based by-products, which are industrial by-products, and to analyze the properties of the de-icing agent in order to evaluate its applicability to road facilities.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.7
• /
• pp.1048-1054
• /
• 2014

The purpose of this study was carried out to investigate the cause of sulfur dioxide occurrence, general element composition, sulfur compounds, heavy metals, macro- & micro-minerals, and oxidation-reduction potential (ORP) following baking time course of RS (RS1, RS2, RS3, and RS4) and mudflat solar salts (MSS). Sulfur dioxide ($SO_2$) and sulfite ($SO{_3}^{2-}$) were not detected in MSS or RS. However, sulfate ($SO{_4}^{2-}$) content significantly decreased in RS (29,878.15~36,097.45 ppm) compared to that in MSS (35,601.65 ppm). ORP was 181.15 mV in MSS, and 58.55 mV in RS1. Moisture content was 9.34% in MSS and 0.00% in RS with increased NaCl (94.77~95.77%). Moisture and NaCl contents showed no significant difference in RS. Insoluble and sandy residues were higher in RS than in MSS, whereas Ca and K showed no significant difference. Mg and Cl contents were higher in RS than in MSS. Br level was higher in MSS (628.1 ppm) than in RS (512.72~586.62 ppm), but there was no significant difference in $NO_3$. Heavy metals (Pb, As, and Hg) were more abundant in RS than in MSS, but levels were still safe. These results suggest that MSS and RS may increase protection against from $SO_2$ and $SO{_3}^{2-}$.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.30-30
• /
• 2020

본 연구에서는 여름철에 농업용수(벼농사용)로서 집중적으로 지하수를 사용하는 지역에서 시기별 지하수 사용에 따른 지하수 수질변화를 평가하기 위해 수행되었다. 연구지역은 충남 홍성군 양곡리와 신곡리 일부를 포함하는 면적 2.83 ㎢(283.3 ha)에 해당하는 지역이다. 연구지역 지하수 수질의 공간적 분포 및 시간적 변화 특성 평가를 위하여 2019년 2회(7월, 10월)에 걸쳐 지하수 관정(21개소)에 대하여 조사 및 분석을 수행하였다. 지하수 샘플은 현장에서 온도(T), pH, 용존산소(DO) 및 전기전도도(EC), 산화환원전위(Eh) 등을 측정하였고, 실험실에서 주요 양이온 및 미량원소(Ca, Mg, Na, K, Si, Sr), 음이온(F, Cl, Br, NO₂, NO₃, PO₄, SO₄), 알칼리도, 용존 유기탄소(DOC)와 용존 유기물(DOM) 등을 분석하였다. 지하수 수질조사 결과, 전체의 14~15개소(67~71%)가 Ca-HCO₃ 유형으로 분류되었으며, 다음으로는 Ca-Cl 유형이 4~5개소(19~24%)가 관찰되었다. 얕은 심도의 관정에서 상대적으로 심도가 깊은 관정보다 대부분 성분(TDS, Ca, Mg, Na, K, Cl, SO₄, HCO₃, DOC)에서 높은 농도를 나타내었다. 지하수의 수질자료를 이용하여 다변량통계분석법인 주성분분석(PCA: Principal Components Analysis)과 계층적 군집분석(HCA: Hierachical Cluster Anlaysis)를 수행한 결과, 초기 3개 주요 고유성분(eigenvalue)는 PC1 54.0%, PC2 14.2%, PC3 12.3%로 전체 분산의 88.3%를 설명할 수 있었다. PC1은 Ca, Mg, Na, K, Cl, SO₄, DOC가 주요한 영향 인자였으며 PC2는 HCO₃, NO₃, DO에 영향 받음을 확인하였다. 계층적 군집분석 결과, 연구지역 지하수는 Na-Cl 유형의 C-3 관정을 제외하고는 크게 두 그룹으로 구분되어 졌다. 다변량통계분석의 결과에서도 수리지화학, 동위원소, 용존유기물 등의 특성에서 나타나는 것과 유사한 연구지역의 수질특성을 확인할 수 있었다. 연구지역은 차시기 동안 수질변화는 일부 관정을 제외하고는 유의할 만한 수준으로 관찰되지는 않았고, 지하수 사용에 따른 지하수위 회복도 빠르게 진행되고 있는 것으로 나타났다.

• Polymer(Korea)
• /
• v.39 no.2
• /
• pp.338-345
• /
• 2015

Poly(phenylene oxide) (PPO) and polyether imide (PEI) were sulfonated and aminated to create sulfonated poly(phenylene oxide) (SPPO) and aminated polyether imide (APEI), respectively. Characterization of the SPPO and APEI were performed via measurements of FTIR, thermogravimetry (TGA), swelling degree, ion exchange capacity (IEC), and ion conductivity. Next, the surfaces of these membranes were modified by surface fluorination at room temperature. The surface fluorinated SPPO and APEI membranes underwent characterization again for the mentioned measurements to determine any differences. The 3 types of bi-polar membranes were prepared by varying the IEC of the APEI at a fixed SPPO IEC value, which were applied to the low and high NaCl concentration of feed solution at the different current density, respectively. The hypochlorite concentration derived from the surface fluorinated membranes was dependent on the IEC of the APEI and ranged from 491 to 692 ppm at $80mA/m^2$. At low current density of $5mA/m^2$, the hypochlorite concentrations ranged from 18 to 28 ppm for the 4 hrs surface fluorinated membranes and their durability increased greatly.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.5
• /
• pp.67-76
• /
• 2013

In this study, the inhibitive effect of electrochemical treatment subjected to fresh and hardened concrete and literature reviews in terms of the treatment were performed. In hardened concrete, chloride ions are mixed during casting to destroy the passivity of steel, and then the current was provided for 2 weeks with 250, 500 and $750mA/m^2$. After completion of electrochemical treatment, the extraction of chloride ions was quantified and repassivation of steel was observed. Simultaneously, the equated levels of current density for 2 weeks were applied to fresh concrete. Steel-concrete interface in concrete was observed by BSE image analysis and the concrete properties in terms of the diffusivity of chloride ions and the resistance of steel corrosion was measured. As the result, electrochemical treatment is very effectiveness to rehabilitate the passive film on the steel surface and 63-73% of chloride ions in concrete were extracted by the treatment. As the treatment was applied to fresh concrete, the resistance of steel corrosion was improved due to the densification of $Ca(OH)_2$ layers in the vicinity of steel. However, an increase in the current density resulted in an increase in surface chloride content of concrete.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.2
• /
• pp.407-416
• /
• 2019

The criticical micelle concentration (CMC) was measured by using the UV-Vis method for the micellization of the ammonium type cationic surfactants (DTAB, TTAB, and CTAB) in the aqueous aniline solution. The enthalpy change (${\Delta}H^0$) and entropy change (${\Delta}S^0$) were calculated from the dependence of Gibbs free energy change (${\Delta}G^0$) on the temperature for micellization of the cationic surfactants between 290K and 314K. The effects of n-butanol and sodium chloride on the micellization of cationic surfactants were measured and compared with the other thermodynamic functions. All the free energy changes (${\Delta}G^0$) of the micellization were negative, all the enthalpy change (${\Delta}H^0$) were negative, and all the entropy change (${\Delta}S^0$) were positive values, respectively. The micelle formation of cationic surfactant in aniline solution is a spontaneous exothermic reaction, and the iso-structural temperature calculated from the thermodynamic values show that enthalpy and entropy contribution to the micellization are almost the same for the micellization of cationic surfactants

• Microbiology and Biotechnology Letters
• /
• v.31 no.3
• /
• pp.284-291
• /
• 2003

Bacillus amyloliquefaciens K-42, which produces strongly a fibrinolytic enzyme, Was isolated from Ganjang, a traditional Korean soy sauce. The fibrinolytic enzyme was purified to homogeneity by ammonium sulfate fractionation, ion-exchange chromatography on DEAE-Sephadex A-50, gel chromatography on Sephadex G-100, and gel chromatography on Sephadex G-75 of the culture filtrate of Bacillus amyloliquefaciens K42. The purified enzyme showed the specific activity of 59.4 units per milligram, which was increased by 17.1 fold over the culture broth. And the molecular weight of purified fibrinolytic enzyme was confirmed to be about 45,000 Dalton by sodium dodecyl sulfate polyacrylamide gel electrophoresis. The enzyme activity was relatively stable at pH 4.0-10.0 and the optimum pH was 8.0. The activity of the purified enzyme was increased by $Mg^{2+}$ , Cu$^{2+}$ but the enzyme was totally inhibited by $Ba^{2+}$ $Hg^{2+}$ In addition, the enzyme activity was potently inhibited by EDTA, EGTA and CDTA. It was concluded that the purified enzyme was a metalloprotease. And Km value was 2.03 mg/ml to fibrin.

• Journal of Korea Water Resources Association
• /
• v.40 no.9
• /
• pp.723-734
• /
• 2007

This study was to investigate the settling velocity which is an important factor for the prediction of cohesive deposition under the various densities of particle and dissolved ion addition$(Na^+,\;Cl^-,\;OH^-,\;H^+)$ in rivers, ports, reservoirs and lakes. Settling velocity of suspended fine particles in still water was measured with a pressure sensor (maximum 10 mbar). At the initial concentration of 20g/l of alumina and quartz the average settling velocities were high due to the aggregation behaviour of particles. At this point it was 0.185 mm/s (alumina) and 0.022 mm/s (quartz). Above this initial concentration it was on the decrease owing to the hindered settling. The higher the salinity is, the faster the settling velocity of alumina and quartz is. Furthermore, in an acid condition the average settling velocity of alumina was on the decrease. In an alkaline water, which causes strong flocculation, the average settling velocity of alumina it was observed on the increase. However, in an alkaline medium the low average settling velocity of quartz powder was measured.

• Journal of Environmental Science International
• /
• v.14 no.2
• /
• pp.241-249
• /
• 2005

This study deals with micellar effects on dephosphorylation of diphenyl-4- nitrophenylphosphate (DPNPPH), diphenyl-4-nitrophenylphosphinate (DPNPlN) and isopropylphenyl-4-nitrophenyl phosphinate (IPNPlN) mediated by $OH^\Theta$ or o-iodosobenzoate ion $(IB^\Theta)$ in aqueous and CTAX solutions. Dephosphorylation of DPNPPH, DPNPIN and IPNPIN mediated by $OH^\Theta$ or o-iodosobenzoate ion $(IB^\Theta)$ is relatively slow in aqueous solution. The reactions in CTAX micellar solutions are, however, much accelerated because CTAX micelles can accommodate both reactants in their Stem layer in which they can easily react, while hydrophilic $OH^\Theta\;(or\;IB^\Theta)$ and hydrophobic substrates are not mixed in water. Even though the concentrations $(>10^{-3}\;M)\;of\;OH^\Theta\;(or\;IB^\Theta)$ in CTAX solutions are much larger amounts than those $(6\times10^{-6}\;M)$ of substrates, the rate constants of the dephosphorylations are largely influenced by the change of concentration of the ions, which means that the reactions are not followed by the pseudo first order kinetics. In comparison to effect of the counter ions of CTAX in the reactions, CTACI is more effective on the dephosphorylation of substrates than CTABr due to easier expelling of $Cl^\Theta$ ion by $OH^\Theta\;(or\;IB^\Theta)$ ion from the micelle, because of easier solvation of $Cl^\Theta$ ion by water molecules. The reactivity of IPNPlN with $OH^\Theta\;(or\;IB^\Theta)$ is lower than that of DPNPlN. The reason seems that the 'bulky' isopropyl group of IPNPIN hinders the attack of the nucleophiles.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.5
• /
• pp.529-533
• /
• 2002

The peptides inhibiting angiotensin converting enzyme (ACE) were isolated from the hydrolysate of manila clam (Ruditapes philippinamm) proteins prepared with thermolysin. The thermolysin hydrolysate was pretreated with membrane filter (MW cut-off 10,000) to obtain the peptide fraction with ACE inhibition. The crude peptides were applied to a Sephadex LH-20 column and eluted with $30\%$ methanol. The three active fractions (A, B and C) were collected and concentrated, and then applied to a SP-Toyopearl 650S column equilibrated with distilled water and was eluted with a linear gradient of NaCl concentration (0 to 1 M). The four active fractions (A-1, A-2, B-1 and C-1) were collected and concentrated, and then applied to a SuperQ-Toyopearl 650S column equilibrated with distilled water and was eluted with a linear gradient of NaCl concentration (0 to 1 M). The maximum inhibitory activity was observed in the fraction B-1Q showed the IC_{50} values of 0.748 $\mu$g. The abundant amino acids obtained from active fraction B-1Q were leucine, isoleucine, alanine and threonine.