• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.10a
• /
• pp.382-388
• /
• 2005

Soil vapor extraction(SVE) is an effective and cost efficient method of removing volatile organic compounds(VOCs) and petroleum hydrocarbons from unsaturated soils. However, soil vapor extraction becomes ineffective in soils with low gas permeability, for example soils with air permeabilities less than 1 Darcy. Prefabricated vertical drains(PVDs) have been used for dewatering fine-grained soils for more than 25 years. Incorporating PVDs in and SVE system can extend the effectiveness of SVE to lower permeability soils by shortening the air flow-paths and ultimately expediting contaminant removal. The objective of the work described herein was to effectively incorporate PVDs into a SVE remediation system and to demonstrate a PVDs enhanced SVE system at full scale. The finding from this research will facilitate the design of field PVD-SVE systems in terms by providing insight into the optimal spacing between PVDs, the radius of influence of the wells and the flow rates to be used to capture and extract gas phase contaminants.

• Journal of Korean Society for Atmospheric Environment
• /
• v.30 no.3
• /
• pp.211-222
• /
• 2014

Pork belly meat is one of the most preferred food items for many Korean people. The odorants released from cooking of pork belly meat were measured by three kinds of cooking methods (Charcoal-grill (C), Electric Pan (E), and Gas burner-pan (G)). A total of 16 target compounds including carbonyl compounds, volatile organic compounds, and poly aromatic hydrocarbon were selected and analyzed for comparative purposes. Their emission concentrations were quantified using HPLC-UV, GC-MS, GC-TOF-MS, etc. The gas samples collected by Charcoal-grill cooking showed generally enhanced concentrations of most target compounds among all three kinds of cooking methods. In Charcoal-grill, concentration of benzene, formaldehyde and pyrene went up to 543, 516, and 402 ppb, respectively. It the results are compared in terms of the sum of odor intensity, the highest value (4.25) was also seen from Charcoal-grill. The results of this study confirm that the significantly reduced emission of harmful pollutants can be attained, it pork belly meat is cooked by the Gas or electric pan instead of Charcoal-grill.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.57 no.2
• /
• pp.15-26
• /
• 2015

The purpose of this paper is to develop a software tool, PGA-CC (Projection of hydrology via Grid-based Assessment for Climate Change) to evaluate the present hydrologic cycle and the future watershed hydrology by climate change. PGA-CC is composed of grid-based input data pre-processing module, hydrologic cycle calculation module, output analysis module, and output data post-processing module. The grid-based hydrological model was coded by Fortran and compiled using Compaq Fortran 6.6c, and the Graphic User Interface was developed by using Visual C#. Other most elements viz. Table and Graph, and GIS functions were implemented by MapWindow. The applicability of PGA-CC was tested by assessing the future hydrology of South Korea by HadCM3 SRES B1 and A2 climate change scenarios. For the whole country, the tool successfully assessed the future hydrological components including input data and evapotranspiration, soil moisture, surface runoff, lateral flow, base flow etc. From the spatial outputs, we could understand the hydrological changes both seasonally and regionally.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.3
• /
• pp.339-346
• /
• 2016

Semantic search recently been used in the search field. POI is one of the most essential information that make up the geographic information, and many of the geographic information system has POI search function as a basic. In this study, we propose POI semantic search using collective intelligence. For this, we designed and implemented service that constructs empirical information from tag and image, and provides an intuitive spatial navigation experience. For POI search, collective intelligence platform that many users can participate to collect variety information was designed and implemented.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.6 no.2
• /
• pp.46-51
• /
• 2015

Since it is impossible to predict earthquakes, they involve more casualties and property damage compared to meteorological disasters such as heavy snow and heat waves, which can be predicted through weather forecasts. This has highlighted the need for seismic design and reinforcement. Recently, the use of composite materials as reinforcement has surged because steel plate reinforcement and section enlargement are likely to result in increased weight and physical damage to structures. This study evaluates the seismic performance of panels created from composite materials, and their guide systems. The specimens were miniature versions of actual steel structures, and displacement loads were applied in the transverse direction. Seismic performance was found to improve when structures were reinforced with seismic panels.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2006.03a
• /
• pp.79-93
• /
• 2006

It is well known that acoustic emission (AE) is indicator of rock fracturing or damage as rock is brought to failure under the uniaxial compressive loads. In this paper, an experimental study on the source location of acoustic emission on the cylindrical specimens of granite under uniaxial compression test was made. The AE source location was made by measuring the six channel AE data. Comparing to this experiment, the numerical method is applied to model the initiation and propagation of fracture by AE using a numerical code, RFPA (Realistic Failure Process Analysis). This code incorporates the mesoscopic heterogeneity in Young's modulus and rock strength characteristic of rock masses. In the numerical models, values of Young's modulus and rock strength are realized according to a Weibull distribution in which the distribution parameters represent the level of heterogeneity of the medium. The results of the simulations show that RFPA can be used not only to produce acoustic emission similar to those measurements in our experiments, but also to predict fracturing patterns under uniaxial loading condition.

• Journal of Korean Society on Water Environment
• /
• v.20 no.1
• /
• pp.32-36
• /
• 2004

In this study, uptake and translocation of 2,4,6-trinitrotoluene(TNT) by plant in a hydroponic culture was quantified with two indigenous plant species, Aeschynomene indica and Abutilon avicennae on various initial concentrations of TNT ranging from 20 to 80 mgTNT/L. Experiments were sterilized to exclude the activity of microorganisms and conducted in duplicate. Weight loss of two plant species in added TNT culture media was higher than in control. At over 2OmgTNTIL, there appeared to be phytotoxicity from TNT as indicated by severe yellow-chlorosis and increase of falling leaves. TNT removal rate normalized(K) to the plant fresh weight of Abutilon avicennae and Aeschynomene indica was that the higher TNT concentrations resulted in lower TNT removal rate normalized(K) to the plant fresh weight. Approximately 96% of the TNT in viable microflora-hydroponic culture was removed after 96h of the experiments.

• Journal of Korean Society on Water Environment
• /
• v.28 no.2
• /
• pp.219-223
• /
• 2012

The fixed solid catalysts such as glass bead, steel mesh, and $TiO_2$ coated ceramic bead were used to investigate effect of radical production at different frequencies. The radical production rate at 300 kHz was faster than that at 35 kHz without solid, but the tendency was changed with the presence of glass bead. The presence of glass beads create non-continuous points between the solid and liquid phases leading to increased formation of cavitation bubbles. However, the radical production decreased when steel mesh was used at 35 kHz although the surface area of contact with liquid was same when glass bead was used. Hence the solid catalyst did not always enhance the radical production. The radical production using $TiO_2$ coated ceramic bead was dramatically increased at 35 kHz due to the breakage of $TiO_2$ coated ceramic bead. Therefore the radical productions at 300 kHz using fixed solid catalysts generally increased while at 35 kHz the results fluctuated according to the experimental conditions.

• Journal of Korean Society of Water and Wastewater
• /
• v.27 no.4
• /
• pp.439-444
• /
• 2013

Excessive phosphorus in aquatic systems causes algal bloom resulting in eutrophication, DO depletion, decline in recreational value of water and foul tastes. To treat wastewater containing phosphorus including effluent of wastewater treatment plant, the continuous experiments were performed by using electrochemical way. The spherical ZVI and silica sand which act as physical filter are packed at appropriate volume ratio of 1:2. Electric potential is applied externally which can be changed as per the operational requirement. The results indicate that optimum hydraulic retention time of 36 minutes (10 mL/min at 1 L reactor) was required to meet the effluent standards. Lower concentrations of phosphorus (<10 mg/L as phosphate) were removed by precipitation by contact with iron. Thus, additional electric potential was not required. In order to remove high concentration phosphorus around 150 mg/L as phosphate, external electric potential of 600 V was applied to the reactor.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.5 no.3
• /
• pp.37-42
• /
• 2014

Wind turbine tower has a very important role in wind turbine system as one of the renewable energy that has been attracting attention worldwide recently. Due to the growth of wind power market, advance and development of offshore wind system and getting huger capacity is inevitable. As a result, the vibration is generated at wind turbine tower by receiving constantly dynamic loads such as wind load and wave load. Among these dynamic loads, the mechanical load caused by the rotation of the blade is able to make relatively periodic load to the wind turbine tower. So natural frequency of the wind turbine tower should be designed to avoid the rotation frequency of the rotor according to the design criteria to avoid resonance. Currently research of the wind turbine tower, the precise research does not be carried out because of simplifying the structure of the other upper and lower. In this study, the effect of blade modeling differences are to be analyzed in natural frequency of wind turbine tower.