• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.1
• /
• pp.1-10
• /
• 2012

Mobility and quality of service (QoS) are becoming the more important issues in wireless communications. The traditional Internet service is expanding into new access media and applications. Since wireless communication services are accompanied by frequent handovers at remote sites, scalable and fast handover has become a prerequisite for ubiquitous communication. In this paper, the differentiated service (Diffserv) model is deployed in heterogeneous proxy mobile IPv6 (PMIPv6) networks to satisfy the QoS guaranteed service and fast handover requirements. The operational procedures for QoS guaranteed global roaming are presented. In addition, QoS management and handover cost evaluation schemes based on a mobile host's movement scope are proposed. This paper analyzes the reduction in handover delay in a network-based localized mobility management framework. We propose and analyze a PMIPv6 optimized with a global mobile access gateway (G-MAG), which is a network-based entity, to further improve the handover performance in terms of handover delay while maintaining minimal signaling overhead in the air interface among converged heterogeneous wireless networks. The handover signaling procedures with host-based MIPv6 are compared with network-based proxy MIPv6 (PMIPv6) and fast PMIPv6 assisted by G-MAG to show how much handover delay reduction can be achieved. Analytical results show that the handover delay is significantly reduced.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5673-5682
• /
• 2015

Purpose of this study is to examine and investigate the utilization of low-rise floor Pilotis space which is frequently selected as a major planning element in recent high-rise apartment complex and to identify the interrelationship between the placement of Pilotis space in the complex and space utilization frequency by comparing circulation related indicators of Connectivity, Control Value, Global Integration and Local Integration through Space Syntax axial analysis. Conclusions of this study are, first, Pilotis space is not used as a space to improve regional community consciousness because it is mostly used as a 'simple movement space'. Second, regarding space utilization frequency differences in Pilotis space in each apartment building, projecting entry access+pilotis addition type complex shows more significant utilization frequency than pilotis access type complex, and the vandalism phenomenon is observed more often. Third, Pilotis space utilization is related with Connectivity, Control Value, Global Integration and Local Integration which are circulation related indicators in Space Syntax, and Pilotis spaces with high indicator values over 2 tend to show higher utilization frequency and those with low indicator values over 2 tend to show low utilization frequency.

• Journal of Fashion Business
• /
• v.5 no.2
• /
• pp.105-115
• /
• 2001

When restoring a tomb of Songeun, Park Ik that damaged by typhoon in Kobubri, Chungdomyon, Mill Yang, Kyoung Nam in October 2000, a flower designed stone and fresco was discovered. Soneun Park Ik passed the civil service examination in Kongmin dynasty and was consecutively occupied Sajaedogam(司宰少監; regarded as one of second highest official rank). The fresco realistically depicts custom of ordinary people in end of Koryo, beginning of Chosun dynasty that it is considered as an important research material in study of ostumes. Therefore, this research intend to contribute to study of costumes in general public of Koryo that has insufficient study materials through study and analyze of costumes in the fresco with literature research. The number of figures in the fresco is presumed as 26-27 in all but clearly observed figures is only five women and four men and partly damaged figures are two men and two women. Women are worn relatively long yoo that can cover hip as an upper garment and Sang(裳) as trousers. The upper garments are all adjusted to right and has Jikryoung gik (straight collars) but there are strip attached collars or double collars among the Jikryoung gik. The length of Sang reaches to ankle and a waistband is trailed to below the knees. Most of hair are combed in the two sides and made a ring, moreover worn ceremonial coronet, which imply the ceremonial parade. Distinguished from the frescos of Koguryo, there are no women wearing Po(袍) also Yoo with Dae(帶) and without were coexisted. The mens costume is mainly appeared in two types. One(元) is Danryoungpo, Po with round collar and wearing a lozenge shaped crest with a brim, the other is Jikryoung Po, Po with straight collar, and wearing Ballib(拔笠), the latter is a costume of two man presumed as envoys. In the case of Danryoungpo, its length reached to ankle that shows decorum and in Jikryoungpo its length is below the knees that seem to offer practicality for envoys to guide a long journey. Both man and women are in decent cloth with a crest, which simple costume for ordinary people as a Chaksoopo that has comfortable length for movement and narrow sleeves. Songeun Park Ik actively worked under regency of One dynasty that influence of Mongol is seen in mans crest. There are some changes but including womens costume most of cloth are followed Korean traditional costume style.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.8
• /
• pp.13-24
• /
• 2014

A series of trapdoor model tests was systematically performed in order to investigate soil arching. The mobilized soil arching was clearly observed by change of the vertical earth pressure loaded on trapdoor of soil container box. A slow decent of the loading plate at the trapdoor results in loosening zone over the trapdoor and the stress in this loosening zone was transferred to the stationary zone in the vicinity of the trapdoor. In particular, it was observed that the vertical earth pressure rapidly decreased in the loosening zone and increased in the stationary zone at the trapdoor. Both the maximum decreasing rate of the vertical earth pressure in the loosening zone and the increasing rate of the vertical earth pressure in the stationary zone were not influenced by the ground density, but affected by the size of the trapdoor. The loosening zone could be defined by the elliptical configuration, in which the major axis was twice as long as the height of the loosening zone at the center of trapdoor and the minor axis was the same as the width of trapdoor. The height of loosening zone at the center of trapdoor was one and a half times as long as the width of trapdoor loading plate.

• Journal of Digital Convergence
• /
• v.9 no.6
• /
• pp.91-102
• /
• 2011

Smart work is deeply embedded in our contemporary lives. This is called Smart Life. The expansion of communication, caused by smart life is utilized for the political purposes of politicians, political candidates, and political policies. Chiefly, smart life includes improvement in awareness, personal relations, and policy advocacy. Socially, smart life leads the proliferation of issues and civil movement. In particular, smart life has a significant effect on culture. In the case of K-POP, it is disseminated going beyond space time. It enhances economic value added by joining and sharing at the same time. Smart life has numerous advantages such as improving the quality of life, but it might cause inconvenience depending on users because there are differences in acceptance according to generations. Due to the heavy weight on the device, there are some side-effects such as lacking in human thinking, disclosure in private life, lacking in basic securities, increase in information addicts who are anxious when they do not get on the Internet or SNS, and interference with work. However, this inconvenience can change into convenience when users are accustomed to it. Like this, smart life influences politics, economy, society, and culture a lot. Working environment of smart life is a new paradigm, which can generate high performance through working in an exciting and bright atmosphere with easy economy and putting value on results.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.5
• /
• pp.385-392
• /
• 2013

The finite element method has become the most widely used method of structural analysis and recently, the method has often been applied to complex dynamic and nonlinear structural analyses problems. Even for these complex problems, where the responses are hard to predict, finite element analyses yield reliable results if appropriate element types and meshes are used. However, the dynamic and nonlinear behaviors of a structure often include large deformations in various portions of the structure and if the same mesh is used throughout the analysis, some elements may deform to shapes beyond the reliable limits; thus dynamically adapting finite element meshes are needed in order for the finite element analyses to be accurate. In addition, to satisfy the users requirement of quick real run time of finite element programs, the algorithms must be computationally efficient. This paper presents an adaptive finite element mesh generation scheme for dynamic analyses of structures that may adapt at each time step. Representative strain values are used for error estimates and combinations of the h-method(node movement) and the r-method(element division) are used for mesh refinements. A coefficient that depends on the shape of an element is used to limit overly distorted elements. A simple frame example shows the accuracy and computational efficiency of the scheme. The aim of the study is to outline the adaptive scheme and to demonstrate the potential use in general finite element analyses of dynamic and nonlinear structural problems commonly encountered.

• Journal of Korea Water Resources Association
• /
• v.44 no.6
• /
• pp.449-459
• /
• 2011

By examining the experimental results, the critical mean velocity which initiates the movement of riprap is increased with the riprap size in mean diameter, the mean diameter over water depth (d/h), Froude number (Fr), and turbulent shear velocity over critical mean velocity (u*/${\nu}$) which have great correlations among them so these parameters are adopted governing hydraulic stability for riprap. The hydraulic stability equation for riprap is developed by regression analysis. The developed equation is expanded from 0.36~0.73 m/s of experimental range to 0~5.0 m/s for the application in engineering discipline. So many useful relations among those parameters including critical mean velocity are derived by expanding to high Reynolds regions. Mean diameter calculation results by expanding to high Reynolds regions coincide with the calculations of ASCE and USBR at the range of 0~3.0 m/s and the calculation result of ASCE at the range of 3.0~5.0 m/s. The results by developed formulae coincide well with the formulae of ASCE in general and also the results by recently developed existing formulae of hydraulic stability for riprap. Thus, the developed equation has the high applicability in engineering discipline to evaluate the hydraulic stability for riprap.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.390-397
• /
• 2017

The introduction of exotic fish species may reduce the number of native fish species and disturb the aquatic ecosystem. Therefore, measures to block and manage fish species are required. Accordingly, a fish species blocking system using bubbles was developed in this study to block exotic fish species. An experimental channel was produced and the possibility of blocking such exotic fish species was evaluated. The bubble generator is a system that produces a bubble curtain by generating air with an air compressor that blocks fish species. Bluegill, which is an exotic fish species in the country, was tested with this generator. The size of bluegill was between 0.10 m and 0.15 m and the depth of water was maintained at 0.70 m. The flow velocity of the experiment channel was classified into 3 levels (0.20 m/s, 0.10 m/s, and 0.05 m/s) considering the natatorial ability of the fish species. The results revealed that 70.07% of bluegill showed movements to swim upstream before applying the bubble, but it is considered that the ascending rate would be higher given that the fish species thinks downstream is a habitat and showed almost no movement. However, when the blocking facility was installed, most fish species showed movements to return to the downstream again by the bubble curtain, indicating a very high blocking effect. In particular, when the generating bubble was terminated, the fish species swam back to the upstream area very soon, so the fish species blocking effect using the bubble was excellent.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.173-178
• /
• 2016

When a ballast track of a high-speed train is constructed on a bridge, the displacement of the bridge decks can occur because they are not fixed to the rails. Moreover, relative displacements occur between the bridge and rails caused by temperature changes and external loads. The current longitudinal resistance criteria (UIC Code 774-3, KR C-08080) on ballast tracks with continuous welded rails (CWRs) do not take into account the longitudinal movement of the bridge and the frictional force between the ballast and slabs. In addition, the magnitude of the longitudinal resistance, k, is calculated somewhat conservatively and, (therefore?) it acts as an unfavorable element in the design of long span and continuous railway bridges. Thus, in order to replicate the actual behavior more effectively, the longitudinal resistance of CWRs should take into account the additional rigidity between the slab and track. In this study, the longitudinal resistances of the ballasted track on the bridge were analyzed by carrying out an experimental study with a test setup designed to simulate the deck and bed track. In the test results, the maximum longitudinal resistances of the tests were similar to the resistances of the current codes, however, the measured longitudinal stiffness designed to limit the displacement of the tests were much smaller in comparison with the longitudinal stiffness on the codes.

• Journal of Science and Technology Studies
• /
• v.2 no.1 s.3
• /
• pp.107-134
• /
• 2002

Recently, society's relationship with science is in a critical phase. There was never a time when the issues involving science were more exciting. Many people are deeply uneasy about the safety and ethics of bio-technology. On the other hand, this could be interpreted as a dynamic process in which a new relationship between science and public is reshaping. And in this new relationship citizen participation in science is not a option but a necessity. This article is a case study of 1970's re-combinant DNA debate. Early 1970's bio-technology saw the emergence of an enormously powerful new methodology, recombinant DNA technology. But, at the outset, this technology posed many potential dangers. Concern over possible hazards prompted hot debates and conflict between leading scientists and community, In this process Cambridge Laboratory Experiment Lion Review Board (CERB) is organized by Cambridge City Coun il for assessing the possible risk of recombinant DAN technique. This is one of the first citizen-initiated participation movement in bio-technology. And the debates has come to be a principal focus for many of the most important questions concerning citizen participation in science. This study make a attempt to analyze CERB case. In conclusion, we can confirm the possibility of civil participation in science policy making and decision making from CERB case study. Still, we also realize the limit of CERB case.