• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.3
• /
• pp.202-209
• /
• 2014

In this paper, we analyzed the effects by multi-stacking superstrates over the circular-polarized patch antenna. The previous works considered a single-layered superstrate or a superstrate with multiple layers, and did not almost consider the axial ratio at the performance analysis. First, the effect of center frequency shift is analyzed by the variation of air-gap height between patch antenna and superstrate. The center frequency is down-shifted at the smaller air-gap height and has almost the same frequency as patch antenna at the air-gap height of $005{\lambda}_0$. Second, the antenna performance is analyzed by multi-stacking superstrates with the air-gap height of $005{\lambda}_0$. As the number of multi-stacked superstrates increase, antenna gain has a linear increase and axial ratio is exponentially deteriorated. In addition, it has also been observed that the antenna performance has the same trend with the number of multi-stacked superstrates as the thickness of superstrate increases. Finally, we confirmed that it is possible to design the CP patch antenna with the scalable gain and less than 3dB axial ratio by stacking the superstrate.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.293-296
• /
• 2005

This paper presents the design of linear and circular polarization baseball- shaped circular microstrip antenna (BCMA) with 3-dimensional structure using perturbation effect to reduce its size, which runs at 1.575GHz frequency bandwidth. As a result, the size of linear polarized antenna could be reduced up to 23.7% in patch diameter and 41.8% in its area. Linear polarized antenna has -26.04dB of return loss, 69MHz(4.38%) of -l0dB bandwidth, 4.51dBd of gain, and its -3dB beamwidth are 99$^{\circ}$ in E-plane, 83$^{\circ}$ in H-plane. Circular polarized antenna has -17.43dB of return loss, 113.7MHz(7.2%) of -l0dB bandwidth, 2dBd of gain, 2dB of axial ratio and its -3dB beamwidth are 87$^{\circ}$, 86$^{\circ}$ x-axis polarized, 80$^{\circ}$, 84$^{\circ}$ y-axis polarized. It has 82mm of diameter, which is 28.5% of linear polarized CMPA. Therefore, in this paper we verified that baseball-shaped 3-dimensional structure of circular microstrip patch antenna applied with perturbation effect is appropriate for miniaturization.

• Journal of Satellite, Information and Communications
• /
• v.12 no.1
• /
• pp.72-75
• /
• 2017

In this paper, we design the circular slits in the parch antenna for size reduction and high gain working at 900 MHz. Modifying the rectangular type patch, we decrease the antenna real-estate, leading to antenna miniaturization with added circular slits in itself. The antenna is tuned for under -30 dB return loss by adjusting the number of circular slits and their radii, and its design is performed for the maxim bean pattern of 4 dBi gain. Compared with the antenna without circular slits, the designed antenna shows 20 MHz downward shift of frequency, proving that the size reduction is achieved with this antenna design.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.12
• /
• pp.1655-1660
• /
• 2014

In this paper, we propose a design of a triple-band microstrip circular patch antenna. The proposed antenna generates the triple frequency resonance at 1.85GHz(LTE), 2.45GHz(ISM) and 5.5GHz(WLAN). Firstly, we design the dual-band antenna. The dual-band antenna consist of the circular patch, slits, and the slot. The circular patch and slot are designed for dual frequency of 2.45GHz and 5.5GHz, respectively. And then the dual-band antenna is combined with additional arm-shaped structure for the triple-band characteristic. The arm-shaped structure is operated as the dipole. It is designed for lowest frequency of 1.85GHz. Each part of the antenna unites to a new structure. In order to design the proposed antenna automatically and optimally, APSO algorithm is adopted. During APSO, the mismatch of the proposed antenna is resolved. The optimal designed antenna has an acceptable return loss(-10dB) at each bands(i.e, 1.85GHz, 2.45GHz and 5.5GHz).

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.6
• /
• pp.748-754
• /
• 2010

To reduce the computational cost required for assembling vessel fragments using surface geometry, this paper proposes a fast axis estimation method. Using circular constraint of pottery and local planar patch assumption, it finds the axis of the symmetry. First, the circular constraint on each cylinder is used. A circular symmetric pot can be thought of unions of many cylinders with different radii. It selects one arbitrary point on the pot fragment surface and searches a path where a circumference exists on that point. The variance of curvature will be calculated along the path and the path with the minimum variance will be selected. The symmetric axis will pass through the center of that circle. Second, the planar patch assumption and profile curve is used. The surface of fragment is divided into small patches and each patch is assumed as plane. The surface normal of each patch will intersects the axis in 3D space since each planar patch faces the center of the pot. A histogram method and minimization of the profile curve error are utilized to find the probability distribution of the axis location. Experimental results demonstrate the improvement in speed and robustness of the algorithms.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.10
• /
• pp.1837-1844
• /
• 2016

This paper proposes an antenna of the fork type structure that operates in the UWB (Ultra Wide Band) frequency band (3.1 ~ 10.6 GHz). The proposed antenna is attached a circular patch in order to obtain the UWB band characteristics to the fork-type patch antenna. The ground plane is implemented in a arc-shape configuration. The effect of various parameters of the modified fork type radiating patch and partial arc ground plane for UWB operation is investigated. The proposed antenna is made of $34.0{\times}50.0{\times}1.0mm^3$ and is fabricated on the permittivity 4.4 FR-4 substrate. The experiment results shown that the proposed antenna obtained the -10 dB impedance bandwidth 8200 MHz (2.7 ~ 10.9 GHz) covering the UWB bands. This result satisfied the characteristics of ultra-wideband and the proposed antenna will be applicable to an ultra wideband system.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.123-126
• /
• 2005

In this paper, we propose a multiple slotted dual-band square patch antenna with CP(Circular Polarization) characteristic. And we present the simulation and measurement results of the design example. We designed a slotted patch antenna by using computer simulation program, Zeland IE3D, and then some tuning followed with measurements. Measured -10dB bandwidths of $S_{11}$ characteristic are 127MHz($2.346GHz{\sim}2.473GHz$) for the low-band, and 122MHz($3.379GHz{\sim}3.501GHz$) for the high-band, respectively. And measured maximum gains and half-power beamwidths are 6.94dBi, $72.95^{\circ}$ for the low-band at 2.30GHz, 5.78dBi, $76.51^{\circ}$ for the high-band at 3.45GHz, respectively.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.297-302
• /
• 2005

Right hand circularly polarized Ka band microstrip patch array antenna was designed, manufacture and measurement were carried out. In order to lower axial ratio performance sequential rotation array technique was used. With mono-pulse feed There are sum and delta channel. Waveguide to microstrip transition was used. The 512 array antenna was performed which axial ratio is about 1.ldB in the half power beam width and also 1.ldB at the normal direction. Directivity gain of designed antenna is 32dB.

• Journal of electromagnetic engineering and science
• /
• v.7 no.2
• /
• pp.96-101
• /
• 2007

A design of circular polarized(CP) microstrip antenna with a fenced ground is proposed and the equivalent circuit is derived. The antenna consists of a square radiating patch with a pair of truncated comers, a bottom ground and a fenced ground. From conducted experiments, a patch size reduction using the metal fence as large as 25% from the conventional patch structure, has been obtained. The input admittance of the extracted equivalent circuit is shown to agree with that of the measurement. And the design parameters and performance of the proposed antenna are examined by analyzing the fields and circuit behaviors.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.3
• /
• pp.440-444
• /
• 2002

A microstrip patch antenna with circular polarization based on the Sierpinski fractal geometry is proposed. The Sierpinski fractal is composed of 3 equilaterial triangular patch and is easy to produce a circular polarization by sequentially rotation techniques. The characteristics of a 1x3 antenna array from Sierpinski geometry are investigated, i.e. port isolation and AR(axial Ratio).