• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.3
• /
• pp.296-302
• /
• 2009

In this paper, a planar microstrip patch antenna is proposed using the slit on the top layer of a multi-layered structure for GPS application. The proposed antenna has a circular polarization at 1,575.42 MHz. This proposed antenna is fabricated on multi-layered FR4 substrate. The slits embedded on the top plane may yield to lower a resonance frequency and sustain a broad bandwidth. The proposed antenna size is $20{\times}20{\times}4.0\;mm^3$. The measured gain of 0.5 dBi, 10 dB bandwidth(VSWR 2:1) of 70 MHz(4.4 %), and 3 dB axial-ratio bandwidth of 15 MHz(1 %) have been obtained, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.5
• /
• pp.475-485
• /
• 2010

This paper proposes a novel concept for a microstrip resonator that can function as a filter and as an antenna at the same time. The proposed structure consists of an outer ring, an open loop-type inner ring, a circular patch, and three ports. The frequencies where the proposed structure works as a filter and as an antenna, respectively, are determined primarily by the radius of the inner ring and the circular patch. The measured results show that, when the microstrip resonator operates as a filtering device, this filter has about 15.1 % bandwidth at the center frequency of 0.63 GHz and a minimum insertion loss of 1.5 dB within passband. There are three transmission zeros at 0.52 GHz, 1.14 GHz, and 2.22 GHz. In the upper stopband, cross coupling - taking place at the stub of the outer ring - and the open loop-type inner ring produce one transmission zero each. The circular patch generates the dual-mode property of the filter and another transmission zero, whose location can be easily adjusted by altering the size of the circular patch. The proposed structure works as an antenna at 2.7 GHz, showing a gain of 3.8 dBi. Compared to a conventional patch antenna, the proposed structure has a similar antenna gain. At the resonant frequencies of the filter and the antenna, high isolation(less than -25 dB) between the filter port and the antenna port can be obtained.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.609-612
• /
• 2003

For combating multipath fading in wireless radio environment, diversity schemes is useful. In this paper, for performance improvement of polarization diversity system, we analyzed a two-branch polarization diversity at the receiving end of a mobile link when the transmitter emits a circularly polarized wave. And In order to calculate the correlation coefficient considering the XPD(cross polarization discrimination) between the received signals for the two diversity branches, a simple theoretical model of circular polarization diversity is adopted and calculate correlation coefficient. From the analysis results, it is seen that the correlation coefficient of circular polarization diversity evaluated by the XPD is less than that of vertical polarization diversity. And also, we designed and fabricated circular polarization diversity system with microstrip antenna. we analyzed data measured in indoor NLOS environment using fabricated circular polarization diversity system. From the measurement results, it is clearly seen that the diversity effect of circular polarization diversity system is higher 3dB than vertical polarization diversity system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.1
• /
• pp.37-45
• /
• 2000

Though microstrip antenna has several advantages, it makes engineers struggle against the difficulties of narrow bandwidth and scan-blindness with probe-feeding and array configuration. To overcome these disadvantages, stacked patch and cavity-backed structure had been proposed. But this structure can not be analyzed easily because we have no concrete means to analyze it. So the algorithm to analyze the structure should be established to make it useful. This paper explained the algorithm of moment method to analyze the structure and verified it by comparing the calculated and measured results.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.7
• /
• pp.282-287
• /
• 2003

″H″ type resonator has the advantage for the miniaturization of high-T7 superconducting (HTS) microstrip antenna in comparison with the conventional microstrip antenna such as rectangular type or circular type. In this paper we designed miniaturized HTS antennas using this "H"-type resonator and reported the characteristics of our antennas including return loss, bandwidth, radiation patterns, efficiency and so on. To fabricate the "H" type antenna, HTS YBa$_2$Cu$_3$$O_{7-x}$ (YBCO) thin films were deposited on MgO substrates using rf-magnetron sputtering. For comparison between normal conducting antennas and superconducting antennas, the gold antennas with the same dimension were also fabricated. An aperture coupling was used for impedance matching between 50 $\Omega$ feed line and HTS radiating patch. The ″H" type superconducting antenna showed the performance of 1.38 in SWR, 26 % in efficiency, and 13.8 dB in the return loss superior to the normal conducting counterpart.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.3
• /
• pp.1250-1256
• /
• 2017

This paper proposes the design of microstrip patch antennas for dual-band polarization adjustment. The antenna has a multi-layer structure for dual-band operation, and each layer contains a resonating patch with surrounding strips separated into two parts. The antenna polarization is adjusted by varying the separated positions of the strips, while fixing other design parameters. To demonstrate the feasibility, an antenna sample with right-hand circular polarization is fabricated, and its antenna characteristics are measured in a full anechoic chamber. The operating principle of polarization adjustment in the dual frequency bands is also verified by observing near electromagnetic fields and the magnetic surface current density around the antenna.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.7A
• /
• pp.537-546
• /
• 2003

This paper proposes an aperture coupled circular polarized patch antenna operating at ISM band(5GHz). For improving the characteristic and performance of broadband and circular polarization at single circular polarized patch antenna. We designed and analyzed the sequentially rotated arrayed(SRA) using phase delay of 0$^{\circ}$, 90$^{\circ}$, 180$^{\circ}$, 270$^{\circ}$and 0$^{\circ}$, 45$^{\circ}$, 90$^{\circ}$, 135$^{\circ}$. Experimental result, the SRA antenna using phase delay of 90$^{\circ}$and 45$^{\circ}$are improved at the wideband and axial ratio. Also, the SRA antenna using phase delay of 45$^{\circ}$verified that it is better bandwidth and axial ratio than the SRA antenna using phase delay of 90$^{\circ}$.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.8
• /
• pp.1759-1764
• /
• 2015

In this paper, we considered a design method of a circular polarization (CP) antenna for UHF (ultra high frequency) RFID (Radio Frequency IDentification) readers. The antenna is a dual-fed circular microstrip patch which produces right-handed CP. Quadrature hybrid coupler is used for dual feeding. The outputs of the coupler and circular patch are connected through copper wires, and the inductive reactance produced by the connecting wires is compensated by a ring-shaped slot inserted inside the circular patch. The effects of the geometrical parameters of the proposed antenna on the antenna performance are examined, and the parameters are adjusted to be suitable for the operation in North American UHF RFID band (902-928 MHz), which includes domestic UHF RFID band. The antenna is fabricated, and the experiment results reveal a frequency band of 854-993 MHz for a voltage standing wave ratio < 2. The fabricated antenna is connected to a commercial RFID reader, and it showed a good performance of tag identification.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.2 no.2
• /
• pp.11-18
• /
• 1991

In this paper, the analysis of arbitrarily shaped microstrip antennas is described. The analysis method is based on the transmission - line matrix representation for the interior problem and the moment method for the problem along the peripheries of the patch. Using this method, the input impedance and other antenna parameters are calculated and compared with experimental results for a circular and an equilateral triangular microstrip antenna. For all of the results, theoretical and expreimental results are in good agreement and the validity of the method is confirmed. This analysis can also be used to analyze microstrip antennas with shorting pins.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.4
• /
• pp.411-417
• /
• 2008

This paper presents the miniaturization of circularly polarized microstrip patch antenna for UHF-band RFID portable reader. The proposed antenna has a group of four I-slots on a conventional corner-truncated square microstrip patch and it is shown that the antenna size is reduced compared to the antenna without I-slots. A 76 mm by 76 mm small antenna with four I-slots is fabricated with 6.4 mm thick FR4 substrate and its 10 dB return loss bandwidth, the gain and the axial ratio are measured to be $938{\sim}975\;MHz$, $-0.88{\sim}-2\;dBi$, and $3.27{\sim}13.21\;dB$ within the 10 dB return loss bandwidth, respectively.