• 한국전자파학회논문지
• /
• 제19권10호
• /
• pp.1115-1121
• /
• 2008

본 논문에서는 유전체의 유전 상수를 결정하기 위하여 유전체 슬랩을 원통형 공진기에 삽입하여 측정하는 기술을 제안한다. 유전 상수는 빈 공진기와 유전체 슬랩이 삽입된 공진기의 공진 주파수 편차에 의해 측정된다. 특성 방정식은 정확한 필드 해석에 의해 정의되었다 측정 장치는 HP8719A 벡터 네트웍 분석기와 금속 재질의 원통형 공동 공진기를 이용하였다. 이론적인 증명은 실험과 3D 시뮬레이터인 CST사의 MWS 4.0에 의해 확인되었다. 측정 된 결과는 전반적으로 만족하였다. 측정 된 테플론과 베이클라이트의 비유전율은 각각 2.03과 4.44이다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.785-790
• /
• 2000

The resonant frequency of a gas-filled cylindrical Helmholtz resonator in a liquid is obtained analytically. The equation of motion of the resonator is derived by using the condition of equilibrium of forces acting on the mass in the neck of the resonator. The reaction force on the upper side of the cylinder due to the acceleration of external fluid and sound radiation is obtained by using the analytical results for the baffled circular-piston problem. From the frequency response function of the resonator, a formula to predict the resonant frequency of the resonator is derived. It is shown that the resonant frequency of the Helmholtz resonator significantly decreases due to the cushioning effect of gas inside the cavity. Therefore, when a pressure transducer is to be installed in a pin-hole type mounting method, much care should be paid to remove the gas from the cavity.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.459-463
• /
• 2003

A circularly polarized microstrip patch antenna (MPA) using electromagnetic (EM) coupled fed method is analyzed in view of the two types of coupling mechanisms viz. cavity and parasitic type, proposed earlier. The patch-ground plane distance is varied in order to achieve the fore-mentioned types of couplings. For each case of patch-ground plane distance, the offset position of feedline is optimized for perfect matching and the boresight axial ratio (AR) is observed. It is seen that CP operation is possible only for cavity-type coupling (smaller patch-ground plane distances). The simulated results for the boresight AR for the two types of coupling mechanisms are presented.

• 한국산학기술학회논문지
• /
• 제6권5호
• /
• pp.407-411
• /
• 2005

본 논문에서는 원통 실린더 내부의 아래와 윗면에 융기부가 있고 원통의 가운데 면을 따라 슬롯이 있는 구조에 대한 모사 연구이다. 이 연구는 두 융기부나 슬롯의 크기를 조절하여 원통의 크기를 0.3파장으로 줄일 수 있음을 보여주고 있다. CST MWS를 이용한 모사 결과는 이론적인 예측과 비슷한 결과를 보여주고 전기적으로 작은 안테나의 연구에 중요한 역할을 할 것으로 사료된다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권6호
• /
• pp.901-907
• /
• 2008

The measurements of velocity vectors are made in the wake(X/d=8) of a circular cylinder with arc grooves. The experiments are conducted by changing the groove number. groove depth, Reynolds number(Re) and the angle of the first formed groove. We know that the optimum groove angle is 70 degree and the wake velocity profiles are improved at a few conditions. According to vortex shedding frequency distributions. the key solutions to vary the flow field behind the circular cylinder are 70 degree groove angle and more deeper grooves than 0.2mm depth.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.835-840
• /
• 2000

The objective of the present study is to investigate the characteristics of pressure wave propagation of viscous fluid flow in a circular pipe line. The goal of this study is to select the best frequency of each control factor of a circular pipe. We intend to approach a formalized mathematical model by a very exact and reasonable polynomial for fluid transmission lines. and we computed this mathematical model by computer. The results show that the oil viscosity decreased as the length of the circular pipe increases. and The energy of pressure wave propagation decreased as the pipe diameter decreases. The factor is that density of oil was changed resonant frequency. It has been found the viscosity characteristics is changed largely by length of hydraulic pipe and volume of cavity tank.

• Journal of the Korean Physical Society
• /
• 제73권10호
• /
• pp.1502-1505
• /
• 2018

We present a design for hybrid circular Bragg gratings (hCBGs) for efficiently extracting single-photons emitted by InAs quantum dots (QDs) embedded in GaAs. Finite-difference time-domain simulations show that a very high photon collection efficiency (PCE) up to 96% over a 50 nm bandwidth and pronounced Purcell factors up to 19 at cavity resonance are obtained. We also systematically investigate the geometry parameters, including the $SiO_2$ thickness, grating period, gap width and the central disk radius, to improve the device performances. Finally, the PCEs and the Purcell factors of QDs located at different positions of the hCBG are studied, and the results show great robustness against uncertainties in the location of the QD.

• 터널과지하공간
• /
• 제32권1호
• /
• pp.20-29
• /
• 2022

지중공동이 존재하는 지반의 거동은 지반함몰의 위험을 평가할 때 반드시 고려해야 하는 사항이다. 지중공동 주변 지반의 전단강도를 알더라도 공동의 크기와 같은 기하학적 요소와 관련된 불확실성으로 인해 정밀한 분석이 어렵다. 본 연구에서는 지반의 강도 및 공동의 기하학적 조건들을 바탕으로 무차원 안정성 상수를 나타내는 도표를 제안하였다. 이를 위해 수치해석이 수행되었으며 안정성 상수는 지반의 강도 정수인 점착력과 마찰각, 그리고 지중 공동의 크기와 심도를 고려한다. 제안도표는 지반 조건을 바탕으로 현장의 안정성을 추정하는 데 도움이 될 수 있다.

• Journal of Mechanical Science and Technology
• /
• 제20권11호
• /
• pp.1980-1992
• /
• 2006

Nucleate pool boiling experiments were performed using pure R11 for various surface angles under constant heat flux conditions during saturated pool boiling. A 1-mm-diameter circular heater with an artificial cavity in the center that was fabricated using a MEMS technique and a high-speed controller were used to maintain the constant heat flux. Bubble growth images were taken at 5000 frames per second using a high-speed CCD camera. The bubble geometry was obtained from the captured bubble images. The effects of the surface angle on the bubble growth behavior were analyzed for the initial and thermal growth regions using dimensional scales. The parameters that affected the bubble growth behavior were the bubble radius, bubble growth rate, sliding velocity, bubble shape, and advancing and receding contact angles. These phenomena require further analysis for various surface angles and the obtained constant heat flux data provide a good foundation for such future work.

• Journal of electromagnetic engineering and science
• /
• 제13권1호
• /
• pp.44-50
• /
• 2013

In this paper, we present a circularly polarized (CP) composite cavity-backed crossed dipole antenna for global positioning system (GPS) applications. We produce the CP radiation by crossing two dipoles through a $90^{\circ}$ phase delay line of a vacant-quarter printed ring, which also has a broadband impedance matching characteristic. Two techniques, insertion of meander lines in the dipole arm and arrowhead-shaped trace at its end, are employed to reduce the sizes of the primary radiation element. The compact radiator is backed by a cavity reflector to achieve a wide CP radiation beamwidth. The proposed antenna exhibits a measured bandwidth of 1.450~1.656 GHz for a voltage standing wave ratio (VSWR) < 2 and 1.555~1.605 GHz for AR < 3-dB. At 1.575 GHz, the antenna has a gain of 7 dBic, a frontto-back ratio of 27 dB, AR of 1.18 dB, and 3-dB AR beamwidths of $130^{\circ}$ and $132^{\circ}$ in the x-z and y-z planes, respectively.