• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.1
• /
• pp.23-30
• /
• 2010

In this paper, a design for the 900MHz bandwidth RFID reader antenna with circular polarization is proposed and experimentally investigated. The 900MHz bandwidth RFID reader antenna is proposed as a simple radiator with loading capacitor to generate LHCP(Left Hand Circular Polarization). Also, the design and fabrication of antenna has the returnloss of -32.28dB at the center frequency of 1010MHz and Bandwidth of 12.5% at 905Hz~1030MHz. Proposed LHCP antenna of maximum gain is 6dBi and satisfy axial ratio based on 2. From the measured result, axial ratios based on 2 are observed at the operating frequencies. The proposed antenna is suitable for RFID applications in wireless communications.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.1
• /
• pp.245-252
• /
• 2018

In this paper, the dual band circular polarization patch antenna was designed by using band rejection characteristics of CSRR structure for geostationary satellites. A quadrangular CSRR structure was etched on the ground at the rear of the patch antenna's feed to obtain band rejection characteristics in between the receiving frequency band(1525~1559MHz) and transmission band(1626.5~1660.5MHz), and the corner of the patch antenna was truncated to enable circular polarization. It was confirmed that the resonant frequency of the patch antenna differs according to the size anc location of the CSRR and cirular polarization characteristics with simulation and measurement results. Measurement results shows the gain of about 0.2dB and 1.5dB in the TX and RX band.

• ETRI Journal
• /
• v.31 no.5
• /
• pp.506-509
• /
• 2009

A novel design of a compact square-ring slot microstrip antenna for achieving circular polarization (CP) operation is proposed and experimentally studied. By using an arrow-shaped slot structure as a radiating element, the resonant frequency of the proposed antenna is significantly lowered, which can lead to a large size reduction for fixed frequency operation. The CP radiation characteristics are achieved by loading with proper asymmetry, which can be placed diagonally. A prototype of the proposed design is implemented and its performance is measured. Measured results show that radiation patterns with good CP characteristics are obtained at the resonant frequency.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.1 s.104
• /
• pp.60-66
• /
• 2006

In this paper, a circular microstrip patch antenna for switchable polarization is presented. For the switchable polarization, pairs of tuning stubs and two PIN diodes are utilized. By independently setting the PIN diodes on or off, the antenna produces either linear polarization or circular polarization. From the results, the -10 dB impedance bandwidths of 57.0 MHz($2.4\%$) and 50.0 MHz($2.1\%$) when operated in the linear polarization, and the 3 dB axial ratio bandwidth of $1.3\%$ with minimum of 0.2 and 0.9 dB in the circular polarization have been observed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.7
• /
• pp.1363-1368
• /
• 2015

Aperture-coupled circular polarization microstrip array antenna is proposed in this paper. The proposed antenna is useful for 2.4GHz ISM band and its aperture shape is a modified H-slot. The optimal design parameters for the antenna structure is found by using electromagnetic analysis tool HFSS repeatedly. The HFSS simulation results, such as return loss, axial ratio, radiation pattern and gain of the proposed array antenna are compared with results of the single antenna. It is able to verify that the proposed array antenna is valuable enough to be used in various applications as well as 2.4GHz ISM band.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.1
• /
• pp.131-137
• /
• 2023

In this paper, a phase comparison direction finding method of circular array composed of 8 antennas considering polarization characteristics is analyzed. A broadband cavity-backed patch antenna operating in 6 ~ 12 GHz is used, and the antennas are arranged in radial direction to receive various polarization signals. For the phase comparison, widely spaced elements are used to obtain precise DOA(Direction of Arrival), and narrowly spaced elements are used to resolve ambiguity. Two dimensional direction finding is performed for ±20° in both azimuth and elevation, and the DOA error is less than 0.5° and 1.6° near the boresight and the ±15° region, respectively.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.609-612
• /
• 2003

For combating multipath fading in wireless radio environment, diversity schemes is useful. In this paper, for performance improvement of polarization diversity system, we analyzed a two-branch polarization diversity at the receiving end of a mobile link when the transmitter emits a circularly polarized wave. And In order to calculate the correlation coefficient considering the XPD(cross polarization discrimination) between the received signals for the two diversity branches, a simple theoretical model of circular polarization diversity is adopted and calculate correlation coefficient. From the analysis results, it is seen that the correlation coefficient of circular polarization diversity evaluated by the XPD is less than that of vertical polarization diversity. And also, we designed and fabricated circular polarization diversity system with microstrip antenna. we analyzed data measured in indoor NLOS environment using fabricated circular polarization diversity system. From the measurement results, it is clearly seen that the diversity effect of circular polarization diversity system is higher 3dB than vertical polarization diversity system.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.7
• /
• pp.776-781
• /
• 2004

We report the performance of a four-element, 11.67 GHz, $high-{T}_c$ superconducting (HTS) microstrip antenna array with corporate feed network. The HTS antenna array used in this work had a circular polarization for direct broadcasting satellite (DBS) system. Our array antennas were designed and built on a 0.5 mm thick MgO substrate. To compare the superconducting antennas with normal conducting counterpart, One antenna pattern was fabricated from gold thin film, and a second pattern was fabricated from ${YBa}_2{Cu}_3{O}_7-x(YBCO)$ superconducting thin film. To improve the axial ratio of circularly polarized arrays, sequential rotation technique were used. Efficiency, radiation pattern, return loss and bandwidth were measured for both antennas at cryogenic temperature and room temperature. The array produced good circular polarization, and the gain of the array at 77 K, relative to a copper array at room temperature was approximately 1.54 dB. The measured return loss of our HTS antenna array was 35.79 dB at the resonant frequency of 11.67 GHz and The total effective bandwidth was about 3.4 %. The results showed that high-temperature superconductors, when used in microstrip arrays, improved the efficiency of the HTS antenna array for circularly polarization.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.369-373
• /
• 2000

This paper describes a design for microstrip EMC cross dipole array antenna with circular polarization. To realize the wide bandwidth and circular polarization, the electromagnetic-coupled cross dipole is used. To obtain the uniform aperture illumination, offset technique for array is adopted. In 20-element array design, the calculated axial ratio and gain are about 0.1 dB and 9.9 dBi at 12GHz, respectively. The frequency characteristics of a fabricated 20-element array antenna are measured. The calculated results agree well with the measured ones.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.3
• /
• pp.440-444
• /
• 2002

A microstrip patch antenna with circular polarization based on the Sierpinski fractal geometry is proposed. The Sierpinski fractal is composed of 3 equilaterial triangular patch and is easy to produce a circular polarization by sequentially rotation techniques. The characteristics of a 1x3 antenna array from Sierpinski geometry are investigated, i.e. port isolation and AR(axial Ratio).