• Journal of Korean Society of Steel Construction
• /
• v.24 no.3
• /
• pp.267-278
• /
• 2012

In general, the H-shaped steel ribs or triangular lattice girders have been mostly used in constructing tunnels through the NATM construction method. The H-shaped steel rib has higher flexural and axial strength than the triangular lattice girder, but many unexpected gaps can occur in the concrete lining system after shotcreting if the H-shaped steel rib is used as the support system. To achieve better shotcreting quality, the triangular lattice girder was developed. However, in general, the triangle lattice girder has low flexural and axial strength. Likewise, the triangular lattice girder, which has circular sectional members, has so many fractures from welded points at the joints between the members. Finally, the new type of tetragonal lattice girder was developed to overcome those problems. In this study, the structural performance of the tetragonal lattice girders was evaluated through analytical and experimental studies. In the analytical studies, the four-point bending analysis, the traditional evaluation method to determine the flexural strength of the lattice girder, was performed. Moreover, the linear-elastic analysis and stability analysis of the arch structure made by the lattice girders were performed to measure structural performance. Experiments were likewise performed to compare the structural performances of the tetragonal girder with traditional triangular lattice girders.

• Journal of Digital Contents Society
• /
• v.15 no.3
• /
• pp.327-338
• /
• 2014

This study proposes the evolution model of emerging media platform including smart media (M-IPTV, Smart TV) and IPTV, through a spiral evolution model based on the theory of the exploration & the exploitation. Authors suppose that the IP media evolved from IPTV technology, evolution of which has come through the development model of serial circular process. For explanation of this evolution, we propose the research model integrating the spiral model and the exploration & exploitation theory. Researchers define the smart media as the evolved media from IPTV, through this proposed model. We expect this model to be the theoretical base of media regulation and setting direction of future media service. Thus, this research are summed up as follows. To begin with, we classify the evolutionary stage of IPTV from the view points of service feature, regulation frame and technological characters. Secondly, we organize and confirm the research model of IPTV evolution through case analysis of the 3 cycles of each evolutionary stage. As a result, discussion of this study helps understanding mobile IP media and smart media as a post IPTV and leads the solution of various regulation issues and the development of the innovative media service and content. In addition, it can guide the government for the evolutionary direction to promote the media and the content industry.

• Journal of Society of Preventive Korean Medicine
• /
• v.21 no.2
• /
• pp.45-53
• /
• 2017

Background and Aim : Lately the age of competition has come among the medical service area. At the same time disputes over the medical practice related to the medical person's territory tend to increase. In part it is due to the increased medical persons but in part it is because the medical practice is not defined clearly in the Medical Service Act for the practice of each medical person. So the legal definition of medical practice will be discussed here. Materials and Method : The cases from the court have been confirmed the difference between the two medical persons regarding the actual events. Legal aspects of medical practice in Korean medicine and the related cases will be reviewed and analysed. Results : The form of medical practice consists of administrating Korean medicine treatment and providing guidance for health based on Korean medicine. For medical doctors the practice includes medical treatment and guidance for health. Circular definition in the Medical Service Act over the medical practice, medical person and medical instruments makes it difficult to understand the whole idea. Therefore, the court has a tendency to decide the medical practice of medical doctor of Korean medicine from the some reliable points which is: 1) it is based on the principle of traditional Korean Medicine, 2) it is practiced by the medical doctor of Korean Medicine, 3) it can do harm to the patient without proper involvement of the medical doctor of Korean Medicine. Now the Act on the promotion of Korean Medicine and Pharmaceuticals makes it include the concept of "scientifically applied and developed" medical practice of Korean Medicine. Conclusions : With the essential change in the Act on the promotion of Korean Medicine and Pharmaceuticals, it is expected that even slight change can be seen in the court cases. However, still the concept of medical practice in the Medical Service Act remains the same. Modernisation of Korean Medicine, enhancement of textbooks and clinical practice training and the effort to amend the law to clearly define the medical practice of Korean Medicine will contribute to the clinical and academic environment. Evidence based Korean Medicine and even the unification of east-west medicine could be considered for the situation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.32 no.4
• /
• pp.526-552
• /
• 1994

The extent and direction of movement of removable partial dentures during function are influenced by the nature of the supporting structures and and the design of the prosthesis. Since forces are transmitted to the abutment teeth through occlusal rests, guide planes and direct retainers during functional movements, proper design based on the avaialble research data will maintain the health of abutment teeth and their supporting structures. The purpose of this in vitro study is evaluating stress distribution clinically around the abutment teeth prepared following 4-type clasping systems for unilateral free-end removable partial dentures. Three-Dimensional Photoelastic Stress Analysis method was used because it shows a visual display of stresses of the simulated abutment teeth and residual ridges and reveals stress concentration that can be read at any given points in terms of direction and magnitude. For this study, the author fabricated 4 mandibular photoelastic epoxy models missing left 1st and End molar. Epoxy models were duplicated and 4 unilateral removable partial dentures were construe- ted in accordance with 4-type direct retainers. Unilateral free-end removable partial dentures were positioned on their own models. 6kg force was loaded on the every removable partial dentures of the epoxy model on the central fossa of mandibular left 1st molar vertically by the loading device. After the stress was frozen in a stress freezing furnace, 6 specimens of 6-mm thickness were made from every epoxy model and examined with the circular polariscope. The results were as follows : 1. Generally I-bar clasp revealed the most favorable stress distribution around the abutment teeth. 2. At the end portion of the free-end ridge, Back action clasp showed the highest stress concentration at the bucco-lingual and top portions of the residual alveolar ridge. 3. At the distal area of the abutment teeth, Akers clasp and Roach clasp showed higher stress concentration bucco-lingually and apically than the others. 4. To the abutment tooth, I-bar clasp showed the least stress distribution bucco-lingually but the others showed irregular stress distribution. 5. At the mesial area of the abutment teeth, the order of effective stress distribution was I-bar clasp, Back-action clasp, Akers clasp and Roach clasp. There was big difference of stress distribution between them. 6. At the right 2nd premolar and 1st molar, the stress concentration of Akers clasp was a little high but that of I-bar clasp was low.

• Journal of Popular Narrative
• /
• v.27 no.3
• /
• pp.151-191
• /
• 2021

This paper examines what is the content of Gusan's urban identity, represented by the film and how the contents and aspects of this city's identity interact with the structure of the films' discourse. weaves Gunsan and Seoul into continuously reorganized cities based on an interactive relation, rather than literal ones. Seoul in which the time for a film narrative is closed is converted into the starting point for tour to Gunsan. The both points in which audiences' ex post return occurs are the starting point for the time for the film discourse and the other point in which the title is suggested. The journey-type of the narrative structure in this film is a3-dimensional spiral-shaped, rather than a 2-dimensional circular regression. embodies the characteristics and the identity and apriority of two cities, based on such a spiral-shaped temporal and spatial structure. Seoul severs the relation between grand narrative/collective memory and small narrative/individual memory as an agnostic one, in other words, it is a city that cuts off cities, relations and memory and rejects the continuity of memory. On the other hand, Gunsan is a city in which both grand and small narrative and collective and individual memory coexist and both split and isolated mind are cured and mutually consoled. It describes Gunsan as the surplus space as a being for others, while expressing its identity as robust and literal thing. The film describes it as the field in which oppositional concepts such as historical interruption and continuity and spatial being for others and originality become 3-dimensional spiral ones, through the reciprocity between the narrative and the discourse structure. This paper has an implication, in that it examines how temporal and spatial relationship constituting the urban identity interacts with the structure of the film narrative.

• The Korean Journal of Zoology
• /
• v.15 no.3
• /
• pp.111-131
• /
• 1972

Fine structures of retina of an ommatidium in dragonfly, having eyes of closed rhabdom type, were studied under light and electron microscopes. The ommatidia consisted of eight retinular cells distributed in a circular pattern and the retinular layer in turn can be divided into three sublayers according to the number of cells in the retina. Each retinular cell has different starting points in the retina and the length of retinular cells is varied greatly; the length of one distal retinular cell shows one half of that of others. In the middle layer, three proximal retinular cells interconnect the adjacent two rhabdoms which are triangular in the appearence of the cross section which in turn consisted of tubular, parallel and lamellated microvilli. The rhabdom is formed by three rhabdomeres, each of which is separated by $120^{\circ}$ between them, but they can be distinguished into two parts according to electron density. Around the outer part of microvilli composing rhabdom, electron density was much less than the inner part of the structure. The microvilli of the inner part appear to be connected to the cytoplasm of retinular cells. Rough endoplsmic reticulum with enlarged cisternae runs through the vacuoles in the outer part of distal retinular cells. Abundant mitochondria concentrated in the vicinity of rhabdom are found at the central part of the retinular cells, while in the area of immediate vicinity of the rhabdom, prominent vacuoles are observed. Above the rhabdom of an ommtidium stands a crystalline cone which is consisted of four cone cells arranged radially along the axis. The crystalline cone is surrounded by cells containing pigment granules. The outermost photoreceptor element of an ommatidium is corneal lens.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.3
• /
• pp.99-106
• /
• 2024

In this paper, we design and implement the HealthSchedule app, which records exercise data based on the GPS sensor embedded in smartphones. This app utilizes the smartphone's GPS sensor to collect real-time location information of the user and displays the movement path to the designated destination. It records the user's actual path using latitude and longitude coordinates. Users register exercise activities and destination points when scheduling, and initiate the exercise. When measuring the current location, a lime green departure marker is generated, and the movement path is displayed in blue, with the destination marker and a surrounding 25-meter radius circle shown in sky blue. Using the coordinates of the starting point or the previous location and the current GPS sensor-transmitted location coordinates, it measures the distance traveled, time taken, and calculates the speed. Furthermore, it accumulates measurement data to provide information on the total distance traveled, movement path, and overall average speed. Even when reaching the destination during exercise, the movement path continues to accumulate until the completion button is clicked. The completion button is activated when the user moves into the sky blue circular area with a radius of 25 meters, centered around the initially set destination. This means that the user must reach the designated destination, and if they wish to continue exercising without clicking the completion button, they can do so. Depending on the selected exercise type, the app displays the calories burned, aiming to increase user engagement and a sense of accomplishment.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.3
• /
• pp.196-213
• /
• 2001

A split beam ultrasonic transducer operating at a frequency of 70 kHz to use in the fish sizing echo sounder was developed and the acoustic radiation characteristics were experimentally analyzed. The amplitude shading method utilizing the properties of the Chebyshev polynomials was used to obtain side lobe levels below -20 dB and to optimize the relationship between main beam width and side lobe level of the transducer, and the amplitude shading coefficient to each of the elements was achieved by changing the amplitude contribution of elements with 4 weighting transformers embodied in the planar array transducer assembly. The planar array split beam transducer assembly was composed of 36 piezoelectric ceramics (NEPEC N-21, Tokin) of rod type of 10 mm in diameter and 18.7 mm in length of 70 kHz arranged in the rectangular configuration, and the 4 electrical inputs were supplied to the beamformer. A series of impedance measurements were conducted to check the uniformity of the individual quadrants, and also in the configurations of reception and transmission, resonant frequency, and the transmitting and receiving characteristics were measured in the water tank and analyzed, respectively. The results obtained are summarized as follows : 1. Average resonant and antiresonant frequencies of electrical impedance for four quadrants of the split beam transducer in water were 69.8 kHz and 83.0 kHz, respectively. Average electrical impedance for each individual transducer quadrant was 49.2$\Omega$ at resonant frequency and 704.7$\Omega$ at antiresonant frequency. 2. The resonance peak in the transmitting voltage response (TVR) for four quadrants of the split beam transducer was observed all at 70.0 kHz and the value of TVR was all about 165.5 dB re 1 $\mu$Pa/V at 1 m at 70.0 kHz with bandwidth of 10.0 kHz between -3 dB down points. The resonance peak in the receiving sensitivity (SRT) for four combined quadrants (quad LU+LL, quad RU+RL, quad LU+RU, quad LL+RL) of the split beam transducer was observed all at 75.0 kHz and the value of SRT was all about -177.7 dB re 1 V/$\mu$Pa at 75.0 kHz with bandwidth of 10.0 kHz between -3 dB down points. The sum beam transmitting voltage response and receiving senstivity was 175.0 dB re 1$\mu$Pa/V at 1 m at 75.0 kHz with bandwidth of 10.0 kHz, respectively. 3. The sum beam of split beam transducer was approximately circular with a half beam angle of $9.0^\circ$ at -3 dB points all in both axis of the horizontal plane and the vertical plane. The first measured side lobe levels for the sum beam of split beam transducer were -19.7 dB at $22^\circ$ and -19.4 dB at $-26^\circ$ in the horizontal plane, respectively and -20.1 dB at $22^\circ$ and -22.0 dB at $-26^\circ$ in the vertical plane, respectively. 4. The developed split beam transducer was tested to estimate the angular position of the target in the beam through split beam phase measurements, and the beam pattern loss for target strength corrections was measured and analyzed.

• Journal of Korean Society of Forest Science
• /
• v.80 no.2
• /
• pp.151-161
• /
• 1991

I tried to specify the taxa of Fagaceae in Korea by the character of their pollen grains. The light microscope(LM) and the Scanning electron microscope(SEM) were used to examine the pollen grains of 19 taxa, 5 genera. The result are as follows. 1. The pollen of Fagaceae in Korea could be grouped into four types and 4 subtypes. 1) Fagus type 2) Castanea type 3) Lithocarpus, Castanopsis type 4) Quercus type (1) Cyclobalanopsis subtype (2) Prinus subtype (3) Dentatae subtype (4) Cerris subtype. 2. The morphology of the granula on the pollen of Quercus was closely related to the differantiation of the shape of the cup scales. 1) The uniformity of branching granula on the pollen grain surface corresponds to the morphological features of the concentric arrangement of cup scales. 2) The morphological features of the pollen grain surface intermingled with large or small granula, simple-granula and tuber granula which have small points of circular prominence, corresponded to those of short cup scales. 3) The morphological features of the polllen grain surface intermingled with large or small granula, simple-granula and tuber granula with an apex of amoeba type corresponded to those of Q. dentata Thunb, with thin, fine and long cup scales. 4) The morphological features of the pollen grain surface intermingled with large of small granula of with only simple-granula, corresponded to those of Q. acutissima carr. with thick, fine and long cup scales. 3. The result of cluster analysis by coding the sculpture pattern of the pollen grain surface, the existence and nonexistence of surface perforate, the grain size and granula type were coincident with the system of classification of plants and showed an intimated relationship even under th level of species.

• Journal of the Korean Geotechnical Society
• /
• v.33 no.11
• /
• pp.21-34
• /
• 2017

The ground penetrating radar (GPR) signal can be measured with different amplitudes according to the directivity, so the directivity of the antenna should be considered. The objective of this study is to investigate the directivity of antenna by analyzing the reflection characteristics of electromagnetic waves radiated from the antenna, and to evaluate effective range of angle that can inspect an abnormal area according to the directivity of antenna. For the measurement of the directivity, a circular metal bar is used as reflector and the signals are measured by changing the angle and the distance between reflector and antenna in the E- and H-plane. The boundary distance between the near field and the far field is determined by analyzing the amplitudes of reflected signals, and two points with different distances from each of near and far fields are designated to analyze radiation patterns in near and far fields. As a result of radiation pattern measurement, in the near field, minor lobes are observed at angle section at more than $50^{\circ}$ in both E- and H-plane. Therefore, antenna has the directivity for the direction of main lobe and minor lobes in near field. In the far field, antenna has the directivity for a single direction of main lobe because minor lobes are not observed. The amplitude of the signal reflected from the near field is unstable, but it can be distinguished from noise. Therefore, in the near field, the ground anomaly can be detected with high reliability. On the other hand, the amplitude of the signal reflected from the far field is stable, but it is hard to distinguish between reflected signal and noise because of the excessive loss of electromagnetic wave. The analyses of directivity in the near and the far fields performed in this study may be effectively used to improve the reliability of the analyses of abnormal area.