• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.4
• /
• pp.905-910
• /
• 2008

In this paper, a circular motion table which is able to simulate movement of object is designed and the experiment of control system using circular motion table is presented. Circular motion table is consisted of three axes changed on length and of ball splines which keep vertical centre axis of circular plate. Variable length of three axes make circular plate incline as vertical centre axis is kept on vertical center axis of circular motion table. It is designed that control system drives three servo motor, that is, make change length of axis simultaneously or independently. And this paper presents example of flight simulation using circular motion table. it will contribute toward nurture expert manpower of aerospace/robotics to popularize circular motion table and make an experiment using it.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.2
• /
• pp.54-65
• /
• 1993

The paper describes and alternative method based on a new idea to measure the circular movement of machining centers. ISO has employed three testing methods for the acceptance tests of machine tools; the first is a rotating one-dimensional probe method, the second is a two-dimensional probe and a master circular ring, and the third is a kinematic ball bar. The last two methods were proposed and introduced by W. Knapp and J. B. Bryan, respectively. The newly developed method is superior to above two methods; the rotating angle can be detected and the rotating radius is variable. Circular movement errors of machining centers were investigated by the analysis of data measured by R- .THETA. method. Followint observations are obtained 1) The errors which depend on positions, i.e., periodical errors by the pitch of ball screws, errors by compensation of backlash and errors by perpendicularity of X and Y-axis, were analyzed. 2) The errors which depend on NC control system, i.e., errors by the unbalance of position-loop-gaians, errors by velocity-loop-gains and errors by feed speeds, were quantiatively analyzed. 3) The method of extracting error information, which uses moving technique of averaging angle and fourier's analysis data mesured by the R- .THETA. method, was proposed.

• Journal of the Korean Physical Society
• /
• v.73 no.10
• /
• pp.1410-1419
• /
• 2018

A skier's motion was analyzed by a simple model consist of point mass m and a single rod connected to a single ski plate. We studied the conditions for the stable ski turn as functions of the linear velocity and the radius of the turn. The solutions for the stable ski turn in our model do not require any extra skier's movement to complete a stable circular turn. The solution may then give the skier the most comfortable skiing method without any active movement to control the ski. The generalized force supporting the point mass from the ski plate was calculated. We obtained the force from the ground (rebound force) without any geometrical structure of the ski plate. Adding an active movement to the direction of the ski plate, the conditions for the stable ski turn were also analyzed. Our result gives some insight for the skier who wants to develop technique.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.2
• /
• pp.184-189
• /
• 2004

In this paper, we realized a system that receives the dynamic images of finger languages, which is the method of intention transmission of the hearing disabled person, using the white and black CCD camera, and that recognizes the images and converts them to the editable text document. We use the afterimage to draw a sharp line between indistinct images and clear images from a series of inputted images, and get the character alphabet from the away of continuous images and output the accomplished character to the word editor by applying the automata theory. After the system removes the varied wrist part from the data of clean image, it gets the controid point of hand by the maximum circular movement method and recognizes the hand that is necessary to analyze the finger languages by applying the circular pattern vector algorithm. The system abstracts the characteristic vectors of the hand using the distance spectrum from the center of the hand and it compares the characteristic vector of inputted pattern from the standard pattern by applying the fuzzy inference and recognizes the movement of finger languages.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.12 no.4
• /
• pp.306-310
• /
• 2002

In this paper, we realized a system that converts the Korean alphabet (Hangul) images, which are in any domain that is formed by the finger movement on the Hangul document, to the editable characters and then outputs them to the word editor. The domain of hand is separated from the sphere of document in the pre-process step of image. The centroid point of hand is drawn by the maximum circular movement method. After the system recognizes the hand with the circular pattern vector algorithm, finds out the position of finger by the distance spectrum and then draws out the sphere of selected character image by the finger movement to divide the characters into character units by applying the histogram between the Hangul characters. We standardized the characters of various sizes. We used the circular pattern vector algorithm that grafts on the fuzzy inference to divert the character images of the domain, which user wants, to the editable characters by comparing the characteristic vectors between the standard pattern character and the inputted character and by recognizing the character.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.90-93
• /
• 2002

In view of reliability assessment, the failure mode analysis by performance tests for machine totals is researched in this study. First, the error analysis with circular movement test data is studied. The various errors and their origins are analyzed by error equations and related parts are investigated. Second, This paper deals with analysis of vibration testing fur machine tools spindle. The various frequency components are classified by FFT and order analysis. The simple measuring devices and error evaluation programs for tests are also developed.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.1 s.178
• /
• pp.201-208
• /
• 2006

Recently, there are many studies for the micro-machining using Piezo actuator. However, because of its step-by-step motion, it is nearly impossible to increase the machining accuracy for a circular path. To increase the accuracy, it is well known that it is necessary the finer and synchronous movement for x-y axes. Therefore, this paper proposes an adaptive control for finer movement of the actuator, and realizes a synchronous control for the x-y axes. The experimental results show that the machining accuracy is remarkably improved.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.369-374
• /
• 2004

Web-based analysis programs for reliability assessment of machine tools were developed in this study. First, the reliability data analysis program was developed to search for failure rate using failure data and reliability test data of mechanical part. Second, failure mode analysis was developed through performance tests like circular movement test vibration test for machine tools. This analysis program shows correlation between failure mode and performance test result. Third, tool life was predicted by correlation between flank wear and cutting time, using the extended Taylor tool life equation in turning data and the equivalently converted equation in order to apply ball endmill data to Taylor tool life equation in milling data. All the information related to input and result data can be stored in theses programs.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2005.05a
• /
• pp.446-452
• /
• 2005

Recently, there are many studies for the micro-machining using Piezo actuator. However, because of its step by step motion, it is nearly impossible to increase the machining accuracy for a circular path. To increase the accuracy, it is well known that it is necessary the finer and synchronous movement for x-y axes. Therefore, this paper proposes a voltage control for finer movement of the actuator, and realizes a synchronous control for the x-y axes. The experimental results show that the machining accuracy is remarkably improved.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.543-550
• /
• 2005

Recently, there are many studies for the micro-machining using Piezo actuator. However, because of its step by step motion, it is nearly impossible to increase the machining accuracy for a circular path. To increase the accuracy, it is well known that it is necessary the finer and synchronous movement for x-y axes. Therefore, this paper proposes an adaptive control for finer movement of the actuator, and realizes a synchronous control for the x-y axes. The experimental results show that the machining accuracy is remarkably improved.