• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.969-974
• /
• 2001

Circular cylindrical tubes are widely used in structures such as vehicles and aircraft structures, where light weight and high compressive/bending/torsional load carrying capacity are required. When axially compressed, relatively thick circular cylindrical tubes deform in a so-called ring mode. Each ring develops and completely collapses one by one until the entire length of the tube collapses. During the collapse process the tube absorbs a large amount of energy. Like honey-comb structures, circular cylindrical tubes are light weighted, are capable of high axial compressive load, and absorb a large amount of energy before being completely collapsed. In this report, the subject of axial plastic buckling of circular cylindrical tubes was reviewed first. Then, the axial collapse process of the tubes in a so-called ring mode was studied both experimentally and numerically. In the experiment, steel tubes were axially compressed slowly until they were completely collapsed. Fixed boundary condition was provided. Numerical study involves axisymmetric, elastic-plastic, large deflection, self-contact mechanisms. The measured and calculated results were presented and compared with each other. The purpose of the study was to evaluate the load carrying capacity and the energy absorbing capacity of the tube.

• 한국소음진동공학회논문집
• /
• 제26권2호
• /
• pp.203-209
• /
• 2016

According to the wear detection history for the steam generator tubes in the nuclear power plant, the outer tubes inside the steam generator have more problems on the flow-induced vibration than inner tubes. Many researchers and engineers have used a specified added mass coefficient for a given tube array during the design stage of the steam generator even though the coefficient is not constant for entire tube in cylindrical shell. The aim of this study is to find out the distribution of added mass coefficients for each tube along the radial location. When numbers of tubes inside a cylindrical shell are increased, values of added mass coefficients are also increased. Added mass coefficients at outer tubes are less than those of inner tubes and they are decreased with increasing the gap between the outermost tube and the cylindrical shell. It also turns out when the gap between the outermost tube and the cylindrical shell approaches infinite value, the added mass coefficient converges to an asymptotic value of given tube array in a free fluid field.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.693-699
• /
• 2011

The outermost SG tubes have more structural problems than inside tubes. Many studies have used a uniform added mass coefficient for all of the SG tubes during the FIV analysis. The purpose of this study is to find out the added mass coefficients for each tube in a cylindrical shell. When a number of tubes are increased, added mass coefficients are also increased. And added mass coefficients at outermost tubes are less than those of inside tubes. According to gap changes between outermost tube and cylindrical shell, added mass coefficients are decreased with increasing the gap. When the gap has very large value, it shows that the added mass coefficient is asymptotically converged to the value of the tube array in a free fluid field.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제20권3호
• /
• pp.149-158
• /
• 2013

In this article, we study the Gauss map of generalized slant cylindrical surfaces (GSCS's) in the 3-dimensional Euclidean space $\mathbb{E}^3$. Surfaces of revolution, cylindrical surfaces and tubes along a plane curve are special cases of GSCS's. Our main results state that the only GSCS's with Gauss map G satisfying ${\Delta}G=AG$ for some $3{\times}3$ matrix A are the planes, the spheres and the circular cylinders.

• 한국음향학회지
• /
• 제21권2호
• /
• pp.110-119
• /
• 2002

수중퇴적물의 투과음향특성을 실험실 조건에서 고찰하였다. 물로 포화된 입자지름 0.5 mm이하의 모래퇴적물을 (재질의 두께가 1 mm이고 부피가100mm×100m×42m인 아크릴상자 안에) 형성시켜 수중모래퇴적물 시료를 제작하였다. 수중 모래퇴적물 시료의 다공율을 조절할 수 있도록 퇴적물 내부에 내경 3 mm, 길이 42 mm인 원통형 관들을 이용하여 물로 채워진 관을 위치시켜서, 원통다공율이 각각 0 %, 5%, 11%, 18%, 26%인 다섯 개의 수중 모래퇴적물 시료를 만들었다. 수중 모래퇴적물 시료의 음향특성을 다공율과 0.3 MHz에서 4 MHz의 구간에서 주파수의 함수로 분석하였다. 수중 모래퇴적물 시료를 투과한 음향신호는 시료 전체로부터 나온 첫번째파 (first-kind wave)와 관을 통하여 나온 두번째파 (second-kind wave)를 구분하여 관측하였다. 중심주파수 1 MHz에서는 첫번째파가 지배적이었으나 중심주파수 2.25 MHz에서는 두번째파가 지배적이었다. 첫번째파의 경우, 다공율이 증가되면 음압투과계수는 작아지고 음속은 물의 음속에 가깝게 낮아지며, 주파수가 증가되면 투과계수는 점차 작아지나 음속의 변화는 없었다. 두번째파의 경우, 다공율이 커지면 투과계수가 커지고 음속은 변화가 없었으며, 주파수가 증가되어도 투과계수와 음속의 변화는 없었다.

• 수산해양교육연구
• /
• 제4권1호
• /
• pp.47-61
• /
• 1992

An experimental study was carried out to investigate the condensation performance for the horizontal cylindrical heat transfer tube with various fin attached using R-11 vapor. The heat transfer tube used in this study was supplied by SUNG HYUNG METAL CO., LTD. Four different types of heat transfer tubes (plain tube, SH-CYR tube, thermocor tube and thermoexcel tube) were used. Each tube was surrounded by circular acrylate tube, and R-11 gas heated by boiler flows into the acrylate tube. Cooling water counter-flows in heat transfer tubes. Heat transfer coefficient of the plain tube from measured data was compared with those of three other tubes. The results are summarized as follows: 1. As the cooling water temperature decreased, the liquid film of R-11 turned to droplet drop on the top surface of the horizontal tube. 2. Heat transfer coefficient calculated theoretically was higher than that obtained from the experimental data. 3. As far as the condensation concerns the thermocor tube is the highest, the SH-CYR tube is the second, and the thermoexcel tube is the third excluding the plain tube.

• 설비공학논문집
• /
• 제12권2호
• /
• pp.113-119
• /
• 2000

An experimental study has been carried out in order to investigate on a particle deposition on a circular cylinder surface. The present study is focused on the particulate fouling occurring in a heat exchanger for a seawater desalinization, in a laminar flow over circular cylindrical tubes. The objective is to investigate how NaCl concentration influences the $SiO2$ particle deposition on the surface of a glass circular cylinder. The NaCl concentration was changed from 0 g/L to 40 g/L. As the experimental results of $SiO2$ particle which is deposited on the glass circular cylinder surface showed, particle deposition rate per unit time increases rapidly with the increase of NaCl concentration between 0 g/L and 15 g/L. After the maximum of particle deposition rate was found at the NaCl concentration of 15 g/L, particle deposition rate remains unchanged or decreases gradually with the NaCl concentration from 15 g/L to 40 g/L. Also the $SiO2$ deposition rate of particles does not have serious variations with the position at present glass surface.

• 한국전기전자재료학회논문지
• /
• 제17권3호
• /
• pp.249-258
• /
• 2004

We investigated structural phases of potassium intercalated into carbon nanotubes using a structural optimization process applied to atomistic simulation methods. As the radius of carbon nanotubes increased, structures were found in various phases from an atomistic strand to multishell packs composed of coaxial cylindrical shells and in helical, layed, and crystalline structures. Numbers of helical atom rows composed of coaxial tubes and orthogonal vectors of a circular rolling of a triangular network could explain multishell phases of potassium in carbon nanotubes.

• Wind and Structures
• /
• 제1권1호
• /
• pp.59-66
• /
• 1998

The vibrations of bodies subjected to fluid flow can cause modifications in the flow conditions, giving rise to interaction forces that depend primarily on displacements and velocities of the body in question. In this paper the linearized equations of motion for bodies of arbitrary prismatic or cylindrical cross-section in two-dimensional cross-flow are presented, considering the three degrees of freedom of the body cross-section. By restraining the rotational motion, equations applicable to circular tubes, pipes or cables are obtained. These equations can be used to determine stability limits for such structural systems when subjected to non uniform cross-flow, or to evaluate, under the quasi static assumption, their response to vortex or turbulent excitation. As a simple illustration, the stability of a pipe subjected to a bidimensional flow in the direction normal to the pipe axis is examined. It is shown that the approach is extremely powerful, allowing the evaluation of fluid-structure interaction in unidimensional structural systems, such as straight or curved pipes, cables, etc, by means of either a combined experimental-numerical scheme or through purely numerical methods.

• 태양에너지
• /
• 제10권3호
• /
• pp.13-18
• /
• 1990

표면 온도가 균일하지 않은 원통을 균속도 유동장에 가로 놓았을 경우, 표면에서의 열전달 특성은 표면이 등온이거나 일정한 heat flux가 주어졌을 때와는 판이하게 다르다. 본 연구에서는 공기의 균속도 유동장내에서 두가지 경우(step형 및 선형변화)의 비등은 경제조건이 원통면을 따라 원주방향으로 주어졌을 때 표면에서의 열전달 특성을 고찰하였다. Step형 변화는 원통형 태양로의 표면에서 관찰될 수 있다. Solar One(Califomia주의 Barstow시에 있는 태양로)의 경우, 작동유체(물)는 표면을 따라 원주방향과 수직으로 설치된 튜브를 따라 흐르면서 액체상태로부터 고온고압의 증기로 변한다. 이 과정에서 태양로 표면의 receiver panel은 그 위치에 따라, preheater, boiler, 그리고 superheater의 역할을 수행하며 표면의 온도도 균일하지 않은 분포를 나타낸다. 이와 같은 경우 표면의 평균 온도를 가지고 대류에 의한 열 손실을 계산하면 큰 오류를 범할 가능성이 있다.