• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.305-310
• /
• 2001

This paper presents the computational method for analyzing the compressible flow fields in a high voltage gas circuit breaker. There are many difficult problems in analyzing the gas flow in GCB due to complex geometry, moving boundary, shock wave and so on. In particular, the distortion problem of the grid due to the movement of moving parts can be worked out by the fixed grid technique. Numerical simulations are based on a fully implicit finite volume method of the compressible Reynolds-averaged Navier-Stokes equations to obtain the pressure, density, and velocity through the entire interruption process. The presented method is applied to the real circuit breaker model and the pressure in front of the piston is good agreement with the experimental one.

• 유공압시스템학회논문집
• /
• 제1권3호
• /
• pp.1-6
• /
• 2004

In the last few years, a considerable number of studies have been made on On-Off solenoid for fluid control. But, only few attempts have so far been made at solenoid actuator for high-voltage circuit breaker. In case of the high-pressure and high-flow system like high-voltage circuit breaker, a big size of On/Off solenoid is necessary which size is proportional to control pressure and flow rate. So, it is non-effective in the view point of system optimization. In this paper, On/Off solenoid actuator with the farce amplifier connected to the solenoid rod was proposed to get a high mechanical force and a fast response time. The magnetic force and the mechanical stress distributions were analysed using finite element analysis. The performances of suggested solenoid actuator were evaluated through the experimental results and compared with the analysis results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1872-1874
• /
• 2001

This paper presents an implantable telemetry LC resonance-type pressure sensor to measure the cerebral ventricle pressure. The sensor consists of an inductor and a capacitor. The LC resonant circuit consists of the sensor and an external antenna coil that are coupled magnetically. The resonance frequency of the circuit decreases as the applied pressure increases the capacitance of the sensor. The sensor is designed in consideration of the biocompatibility and long lifetime for continuous monitoring of the ventricle pressure. The sensor is simple to fabricate and small in comparison with others reported previously. The inductor is fabricated by electroplating and the variable capacitor is constructed with a flexible p+ diaphragm. Also, the deflection of the diaphragm, the variation of the capacitance and the resonance frequency are analyzed and calculated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.2254-2256
• /
• 2000

This paper presents an implantable telemetry LC resonance-type pressure sensor for the measurement of the ventricle pressure. This sensor consists of a capacitor and an inductor. This resonant circuit is magnetically coupled with an external antenna coil. The resonance frequency of the circuit decreases as the sensor capacitance is increased by the applied pressure. The inductance and the capacitance are 428nH and 0.98${\mu}F$, respectively. The resonance frequency is 245.7MHz when the differential pressure is zero. The sensitivity of the sensor is 9.477kHz/Pa.

• 화약ㆍ발파
• /
• 제35권2호
• /
• pp.9-17
• /
• 2017

휘트스톤 브리지(Wheatstone bridge)는 변형률 게이지의 극도로 작은 저항 변화를 측정하는 데 널리 사용되는 중요한 전기회로의 하나이다. 변형률 게이지는 변형을 측정하고자 하는 구조물이나 시편에 부착한다. 휘트스톤 브리지는 다양한 공학재료에 대한 정적 혹은 동적 강도를 시험하는 분야에서 많이 사용되고 있다. 일례로, 스플릿 홉킨슨 압력봉(split Hopkinson pressure bar) 시스템에서 브리지 회로는 응력파가 전파되는 입사봉과 전달봉의 동적 변형률을 측정하는 데 필수적으로 사용된다. 본고에서는 암석동역학과 연관된 실험실 실험에서 쉽게 참고할 수 있도록 휘트스톤 브리지 회로의 원리를 상세히 설명하였다. 특히, 쿼터(quater), 하프(half) 및 풀(full) 브리지의 회로배열을 그 기본적인 용도와 함께 자세히 소개하였다.

• 한국화재소방학회논문지
• /
• 제17권2호
• /
• pp.1-5
• /
• 2003

현재 고감도의 누전차단기(RCD)와 배선용차단기(WCCB)및 퓨즈(Fuse)설치를 통하여 누전·단락사고와 과전류 발생시 차단기능을 부여함으로써, 전기화재의 발생을 억제하고 있으나, 매우 미흡한 실정이다. 특히 소손사고와 접속·접촉불량사고 및 순간단락사고 발생시는 구조적으로 차단이 불가능할 것으로 사료되며, 이에 대한 연구가 필요하다. 따라서 본 논문에서는 상기의 상황에 기초해서 가장 일반적으로 사용되고 있는 열동형 누전차단기(단락보호, 과부하 겸용)의 동작원리와 시험항목 및 기준분석을 통하여 문제점을 제시하고자 한다. 또한 저압 배선선로의 소손사고와 접속·접촉불량사고 및 순간단락사고 발생시 전등(R)부하 및 전동기(R-L)부하에 따른 누전차단기의 동작특성을 실제 실험을 통하여 검토하고자 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.677-678
• /
• 2006

Pressure risc is an important design factor and affects significantly on the characteristics of gas circuit breakers. For self-blast circuit breakers, the nozzle ablation plays important role in pressure-building up and should be properly considered for the accurate calculation. In this paper, the nozzle ablation is treated as a boundary condition and the pressure is calculated from mass fractions of PTFE and SF6. The amount of the ablated mass of a nozzle is assumed to be proportional to the are energy and the area of nozzle surface that directly touches arc. The calculation result is compared with measured data and shows good agreement with it.

• 대한기계학회논문집B
• /
• 제32권12호
• /
• pp.915-923
• /
• 2008

The performance experiments for a microchannel printed circuit heat exchanger (PCHE) of high-performance and high-efficiency on the two technologies of micro photo-etching and diffusion bonding were performed in this study. The microchannel PCHE were experimentally investigated for Reynolds number in ranges of 100 $\sim$ 700 under various flow conditions in the hot side and the cold side. The inlet temperatures of the hot side were conducted in range of $40^{\circ}C\;{\sim}\;50^{\circ}C$ while that of the cold-side were fixed at $20^{\circ}C$. In the flow pattern, the counter flow was provided 6.8% and 10 $\sim$ 15% higher average heat transfer rate and heat transfer performance than the parallel flow, respectively. The average heat transfer rate, heat transfer performance and pressure drop increases with increasing Reynolds number in all the experiment. The increasing of inlet temperature in the experiment range has not an effect on the heat transfer performance while the pressure drop decrease slightly with that of inlet temperature. The experimental correlations to the heat transfer coefficient and pressure drop factor as a function of the Reynolds number have been suggested for the microchannel PCHE.

• 전력전자학회논문지
• /
• 제27권5호
• /
• pp.376-383
• /
• 2022

The improved performance of computer parts, such as graphic card, CPU, and main board, has led to the need for power supplies with a high power output. The dynamic load profile rapidly changes the usage of power consumption depending on load operations, such as PC power and air conditioner. Under dynamic load profile conditions, power consumption can be classified into maximum, normal, and standby power. Several problems arise in the case of maximum power. Peak power is generated at the system power source in the maximum-power situation. Frequent generation of peak power can cause high-frequency problems and reduce the life of high-pressure parts (especially high-pressure capacitors). For example, when a plurality of PCs are used, system overload occurs due to peak power generation and causes problems, such as power failure and increase in electricity bills due to exceeded contract power. To solve this problem, a system peak power limit/compensation power circuit is proposed for a power supply under dynamic load profile conditions. The proposed circuit detects the system current to determine the power situation of the load. When the system current is higher than the set level, the circuit recognizes that the system current generates peak power and compensates for the load power through a converter using a super capacitor as the power source. Thus, the peak power of loads with a dynamic load profile is limited and compensated for, and problems, such as high-frequency issues, are solved. In addition, the life of high-pressure parts is increased.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1226-1229
• /
• 2008

In this paper, we designed sandwich type pressure regulator for air pressure control system. As a result of research, we obtained several important conclusions. First, we decided theory of poppet valve and relief valve which are used in sandwich type pressure regulator, and then designed prototype of pressure regulator. Second, we organized circuit diagram of dual pressure regulator of air pressure control system.