• 조명전기설비학회논문지
• /
• 제16권1호
• /
• pp.50-57
• /
• 2002

전력시스템의 정밀 해석을 위해서는 부하모델이 정확하게 표현되어야 하는데, 이러한 부하 중에서 유도전동기 는 가정용, 상업용 및 산업용의 전 분야에서 가장 큰 비중을 차지하는 부하이다. 본 논문은 부하로서의 유도전동기에 대하여 복잡하고 어려운 시뮬레이션의 해법을 해결하고자 하는 노력으로서, 일반적으로 알려져 있는 유도 전동기의 정태 등가회로를 이용하여 정태특성을 시뮬레이션하는 새로운 부하 모델을 제안하고, 파라미터를 알고 있는 유도전동기의 특성실험을 수행하였으며, 이 실험으로부터 얻어진 데이터를 제안된 정태 등가회로 해석에 의한 유도전동기의 부하모델 알고리즘에 적용하는 사례연구를 통하여 제안한 정태회로 해석에 의한 유도전동기 부하 모델의 효용성을 평가하였다.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2001년도 추계 기술심포지움
• /
• pp.61-66
• /
• 2001

In this research, the design parameters of embedded capacitors are extracted by modeling and fabrication. The traditional library of capactor has a few problems in applying the circuit. Its capacitance is discrete, so target values in any circuit often can't be obtained in library, To solve this problem, the characteristics of capacitors are detected in the variation with the shape and structure, and then the capacitors with the expected reactance value at target frequency are obtained, In this procedure, 3-dimensional structure simulation is performed to predict the characteiristics of capacitors.

• Journal of Power Electronics
• /
• 제8권3호
• /
• pp.239-247
• /
• 2008

This paper presents the design of 1 kW prototype high frequency link boost half bridge inverter-fed DC-DC power converters with bridge voltage-doublers suitable for small scale PEM fuel cell systems and associated control schemes. The operation principle of this converter is described using fuel cell modeling and some operating waveforms. The switching mode equivalent circuits are based on simulation results and a detailed circuit operation analysis at soft-switching conditions.

• 한국산학기술학회논문지
• /
• 제7권3호
• /
• pp.350-357
• /
• 2006

본 논문에서는 압전 변압기와 CCFL의 전기적 등가회로에 의한 PSPICE 모델을 제시하였다. CCFL 모델은 최소 제곱근을 이용하여 모델의 파라미터들을 유도하였으며, 푸시풀 인버터로 구동되는 압전 변압기 및 CCFL을 PSPICE로 시뮬레이션하여 모델들을 해석하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(5)
• /
• pp.9-12
• /
• 2000

This paper describes the modeling and experimental results of coreless printed circuit board (PCB) based transformer that can be used for power conversion at high frequency operation. The principle of using coreless PCB based transformer in 2MHz, 10W class ZVS Flyback DC-DC converter has been successfully demonstrated. The maximum power conversion efficiency is 79%. Even for high operating frequency, an efficiency greater than 70% can be obtained with under 1% regulation error.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.601-602
• /
• 2015

Interruption of AC is easier due to natural occuring of zero crossings. In DC, zero crossings is achieved by Forced commutation technique. In this paper an alternative counter voltage(ACV) DC Hybrid Circuit breaker(DC-HCB) is modeled using EMTP/ATP tool, Results show that, ACV DC-HCB can interrupt DC with in 5ms with a source voltage of upto 1 KV.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 추계종합학술대회
• /
• pp.389-393
• /
• 2003

This paper presents circuit modeling and characterization of silicon-based on-chip integrated inductors in Giga Hertz range for wireless communication products. We compare several different designs of on-chip inductors for self-resonant frequency and quality factor. The measurement data could be used as a design guide for manufacturing practical spiral inductors for wireless applications. We provide the equivalent inductor circuit parameters from the actual measurement data.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 전력전자학술대회 논문집
• /
• pp.221-224
• /
• 1998

A PWM inverter with an induction motor often has a problem with a high-frequency leakage current that flows through the distributed electrostatic capacitance from the motor windings to ground. This paper presents an equivalent circuit for high-frequency leakage currents in PWM inverter feeding an induction motor, which forms an LCR series resonant circuit.

• 대한전기학회논문지
• /
• 제40권5호
• /
• pp.531-539
• /
• 1991

We develop an analytical model of the static and the dynamic characteristics of amorphous silicon thin film transistors (a-Si TFTs) in order to incorporate into a widely used circuit simulator such as SPICE. The critical parameters considered in our analytical model of a-Si TFT are the power factor (XN) of saturation source-drain current and the effective channel length (L') at saturation region. The power factor, XN must not always obey so-called

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제10권2호
• /
• pp.160-164
• /
• 2010

The radio frequency (RF) model of SOI FinFETs with gate length of 40 nm is verified by using a 3-dimensional (3-D) device simulator. This paper shows the equivalent circuit model which can be used in the circuit analysis simulator. The RMS modeling error of Y-parameter was calculated to be only 0.3 %.