• Journal of Korea Society of Industrial Information Systems
• /
• v.6 no.3
• /
• pp.123-127
• /
• 2001

The prediction method of the parameter C/sub gs/ of CMOS transistor is proposed by calculating the mobil charge in inversion layer of COMS transistor. This parameter C/sub gs/ decided on the cutoff frequency in MOS transistor in RF range and coupled input and output. This parameter C/sub gs/ in RF range is very important parameter in small signal circuit model. This proposed method is contributed to developing software of extracting parameter value in equivalent circuit model. The method provide the important information to construct a RF nonlinear model for multifinger gate MOSFET. This method will be very valuable to develop a large signal MOSFET model for nonlinear RF IC design.

• Journal of Biomedical Engineering Research
• /
• v.2 no.1
• /
• pp.31-38
• /
• 1981

The objective of the present study was to develop an equivalent circuit model of glucose kinetics including the hepatic glucose balance functions which were neglected in the previous compartmental models. Using this circuit model, the insulin resistivity parameter and hepatic glucose sensitivity parameter were estimated in optimal fitting of the model based data of glucose and insulin concentration to the reported clinical intravenous glucose tolerance test(IVGTT) data in normal and diabetic subjects. The addition of the hepatic function in the model has improved the overall performance of the simulation. Also, the computed tissue insulin resistivity and the hepatic glucose sensitivity are shown to be significant in distinguishin four clinical groups of normal and diabetic groups.

• Proceedings of the KIEE Conference
• /
• 1999.11c
• /
• pp.570-572
• /
• 1999

An equivalent circuit model of vehicle charging-discharging system for simulation is developed. The vehicle electric power system consists of alternator and battery. The alternator must have adequate capacity for providing electric energy to all loads, and the battery supports the alternator by offering insufficient energy when the alternator output energy is not enough. The alternator model is simplified for the use of characteristic curve, which was provided by its manufacturer, and the battery model is separated in charging mode and discharging mode because of its complex characteristics. Developed circuit model is validated by comparing the simulation data and real experimental data.

• Transactions on Electrical and Electronic Materials
• /
• v.4 no.3
• /
• pp.5-9
• /
• 2003

In this paper, a layout-based CMOS RF model for RFIC's including the capacitance effect, the skin effect, and the proximity effect between metal lines on the Si surface is proposed for the first time for accurately predicting the RF behavior of CMOS devices. With these RF effects, the RF equivalent circuit model based on the layout of the multi-finger gate transistor is presented. The capacitances between metal lines on the Si surface are modeled with the layout. And the skin effect is modeled to the equivalent ladder circuit of metal line. The proximity effect is modeled by adding the mutual inductance between cross-coupled inductances in the ladder circuit representation. Compared to the BSIM 3v3 and other models, the proposed RF model shows better agreements with the measured data and shows well the frequency dependent behavior of devices in GHz ranges.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.10
• /
• pp.163-170
• /
• 2002

The dynamic model of a high-speed vacuum circuit breaker mechanism with spring-actuated cam and linkage is derived to simulate the high-speed closing and opening operations. Its validation for an analysis of high-speed motion behavior is checked through experiments. The characteristics of the friction on the camshaft are investigated using the nonlinear pendulum experiment. The parameters of the friction model are estimated using the optimization technique. The analysis exhibits that the friction of the pendulum depends on stick-slip, Stribeck effect and viscous damping. Comparing simulation results with actual responses using a high-speed camera, the appropriateness of derived dynamic models for the rapid closing and opening operations is shown. The spring motion, which has much influence on the closing responses, is observed.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.10
• /
• pp.983-992
• /
• 2007

It was proposed to identify Thiele Small Parameters for loudspeaker attached to closed-box using known dynamic mass of moving parts. Also, enhanced PSPICE circuit model for closed-box loudspeaker system was proposed to more accurately simulate real closed-box loudspeaker system. Frequency dependent parameters were used to model voice coil inductor. Acoustic pressure response curves and electrical impedance curves were simulated and investigated by PSPICE circuit model according to compensation filter's parameters. Finally, proposed method is expected to be utilized for identification of pseudo Thiele Small parameters of microspeaker.

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.141-143
• /
• 1998

A new small-signal model for the controlled on-time boost Power factor correction (PFC) circuit is Presented. The proposed small-signal model is valid up to high frequencies ever 1kHz. IF to remove the low-frequency ripple from the output a 120Hz notch filter is used the proposed model can be used for the control design of the PFC circuit to improve the dynamics of the output voltage. The accuracy of the model is confirmed by comparing the experimental results with the simulational result.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.357-360
• /
• 2000

This paper describes a parameter extraction method for HBT(Heterojunction Bipolar Transistor) equivalent circuit model without measurements of special test structures or numerical optimizations. Instead, all equivalent circuit parameters are calculated analytically from small-signal S-parameters measured under different bias conditions. These values being extracted from the cutoff mode can be used to extract intrinsic parameters at the active mode. This method yields a deviation of about 1.3 % between the measured and modeled S-parameters.

• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.1
• /
• pp.71-81
• /
• 1997

This paper describes an implementation of Chua's oscillator circuits with five - segment piecewise -linear function. Some bifurcation phenomena and chaotic attractors observed experimentally from the laboratory model and simulated by computer for the model are also presented. The Chua's oscillator circuit is implemented with analog electronic devices. Com¬paring both the observations and simulations, the spectrums are satisfactory.

• Proceedings of the IEEK Conference
• /
• 2001.06b
• /
• pp.133-136
• /
• 2001

A new package design method to reduce resonance effect due to an IC package is represented. Frequency-variant circuit model of the power/ground plane was developed to accurately reflect the resonance. The circuit model is benchmarked with a full wave simulation, thereby verifying its accuracy. Then it was shown that the proposed technique can efficiently reduce the resonance due to the IC package.