• 대한인간공학회지
• /
• 제33권6호
• /
• pp.499-513
• /
• 2014

Objective: The objective of this study was to examine frame ratio of text information and font size in the circle smartwatch. Background: Recently, electronic manufacturers try to develop the original metaphor of traditional wrist watch (circle) in terms of smartwatch. They endeavor to break the square display in order to improve emotional customer satisfaction. Method: The experiments examined twenty level of text information design, combinations of four frame ratios (1:1, 4:3, 16:9, 21:9) and five font sizes (6pt, 7pt, 8pt, 9pt, 10pt). Nineteen participants volunteered for the experiment. Dependent variables were WPM (Words per Minute), reading preference, design preference and total preference. Furthermore, small circle display was made by using circle display data (1.3inch), which was exhibited in IFA (International Funkausstellung) 2014. Results: As a result, ANOVA (Analysis of Variance) revealed that WPM, and task time preference affect the specific frame ratio and font size. Results of ANOVA for reading preference, design preference, total preference were grouped by post-analysis LSD (Least Significant Difference). Among users, display ratio (16:9, 21:9), and font size (9pt) were preferred. In conclusion, 16:9 display ratio and 9pt are adaptable for text information in 1.3inch circle display. Conclusion: From the study, it is shown that 16:9 display ratio and 9pt size are more adaptable for text information in 1.3inch circle display than others. It is mainly due to the fact that the order of frame ratio and font size may affect the usability of reading long text information in a small circle display. Therefore, when developers design a circle display, the square frame ratio and font size are required to be considered according to circle size. Application: The 16:9 display ratio and 9pt font size may be utilized as a text information frame in the circle display design guideline for smartwatch.

• Current Optics and Photonics
• /
• 제5권6호
• /
• pp.660-671
• /
• 2021

We present a novel optical system for an augmented reality head-up display (AR HUD) with two virtual images at different conjugates by employing a confocal off-axis two-mirror and introducing the horopter circle. For a far virtual image with large asymmetrical aberrations, we initially obtain an off-axis two-mirror system corrected for these aberrations and compensated for the down angle by configuring its parameters to satisfy the confocal and Scheimpflug conditions, respectively. In addition, this system is designed to reduce the biocular parallax by matching Petzval surface into the longitudinal horopter circle in a near virtual image. This design approach enables us to easily balance the residual aberrations and biocular parallax when configuring the optical system with two different conjugates, which results in an AR HUD available for near and far virtual images together.

• 반도체디스플레이기술학회지
• /
• 제9권1호
• /
• pp.11-16
• /
• 2010

Wafer Pre-Alignment is to find the center and the orientation of a wafer and to move the wafer to the desired position and orientation. In this paper, an area camera based pre-aligning method is presented that captures 8 wafer images regularly during 360 degrees rotation. From the images, wafer edge positions are extracted and used to estimate the wafer's center and orientation using least squares circle fitting. These data are utilized for the proper alignment of the wafer. For accurate alignments, camera calibration methods using high order polynomials are used for converting pixel coordinates into real-world coordinates. A complete pre-alignment system was constructed using mechanical and optical components and tested. Experimental results show that alignment of wafer center and orientation can be done with the standard deviation of 0.002 mm and 0.028 degree, respectively.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.220-226
• /
• 1996

This paper describes the force display system which presents feel information to the operator through manipulating a virtual tool with a master arm in the simulated environment. The movement of a tool grasped by the operator, which is modeled as a circle or a square is displayed in the graphic screen of a computer. When the tool contacts with the virtual environment, the operator is forced to feel contact and the feature of the virtual environment through torque control of the master arm. Contact situations are modeled as close as to the reality considering the friction, and multiple contacts. Several experients are conducted and the effectiveness of the developed system is confirmed.

• Journal of Korean Neurosurgical Society
• /
• 제29권3호
• /
• pp.345-352
• /
• 2000

Objective : The purpose of this study was to compare computed tomographic angiography(CTA) with conventional cerebral angiography(CCA) and to assess usefulness of CTA in detection and anatomic definition of intracranial aneurysms of the circle of Willis in subarachnoid hemorrhage. Patients and Methods : Fifty consecutive patients with known or suspected intracranial saccular aneurysms underwent CTA with preoperative CCA from 1997 to 1999. Using surface shaded display post-processing technique, CTA was interpreted for the presence, location of aneurysms and anatomic features. The image obtained with CTA was then compared with CCA image. Results : In 47 patients, CCA revealed 57 cerebral aneurysms and CTA revealed 54 aneurysms. Two of the 57 cerebral aneurysms were located outside of the imaging volume of CTA and one case was misdiagnosed. The sensitivity of CTA was 94.7% and the specificity was 100%. The results obtained with CTA were, compared with the results obtained with CCA, equal in determining dome shape, direction and lobularity. However, CTA provided a 3-dimensional representation of aneurysmal lesion very useful for surgical planning. Moreover, CTA was useful for rapid and relatively noninvasive detection of aneurysms in the circle of Willis. Conclusion : CTA can be a diagnostic tool for the patients with acute subarachnoid hemorrhage due to a ruptured aneurysm of the circle of Willis and provides adequate anatomic detail for surgical planning, especially to complex cerebral aneurysms. However, we think CCA is necessary because of CTA limitations including its difficulty in detecting unusually located aneurysms(including those in cavernous sinus or distal artery) and combined vascular lesion (including arteriovenous malformation) and acquiring dynamic flow information.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1989년도 제4회 파동 및 레이저 학술발표회 4th Conference on Waves and lasers 논문집 - 한국광학회
• /
• pp.113-118
• /
• 1989

By using the single mode optical fiber, we fabricated Fiber-optic Fabry-Perot interferometer (FFPI). The change over a wide range in the optical path length of a FFPI is observed. The temporal movement of the interference fringes by external condition to P.Z. T) is converted to circular motion on an oscilloscope display and then recorded with a micro-computer. The two output voltages of the D/A converters are applied to X and Y terminals of oscilloscope to display circular motion on oscilloscope. Thus the direction of phase shift can be determined with observing the direction of circular motion. The variation of the optical length can be measured by calculating the angle of spot of circle with an accuracy of λ/90 wave length due to variation of temperature in this system 2.7x10-4$^{\circ}C$.

• 반도체디스플레이기술학회지
• /
• 제20권4호
• /
• pp.167-170
• /
• 2021

Integrated passive device (IPD) technology has emerged with the need for 5G. In order to integrate and miniaturize capacitors inside IPD, various studies are actively performed using high-k materials and trench structures. In this paper, an EM(Electromagnetic) simulation study was performed by applying an oxide dielectric to the capacitors having a various trench type structures. Commercially available materials HfO₂, Al₂O₃, and Ta₂O₅ are applied to non, circle, trefoil, and quatrefoil type trench structures to confirm changes in each material or structure. As a result, the bigger the capacitor area and the higher dielectric constant of the oxide dielectric, the insertion loss tended to decrease.

• 재활복지공학회논문지
• /
• 제5권1호
• /
• pp.87-93
• /
• 2011

본 논문에서는 EOG(Electrooculography) 신호를 이용하여 디스플레이상 응시하는 좌표를 산출 하는 방법을 제안하였다. 선형적인 특성을 가지는 EOG 신호를 기반으로 하여, 디스플레이와 EOG 신호의 2차원 좌표계 사이에 존재하는 회전, 스케일링, 원점의 차이를 머리의 움직임 대신에 보정 작업으로 일치시켰다. 1680*1050 해상도를 가지는 모니터에서 출력한 원의 좌표와 이를 응시 할 때 발생되는 EOG 신호에 보정 방법을 적용하여 산출된 좌표와의 비교로 성능을 평가하였다. 실험 결과에서 x, y좌표는 평균적으로 각각 56픽셀(3%), 47픽셀(4%)의 오차를 보여주고 있다. 이 연구는 전신 마비 환자를 위한 포인팅 장치나 가상현실 게임과 같은 애플리케이션을 위한 HCI(Human Computer Interface)로 활용이 가능하다.

• 한국안전학회지
• /
• 제28권3호
• /
• pp.114-117
• /
• 2013

The purpose of this study is to empirically investigate accuracy of paper-pencil test used in surveying control-display stereotype. For doing this, three paper-pencil tests dealing with stereotype for control-burner relationship of four-stove gas range, in which three different gas range images were provided, were performed and the results were compared with those of existing studies. The result of the paper-pencil test using simple image composed of line and circle was different from that of the real model simulation, while the results of the other two tests and a previous study providing more realistic images were the same as that of the real model simulation. Furthermore, the proportion of responses coinciding with the real model simulation increased as images used became closer to real range. It is concluded that the paper-pencil tests well designed using realistic images may produce the same stereotype as the real model simulation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.69-72
• /
• 2007

Cellulose is a beneficial material that has low cost, lightweight, high compatibility and biodegradability. Recently electroactive paper (EAPap) on cellulose base was discovered as a smart material and actuator through ion migration and piezoelectric effect. Furthermore cellulose has a potentiality to apply the display material, because of its high reflectivity, flexibility and high transmittance. The various shapes and height patterns of the Cellulose acetate (CA) solution, such as circle and honeycomb patterns, were fabricated and observed by field emission scanning electron microscope (FESEM, S4300 Hitachi). The resulting pattern showed uniform size in the large area without defect. After stretching the CA film with saponification process in the sodium methoxide in methanol solution, Most of the compositions become one directional ordered nanofibers below 50nm.