• Korean Journal of Plant Resources
• /
• v.10 no.2
• /
• pp.140-144
• /
• 1997

This experiment was carried out to investigate the proper planting method of Rehmannia glutinasa Liboschitz. A Chungbuk local cultivar was sown on the seed bed of 200cm with the planting density of 30cm(6 rows) $\times$ 8.5cm(30 rhizome per $\textrm{m}^2$). The experimental design was randomized block design with 3 replications. And the result was summarized as follows. The emergence date of level Planting(control : 0$^{\circ}$) was May 23, but the emergence dates of Oblique planting(45$^{\circ}$) and Upright planting(90$^{\circ}$) treatments were later than the control by 2~4 days. And the leaf length and the ratio of leaf length/leaf width were not significantly different. As compared with the 29.2cm and 10.0mm of the rhizome length and the rhizome diameter of level planting treatment, the rhizome length of Oblique planting treatment was decreased by 3.4cm and 0 mm. The length and diameter of rhizome of the Upright planting treatment was decreased by 2.8cm and 1.0mm. And the order of sugar content was level Planting > Oblique planting > Upright planting. The total yields were decreased by 9% in the Oblique planting and by 15% in the Upright planting compared to 1,203kg/10a in the control, and the commercial yields showed the same tendency. The level planting treatment was found to be most proper for sowing of Rehmannia glutinasa Liboschitz in the middle inland region of Korea.

• Korean Journal of Plant Resources
• /
• v.9 no.1
• /
• pp.23-29
• /
• 1996

Chungbuk native Polygnatum stenophyllum Max. for used in this experiment were regional groups that collected at Cheongju and Jecheon, and then classified by seed tuber weights as 15, 30, 45, 60g. Shoot emergency time was faster about $4\sim7$days in Chengju regional group than that of Jecheon. In different seed tuber weights, shoot emergency time was the faster, seed tuber weight was the heavier. All of growth factors such as plant height, stem length and leaf length were worse Cheongju regional group in compared with that of Jecheon but leaf width was not different. Yields per 10a in both of Cheongju and Jechon were 1,600kg. After due consideration to seed tuver cost, approximately 40g is regarded as the most suitable weight for cultivation of Polygnatum stenophyllum Max.

• Korean Journal of Plant Taxonomy
• /
• v.32 no.4
• /
• pp.467-480
• /
• 2002

The development of the female gametophyte of Corydalis albipetala, C. ambigua, C. filistipes, C. nobilis, C. solida, C. ophiocarpa have been comparatively investigated using laser scanning confocal microscope (LSCM) and light microscope. An archesporium was originated from one of the outmost parietal cells beneath the one-layered epidermis of protuberant nucellus, and acted directly as a megaspore mother cell (MMC). These species had linear tetrads after successional meiotic division during the megasprogenesis. A functional megasprore developed from one of the tetrad in the chalazal end, and the rest three being degenerated. The developmental type of the female gametophyte was monosporic in accordance with the Polygonum type. Prior to anthesis the female gametophyte was organized. So mature embryo sac was comprised a three-celled egg apparatus, three large antipodals were developed from the apex of each antipodal cell, and extended toward micropylar end to be contacted with egg apparatus. Two synergids were usually observed as degenerated condition, and in this time the apices of antipodal haustoria were connected with the degenerated synergids. The developmental characteristics of seven-nucleate female gametophytes were common in all the species investigated. But the shape of mature embryo sac was ovoidal in C. albipetala, C. filistipes, C. ophiocarpa and C. solida, reflexed in C. ambigua, and rather flattened ovoidal in C. nobilis. Also, the type of megasporangium was anatropous in all the species except C. ambigua with campylotropous ovule.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.46 no.3
• /
• pp.231-241
• /
• 2020

In this study in order to develop new approaches we investigated using high voltage pulsed electric fields (PEF) technology to reduce the risks, protect the phyto-constituents and improve skin biological activities. After preparing a Chaga mushroom (Inonotus obliquus) extracts pretreated with PEF, components measurement and skin efficacy evaluation were performed. As a result of the content measurement, the content of polysaccharide and polyphenol were higher in the order of extracts treated with 50 Hz and 25 Hz at 0.5 kV/cm, and the content of protein was the highest in extracts treated with 25 Hz at 0.5k V/cm. Similar to the results of the polyphenol measurements, extracts treated with 25 Hz and 50 Hz at 0.5 kV/cm showed leading DPPH scavenging ability. The cell protection effect against sodium dodecyl sulfate (SDS) and UVB was finest in extracts treated with 25 Hz at 0.5 kV/cm, which had the highest protein content. And the hyaluronic acid synthesis was leading in extracts treated with 50 Hz and 100 Hz at 0.5 kV/cm. Therefore, the active ingredient of the high-voltage PEF pre-treatment Chaga mushroom extract can be developed as a functional material with cell protection and moisturizing effect, and such green technology is expected to be used in various fields of cosmetics and material development.

• Journal of Convergence for Information Technology
• /
• v.10 no.5
• /
• pp.117-125
• /
• 2020

Our study identifies a cost and a benefit incurred in implementing an investment project to offer new public services by use of food waste disposers and direct input of feces in sewers. This is done with identifying costs of each processing division and benefits of the project by objective statistical data and engineering perspective. In summary, cost items identified are as follows: there are house laterals, removal of septic tanks, etc. for sewer pipes system. As to water quality conservation, cost incurs in storm water outfalls and divert chambers, sewage storage tanks, equipment to treat sewer overflows, and so on. With respect to sewage treatment plants(STPs), there are so many items as increase of contaminant loads in influent of STPs, and other items. There are benefit items in health improvement due to odor mitigation, increase of energy productivity, saving cost of food waste treatment and cleaning septic tanks, etc. These estimates will be used as a basic data for its economic effect.

• Journal of Convergence for Information Technology
• /
• v.10 no.6
• /
• pp.183-192
• /
• 2020

The purpose of this study was to identify the relationship between dental hygiene students' emotional intelligence, interpersonal competence, and major satisfaction, as a preliminary professional dental hygienist who can provide effective dental hygiene college life and high-quality dental medical services. Attempts were made to find ways to promote it. To collect data, a self-administered questionnaire was developed using a convenient sample method, and the questionnaire survey was conducted on dental hygiene students in Daejeon, Cheongju and Gunsan from April 8, 2019 to April 26, 2019. As a result, it was found that emotional intelligence and interpersonal competence were positively correlated, and there were positive correlation with major satisfaction, and interpersonal competence and major satisfaction were positively correlated. Emotional intelligence, interpersonal competence, and clinical practice satisfaction were the factors that influenced major satisfaction. These results indicate that individually customized counseling and educational approach are required and there is the necessity of utilizing multidimensional improvement strategy that integrate emotional intelligence and interpersonal ability training program.

• The Journal of the Petrological Society of Korea
• /
• v.21 no.1
• /
• pp.31-45
• /
• 2012

We investigated the various lithologies and zircon U-Pb ages of metasedimentary rocks from the Yeongheung-Seonjae-Daebu Islands, western Gyeonggi Massif, whose geologic and geochronologic features are poorly constrained in spite of their significance for tectonic interpretation. Major lithology consists of quartzites or meta-sandstones commonly alternating with semi-pelitic schists, together with lesser amounts of calcareous sandstones with matrix-supported quartzite clasts, calcareous schists, and pelitic schists. Pelitic schists uncommonly contain large porphyroblasts of garnet as well as quartz veins with large crystals of muscovite and andalusite or kyanite. SHRIMP U-Pb ages of detrital zircons from two analyzed metasandstones define four age populations: Neoarchean (~2.5 Ga), Paleoproterozoic (~2.0-1.5 Ga), Neoproterozoic (~1.1-0.7 Ga), and Early Paleozoic (~560-400 Ma). The youngest zircon ages are clustered at ~420 Ma. These results suggest that the deposition of meta-sandstones took place after the Silurian, possibly during the Devonian, and are analogous to those of the Taean Formation reported from the western part of the Gyeonggi Massif. Moreover, The age distribution patterns of detrital zircons and the Barrovian-type metamorphic facies of pelitic schists are similar to those reported from the Imjingang belt, suggesting that the Taean Formation likely corresponds to southwestward extension of the Imjingang Belt.

• The Journal of the Petrological Society of Korea
• /
• v.27 no.2
• /
• pp.97-104
• /
• 2018

The U-Pb isotopic and rare earth element compositions of zircon were measured using a SHRIMP from a tonalitic gneiss sample DE43 in Daeijak Island, central Korea. Zircon crystals, up to ${\sim}300{\mu}m$ in diameter, rarely contain thin overgrowth rims. In contrast to Paleoproterozoic cores, the $^{206}Pb/^{238}U$ ages of $256{\pm}23Ma(1{\sigma})$, and $221{\pm}7Ma(1{\sigma})$ were yielded from two spot analyses on the overgrowth rims of zircon. The rims are geochemically characterized by low Th/U ratios (<0.01) and strongly depleted light rare earth elements. The Permian-Triassic apparent ages of zircon are consistent with the $^{208}Pb/^{232}Th$ ages dated from allanite ($227{\pm}7Ma(t{\sigma})$) in the same sample within uncertainties, indicating an equilibrium growth of allanite and zircon at ~227 Ma. On the other hand, the younger $^{208}Pb/^{232}Th$ and $^{206}Pb/^{238}U$ ages ($213{\pm}4Ma(t{\sigma})$ and $186{\pm}9Ma(t{\sigma})$, respectively) of allanite may result from Pb loss due to the infiltration of alkali fluids from Late Triassic and Jurassic granitoids nearby.

• Korean Journal of Optics and Photonics
• /
• v.20 no.2
• /
• pp.94-101
• /
• 2009

A novel method for the reconstruction of 3D shape and texture from elemental images has been proposed. Using this method, we can estimate a full 3D polygonal model of objects with seamless triangulation. But in the triangulation process, all the objects are stitched. This generates phantom surfaces that bridge depth discontinuities between different objects. To solve this problem we need to connect points only within a single object. We adopt a segmentation process to this end. The entire process of the proposed method is as follows. First, the central pixel of each elemental image is computed to extract spatial position of objects by correspondence analysis. Second, the object points of central pixels from neighboring elemental images are projected onto a specific elemental image. Then, the center sub-image is segmented and each object is labeled. We used the normalized cut algorithm for segmentation of the center sub-image. To enhance the speed of segmentation we applied the watershed algorithm before the normalized cut. Using the segmentation results, the subdivision process is applied to pixels only within the same objects. The refined grid is filtered with median and Gaussian filters to improve reconstruction quality. Finally, each vertex is connected and an object-based triangular mesh is formed. We conducted experiments using real objects and verified our proposed method.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.172-172
• /
• 2017

Pollen germination and its' viability in bellflower hybrid system are of great importance. The present study was conducted to investigate the several factors underlying the pollen germination of Platycodon grandiflorum and obtain the basic data for effective artificial pollination for the production of sound specifies. The pollens of Platycodon grandiflorum started germination from one hour after planting, and the germination was actively progressed as time dependent manner. For lighting conditions, the germination of pollens under the light was faster by more than twice than that without the light. Furthermore, the germination was better in the high temperature rather than in the low temperature. The germination rate was higher in the $30^{\circ}C$. For the carbon source, the germination rate was better at the concentration of 15% regardless of the kinds. In particular, the highest value was observed with glucose. The germination rate was decreased substantially as the increasing with the higher pH. The dynamic germination of pollens was observed at the pH 5. With respect to the growth regulator, the higher concentration of NAA induced the higher the germination rate. $GA_3$ showed a good germination rate in $0.05mg{\cdot}L^{-1}$. Meanwhile, for kinetin, lower concentration increased the germination rate, unlike NAA. The higher concentrations of boric acid degraded the germination rate, and the addition of boric acid of $10mg{\cdot}L^{-1}$ demonstrated higher germination rate than the addition of other growth regulators. Notably, the addition of asparaginic acid exhibited the similar results in all test sectors regardless of concentration, whereas a little higher result was observed in the high concentration sector. Taken together, the results concluded that the boric acid was considered as one of the essential minerals that played an important role on the germination of pollens.