• 콘크리트학회논문집
• /
• 제17권6호
• /
• pp.871-878
• /
• 2005

화재에 노출된 철근콘크리트 기둥은 기둥을 구성하는 재료물성의 변화와 함께 기둥의 구조적 성능에도 결과적으로 열화현상을 나타내게 된다. 기둥의 구조적 성능의 열화정도는 화재동안 기둥단면에 전달된 열의 양과 관련이 있다. 이를 예측하기 위한 합리적인 열 전달 모델은 기둥이 가열을 받는 동안 전달된 열 정도에 따라 변하는 콘크리트의 전도율 및 열용량, 그리고 단면 내 잉여수 증발에 대한 적절한 고려를 하여야 한다. 본 연구에서 제안한 모델은 양해법 유한차분법에 근거하여 개발되었으며 기존에 제안된 모델들에 비하여 이들 모든 변수들의 영향을 적절하게 고려하고 있다. 본 연구에서 개발된 모델은 기존 화해 실험에 의한 기둥 단면 내 온도를 적절하게 예측하였다.

• 콘크리트학회논문집
• /
• 제17권6호
• /
• pp.893-902
• /
• 2005

화재에 노출된 철근콘크리트 구조물의 안정성 판단 및 보강정도를 결정하기 위하여 화해손상을 입은 철근콘크리트 기둥의 잔존거동을 예측하기 위한 합리적 모델이 필요하다 . 화해 손상을 입은 철근콘크리트 기둥의 잔존거동을 예측하기 위한 이론모델 은 기둥 내부에 전달되는 열, 구성 재료의 열화 정도, 그리고 여러 형태의 기둥단면 형상을 고려할 수 있어야 한다. 본 연구에 서 제안한 수치해석 모텔은 이러한 영향인자들을 고려한다. 개발된 모델은 화해를 입은 기둥의 잔존거동을 적절하게 예측하였다. 개발된 모델을 이용하여 피복두께, 화해노출시간, 기둥의 기하학적 형상 등이 철근콘크리트 기둥의 잔존거동에 미치는 영향 에 대하여 변수 고찰하였다. 변수고찰 결과 장기간 화해에 따른 기둥의 잔존내력 감소가 심각하게 나타났으나 기타 변수들의 차이에 따른 잔존거동의 차이는 적은 것으로 나타났다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1524-1529
• /
• 2003

We was made 150L an water storage electric boiler and obtained various performances of the storage, radiant and keeping by experimentation, The storage performance is that the heat were off about 50 minutes after heating start, Then the temperature of outlet was arrived the stead state at $91^{\circ}C$ and the storage performances was appeared 93.64%, In the radiant performance, the water temperature was decreased from $90^{\circ}C$ to $44.8^{\circ}C$ after 960 minutes, Then the calorific value changed from 675kcal/h to 72kcal/h and the temperature decreased about 50%, The keeping performance showed mean temperature, $67.06^{\circ}C$ according to progress 800 minutes and the maximum temperature drop were $0.2^{\circ}C$, By the results of the performance valuation, the water storage electric boiler was verified fitted quality on the test prescription of KERI(Korea Electrotechnology Research Institute).

• 전기학회논문지
• /
• 제58권5호
• /
• pp.1050-1056
• /
• 2009

Heart Rate Variability(HRV) is a parameter that represents monitoring variability of time intervals between R-peak in electrocardiography. HRV serves to various applications, such as indices of autonomic functions, prediction of cardiac sudden death, assessment of stress and emotional, etc. However, as measuring R-peak in ECG needs at least 3-electrodes, and it is inconvenient for end users. In this paper, we suggested the modified laplacian electrodes for measuring HRV at one-point, which are producted by MEMS fabrication and have the two circular electrodes on the pad. For optimal position and direction, we performed an experiment that compared with pearson correlation coefficient and the amplitude of signals, between standard lead II and proposed electrodes. We analyzed the HRV parameters, such as standard deviation of the NN interval(SDNN), high frequency(HF), low frequency(LF), LF/HF ratio. The result showed that the average correlation coefficient and amplitude are 0.967 and 0.685 mVpp at the position 2. The coeffiecient correlation between the standard HRV and proposed electrode-HRV is 0.999

• 콘크리트학회논문집
• /
• 제15권6호
• /
• pp.866-876
• /
• 2003

철근 콘크리트 기둥 부재의 경우 하중을 지지한 상태에서 화재의 영향을 받기 때문에 일반적인 재료실험 연구 결과는 그 구조적 거동에서 상이한 거동을 나타낸다. 본 연구에서는 350${\times}$350${\times}$3360mm의 실물크기 철근 콘크리트 기둥 12개에 대하여 재하 하중의 크기, 가열시간, 피복두께, 편심 크기 등을 변수로 하여 화해 시 이들 변수들의 영향을 고찰하였다. 고찰 대상은 기둥 콘크리트의 폭열, 기둥의 길이방향 팽창 및 수축, 좌굴 등이다. 이들 변수들이 기둥 축방향 팽창과 수축, 회전, 좌굴, ISO 기준에 따른 내화력, 구조적 안정성 등에 미치는 영향을 실험에 근거하여 정성적으로 평가하였다. 실험 결과, 축방향 수축은 가열시간에 가장 큰 영향을 받으며 철근이나 부재의 좌굴은 축력의 크기, 가열시간, 피복두께, 편심의 유무에 따른 순으로 영향을 받음이 관찰되었다. 실험 관찰을 통하여 ISO 기준에서 제시한 내화기준에 대한 정성적인 평가를 실시하였다.

• Journal of Acupuncture Research
• /
• 제21권1호
• /
• pp.240-251
• /
• 2004

Objective: We have studied to know effects of acupuncture at SI3, BL40, SI3 BL40 on mechnical allodynia, cold allodynia and c-fos protein expression in a model of neuropathic pain of rat. Methods: A model of neuropathic pain was made by injuring tibial nerve and sural nerve while common peroneal nerve was maintained. after 2 weeks, we performed behavioral tests for 7 days to try out mechnical allodynia using von frey filament and cold allodynia using acetone, which are calculated by counting withdrawal response on foot. Rat brains removed and sliced on 8th days. Serial sections were immunohistochemically reacted with polyclonal c-fos antibody. The numbers of c-Fos protein immunoreactive neurons in the central gray were examined using scion image program. Results: Mechanical allodynia in the SI3, BL40, SI3 BL40 groups were diminished compared with the control group. Cold allodynia in the SI3, BL40, SI3 BL40 groups were diminished compared with the control group. c-Fos protein expression on the central gray in the SI3 group were lower than that of the control group. Conclusions: We have noticed that acupuncture at SI3, BL40, SI3 BL40 diminished mechanical allodynia and cold allodynia in a model of neuropathic pain compared with the control group. c- Fos protein expression in the central gray of that group was also decreased compared with the control group. pain control using acupunture was accumulated as time goes by. This study can be used as a basic resource on a study and a treatment of pain.

• Journal of Periodontal and Implant Science
• /
• 제29권3호
• /
• pp.703-715
• /
• 1999

The purpose of this study was to evaluate the degree of wear of periodontal curet's cutting edges made by three different manufacturers. In the first case of the experiment, this study was done with each new curett in the following three experiment. Twelve new double-ended No. 11/12 Gracy curettes from three different manufacturers (A, B and C) was randomly selected from our stock at first test. They were weared by wear tester with fixed pressure and limited distance. This study measured the width of worn curettes'cutting edge. The results were as follows ; 1)In 50 times experiment, this study discoverd that each manufacturer's curette was appeared with different degree of wear (p<0.01) 2)In 100 times experiment, this study result similarly to the 50 times experiment(p<0.01). 3)In 150 times experiment, the result of this study were alike as the X50 experiment and X100 experiment. In the second case of the experiment, the study was done with a curett of a manufacturer in the following three experiment. Two double-ended No. 11/12 Gracy curette from three different manufactures (A, B and C) was randomly selected from our stock at second test. 1)In 50 times experiment, this study discovered that each manufacturer's curette was appeared with different degree of wear (p<0.05). 2)In 100 times experiment, the result was same, compared with the 50 times experiment. 3)In 150 times experiment, this study also discovered that the result was same with the result of the upper two cases. In conclusion, this study discovered that the two cases of experimental were shown with a same result.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2007년 가을학술발표회
• /
• pp.665-678
• /
• 2007

It was applied the grouting method to fill densely the space between the bottom of the caisson and the ground with the grout mixture mixed with anti-washout admixture after locating accurately the precast caisson on three concrete landing pads but it is far different from a costly conventional method, which place concrete to build the foundation of reinforcement concrete on the spot after excavating inside of the temporary coffering wall for the bridge foundation in the sea. To verify the grouting method in advance, the full-scale trial test was performed twice on the land. After confirming the fluidity of material for the injection and some possible problems during construction and then enhancing the original design, the main process is ongoing and it has been finished 12 spots until now. The purpose of this study is to introduces for the first time in Korea the grouting method including the automatic and the manual monitoring process applied to, based on the main process of the caisson foundation finished already in the site. In a similar construction it is sincerely expected to be referred to in the future.

• Journal of Microbiology and Biotechnology
• /
• 제9권6호
• /
• pp.832-838
• /
• 1999

Two different types of lipases (lipase I and lipase II) secreted into culture medium by Rhizopus sp. L-I were purified using a hydrophobic chromatography and were partially characterized. Both enzymes were monomeric as revealed by SDS-PAGE and gel filtration. The molecular masses of the enzymes were identified as 45 kDa (lipase I) and 69 kDa (lipase II). The isoelectric points were estimated to be 3.6 and 5.2 for lipase I and lipase II, respectively. pH and temperature activity optima for lipase I were as 7.5 and $50^{\circ}C$, respectively, whereas the corresponding parameters for lipase II were 6.0 and $45^{\circ}C$. The amino terminal sequences of lipase I and lipase II, determined by Edman degradation, were found to be Leu-Val-Met-Ile-Gln-Arg and Leu-Val-Met-Lys-Gln-Arg, respectively. By western blotting analysis, the two lipases were found to have a common antigenic determinant. Immuno-electron cytochemistry conducted with polyclonal anti-lipase I antibody indicated the enzyme located in both the periplasm and the adjacent vesicles of fungal hyphae. Fortunately, the sites on the cell envelope where lipase was exported into the culture medium was also identified.

• Journal of Preventive Medicine and Public Health
• /
• 제30권4호
• /
• pp.719-728
• /
• 1997

To guarantee the inter-reviewer reliability is very important in evaluating the quality of large number of clinical research papers by multiple reviewers. We cannot find reports on statistical methods for evaluating reliability for multiple raters in clinical research field. The purpose of this paper is to introduce the statistical methods focused on kappa statistic and five kinds of loglinear models for, which can be applied when evaluating the reliability of multiple raters. We have applied these methods to the result of a project, in which seven reviewers have evaluated the quality of 33 papers with regard to four aspects of paper contents including study hypothesis, study design, study population, study method, data analysis and interpretation. Among the five loglinear models including Symmetry model, Conditional symmetry model, Quasi-symmetry model, Independence model, and Quasi-independence model, Quasi-symmetry model shows the best model of fitting. And the level of reliability among seven reviewers revealed to be acceptable as meaningful.