• Journal of the Korean Wood Science and Technology
• /
• v.33 no.1 s.129
• /
• pp.7-16
• /
• 2005

This study was carried out to evaluate the structural property of double shear bolted connections in Korean Larch. For the main member, sawn lumber and Glulam were used in which thickness of lumber is 39 mm, 89 mm, 139 mm, 189 mm and Glulam 80 mm, 140 mm, 170 mm. For the side member, sawn lumber and steel plate were used in which thickness of lumber is the same of the main member and steel plate is 6mm. And connections were jointed by M12, M16, M20 bolts which were usually used for wood constructions in Korea. Directions of loading to connections were perpendicular and parallel to grain of main and side member. First, through the dowel bearing test, the dowel bearing strength was evaluated and through the bolt bending tests, the bolt bending strength was evaluated. And then experiments for the connection were performed. Obtained results from experiments were compared with calculated values by EYM and analyzed. Strength of double shear bolted connections in Korean Larch was similar or higher than calculated value by EYM. Especially when the side member was made by the sawn lumber, it was similar to the calculated value. In failure mode, the mode was effected by the knot and the dry defect. In the thin main member, it was shown mode I and as the thickness of the main member was thicker, it was changed into mode III.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.11 no.3
• /
• pp.235-240
• /
• 2001

This study was performed to compare the lead levels of 20 quality control standard samples(KOSHA:18-2000) and 72 field samples in lead-acid battery manufacturing plant between ICP and portable-XRF methods. 1. While the proficiencies of 20 quality control standard samples by ICP were 100%, those of analytic result values by XRF were 75%. 2. The correlation coefficient(r) between the reference values for quality control (REF) and the analytic result values by ICP (ICP) was 1.0(p<0.05), and simple linear regression equation and the coefficient(R2) were REF = -0.0009 + 1.016 ICP and 0.9997, respectively. 3. The correlation coefficient(r) between the analytic result values of quality control standard samples by ICP (ICP) and by XRF (XRF) was 0.975(p<0.05), and simple linear regression equation and the coefficient(R2) were ICP = -0.0003 + 1.002 XRF and 0.950, respectively. 4. The correlation coefficient(r) between the analytic result values for lead samples of a lead-acid battery manufacturing plant by ICP (ICP) and by XRF (XRF) was 0.993(p<0.05), and simple linear regression equation and the coefficient(R2) were ICP = -2.058 + 0.996 XRF and 0.987, respectively. 5. While the frequency distributions of XRF /ICP(Ratio) for each ICP concentration levels in a lead-acid battery manufacturing plant revealed high proportion in ratio range of 0.876-1.125 than in ration range of 1.126-1.375. Also, ICP concentration level in ration range of 0.786-1.125 was increased with increase of frequency distribution of XRF/ICP. 6. The limit of detection of XRF on lead was determined to be $6.11{\mu}g$/filter The data presented in this study indicated that relationship for lead level of quality control samples and field samples in a lead -acid battery manufacturing plant by ICP and portable-XRF methods was proved. The practicing industrial hygienist can use portable-XRF to produce a rapid on-site determination of lead exposure that can immediately becommunicated to workers and help identify appropriate levels of personal protection.

• Korean Journal of Head & Neck Oncology
• /
• v.19 no.1
• /
• pp.41-46
• /
• 2003

Background and Objectives: Surgical ablation of tumors in the oral cavity and the oropharynx results in a three dimensional defect because of the needs to resect the adjacent area for the surgical margin. Although a variety of techniques are available, radial forearm free flap has been known as an effective method for this defect, which offers a thin, pliable, and relatively hairless skin and a long vascular pedicle. We report the clinical results of our 54 consecutive radial forearm free flaps used for oral cavity and oropharynx cancers. Materials and Methods: We reviewed the medical records of patients who were offered intraoral reconstruction with a radial forearm free flap after ablative surgery for oral cavity and oropharyngeal cancers from August 1994 to February 2003 and analyzed surgical methods, flap survival rate, complication, and functional results. Among these, 20 cases were examined with modified barium swallow to evaluate postoperative swallowing function and other 8 cases with articulation and resonance test for speech. We examined recovery of sensation with two-point discrimination test in 15 cases who were offered sensate flaps. Results: The primary sites were as follows : mobile tongue (18), tonsil (17), floor of mouth (4), base of tongue (2), soft palate (2), retromolar trigone (3), buccal mucosa (1), oro-hypopharynx (6), and lower lip (1). The paddles of flaps were tailored in multilobed designs from oval shape to tetralobed design and in variable size according to the defects after ablation. This procedures resulted in satisfactory flap success rate (96.3%) and showed good swallowing function and social speech. Eight of 15 cases (53.3%) who had offered sensate flap showed recovery of sensation between 1 and 6 postoperative months (average 2.6 month). Conclusion: The reconstruction with radial forearm free flap might be an excellent method for the maximal functional results after ablative surgery of oral cavity and oropharyngeal cancers that results in multidimensional defect.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.6 s.58
• /
• pp.176-182
• /
• 2009

Other damage can occur due to the preexisting dull structure and installation of nonenvironmental-friendly concrete structure, lack of function for preventing coastal erosion. Increase of personal income and fast spread of the concept of waterfront casued the initiation of many project to improve aging coastal ports. However, none of environment-friendly structure has been developed and pre-existing solid block, igloo block, tunnel block are used commonly. In piers and lighter's wharf where the ships are mooring, resonance by the generation of a reflected wave caused by penetration wave in the port and port wave increases wave heights in the port and makes difficult to maintain the temperature, causes problems in mooring ships and cargo-working, and eventually increase the occurance of damages of the small ships by the collision. Therefore, development of new types of blcok is necessary. To apply Coastal Environments block developed for this reason, it requires allowable bearing capacity evaluation of shear key. For this study, we made test specimen for connecting part of C.E. Block, and conducted friction test of boundary surface. Data obtained by the experiment was analyzed by finite element analysis and assessed the coefficient of friction between C.E. Block and boundary surface.

• FLOWER RESEARCH JOURNAL
• /
• v.16 no.3
• /
• pp.153-160
• /
• 2008

This experiment was conducted to find out an adequate shading level (0, 55, 74, and 95%) on the shoot growth of rooted cuttings of native Hydrangea serrata for. acuminata. New shoot height (NSH), length and width of leaf, and stem diameter under 55% shading were the greatest. Net photosynthetic rate under 55% shading was the greatest, while intercellular $CO_2$ concentration was the least in this treatment. The greatest content of photosynthetic pigments (total chlorophyll, carotenoid) was observed in leaves grown under a 74%, followed by a 55% shading level. Leaf stomata were observed on the abaxial surface, but those on adaxial surface in all shading treatments were not observed. In 95% shading, decreased stomatal density and development were observed. Higher stomatal density and development, however, were observed in 55% shading. Therefore, it is concluded that a 55% shading level was the optimum for growth of new shoots of rooted cuttings of native H. serrata for. acuminata.

• Journal of agriculture & life science
• /
• v.46 no.2
• /
• pp.27-33
• /
• 2012

In this study, we evaluated environmental-friendly disease control methods using essential oils, antagonistic bacteria, or cooking oil and egg yolk mixture (COY). Among the five tested plant essential oils, Eucalyptus approximans oil shown the highest effect to control of the downy mildew disease (60% disease control value). Interestingly enough, well known antagonistic bacteria against various fungal pathogens were appeared lower control efficiency than plant essential oils. In field conditions, the cooking oil and yolk mixture (COY) treatments shown significantly decreased the downy mildew incidence with 0.3% (disease conttrol value 84%) and 0.5% concentration (disease control value 91%). Our findings suggest that the COY has a great potential as the eco-friendly downy mildew disease control formulation.

• Journal of Energy Engineering
• /
• v.28 no.3
• /
• pp.42-54
• /
• 2019

The solar and wind power is spreading as a means to $CO_2$ reduction, but it has the characteristics of the volatility depending on the weather changes. This article aims to estimate the additional integration costs in Korea electric system in response to such volatility of increasing solar and wind power generation, using Korea electric power trading analyzer(KEPTA). The analysis utilizes the statistics of "8th Basic Plan for Long-term Electricity Supply and Demand" and "Renewable Energy Plan 3020". As the results, integration costs will be estimated 13.94Won/kWh~32.55Won/kWh, consisting of 8.94Won/kWh as back-up costs, 1.03Won/kWh~4.45Won/kWh as balancing costs, and 3.97Won/kWh~19.16Won/kWh as grid-costs. These results suggest that when the integration costs are secured, Korea electric system will be expected in the stable situation. This article leaves the further studies with taking the technological development of solar and wind power generation, the introduction of energy storage system, and wholesale price of electricity into consideration.

• Journal of Ginseng Research
• /
• v.39 no.1
• /
• pp.46-53
• /
• 2015

Background: Glucocorticoids (GCs) are commonly used in many chemotherapeutic protocols and play an important role in the normal regulation of bone remodeling. However, the prolonged use of GCs results in osteoporosis, which is partially due to apoptosis of osteoblasts and osteocytes. In this study, effects of Korean Red Ginseng (KRG) on GC-treated murine osteoblastic MC3T3-E1 cells and a GC-induced osteoporosis mouse model were investigated. Methods: MC3T3-E1 cells were exposed to dexamethasone (Dex) with or without KRG and cell viability was measured by the 3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide (MTT) assay. Realtime polymerase chain reaction was performed to evaluate the apoptotic gene expression; osteogenic gene expression and alkaline phosphatase (ALP) activity were also measured. Western blotting was performed to evaluate the mitogen-activated protein kinase (MAPK) proteins. A GC-induced osteoporosis animal model was used for in vivo study. Results and conclusion: The MTT assay revealed that Korean Red Ginseng (KRG) prevents loss of cell viability caused by Dex-induced apoptosis in MC3T3E1 cells. Real-time polymerase chain reaction data showed that groups treated with both Dex and KRG exhibited lower mRNA levels of caspase-3 and -9, whereas the mRNA levels of Bcl2, IAPs, and XIAP increased. Moreover, groups treated with both Dex and KRG demonstrated increased mRNA levels of ALP, RUNX2, and bone morphogenic proteins as well as increased ALP activity in MC3T3-E1 cells, compared to cells treated with Dex only. In addition, KRG increased protein kinase B (AKT) phosphorylation and decreased c-Jun N-terminal kinase (JNK) phosphorylation. Moreover, microcomputed tomography analysis of the femurs showed that GC implantation caused trabecular bone loss. However, a significant reduction of bone loss was observed in the KRG-treated group. These results suggest that the molecular mechanism of KRG in the GC-induced apoptosis may lead to the development of therapeutic strategies to prevent and/or delay osteoporosis.

• Journal of the Korean Institute of Gas
• /
• v.25 no.5
• /
• pp.1-10
• /
• 2021

Semiconductor Photo Resist (PR) automation equipment uses a mixture of several flammable substances, and when it leaks during the process, it can lead to various accidents, therefore, risk assessment is necessary. This study analyzed the frequency of leakage of Acetone and PGMEA used in PR automation equipment and the frequency at which such leakage could lead to a fire accident through the frequency analysis method, and evaluated the need for additional risk reduction measures in the current facility. Based on the process leak data and ignition probability data of IOGP, leak frequency analysis and ignition probability were derived, and the frequency of actual fire accidents was analyzed by combining them. The frequency of material leakage in semiconductor PR process is 7.30E-03/year, and fire accidents can occur by acetone that exists above the flash point when the material is leaked, the frequency was calculated at the level of 1.24E-05/year. According to the UK HSE, for a major accident occurring with a frequency of 1.24E-05/year, it is defined as "Broadly Acceptable", a level that does not require additional measures for risk reduction when it causes 7 or less deaths, and due to the process operated by two people, no additional risk reduction are required.

• Korean Journal of Organic Agriculture
• /
• v.26 no.4
• /
• pp.719-729
• /
• 2018

Green manure crops can be efficient replacements of high nutrient materials such as livestock compost, organic fertilizers, etc. in organic farming. Grass-legume mixtures or mixed cropping of legumes with non-legumes can aid in abating the shortcomings of each plant type under monoculture (i.e. legumes have low biomass yields while grasses are poor at fixing nitrogen). This study was conducted to investigate the effects of barley (B) and hairy vetch (H) mixtures on green manure yield in nutrient accumulated organic upland soils of Korea. In one cropping season, single crops of barley and hairy vetch (Barley: 160 kg/ha, Hairy vetch: 90 kg/ha) as well as mixtures of both crops at different seeding rates (B66:H33, B33: H66) were grown and the obtained results are as shown below. The biomass yield and nutrient productivities were higher in barley-hairy vetch mixture. The biomass yield and total phosphorus content were higher for the mixed crops by 78~132% and 200% respectively than those of the hairy vetch monoculture. Total nitrogen content of the mixed crops was also higher than those of the barley monoculture by 43~44%. The biomass yield (5.60 Mg/ha) and nutrient contents (87.7 kg N/ha, 23 kg $P_2O_5/ha$) were highest in the case of B66:H33 seeding rate. Accordingly, this study concludes that the barley-hairy vetch mixtures cropped at B66:H33 seeding rate is efficient in increasing green manure productivity due to complementary effects observed and the highest biomass yield and nutrient contents.