• Environmental Engineering Research
• /
• 제16권2호
• /
• pp.55-60
• /
• 2011

The removal of hexavalent chromium from aqueous solutions onto modified holly sawdust was studied at varying initial hexavalent chromium concentrations, adsorbent doses, pHs and contact times. The removal of hexavalent chromium from aqueous solutions increased with increasing adsorbent dosage and contact time. The percentage of hexavalent chromium removed from the aqueous solutions decreased with increasing hexavalent chromium concentration and pH of the solution. The kinetics of the adsorption of hexavalent chromium onto modified holly sawdust was analyzed using pseudo first-order and pseudo second-order models. The pseudo second-order model described the kinetics of adsorption of hexavalent chromium. The Langmuir and Freundlich isotherm models were used for modeling of the adsorption equilibrium data. The Langmuir isotherm model well described the equilibrium data for the removal of hexavalent chromium by modified holly sawdust. The obtained maximum adsorption capacity was 18.86 mg/g at pH 7. The results showed that modified holly sawdust can be used as a low cost adsorbent for the treatment of aqueous solutions containing chromium.

• 한국표면공학회지
• /
• 제44권1호
• /
• pp.7-12
• /
• 2011

The effect of organic additives, polyethylene glycol (PEG), on the trivalent chromium electroplating was analysed in the view point of current efficiency, solution stability and metallurgical structure. It was measured that PEG-containing trivalent chromium solution had about 10% higher current efficiency than pure solution and controlled the micro-crack density of electrodeposits. PEG exhibited profound effect on the solution stability by reducing the consumption rate of formic acid which acts as a complexant to lower the activation energy required for electrochemical reduction of trivalent chromium ions. It was also revealed that the formation of chromium carbide layer was facilitated in the presence of polyethylene glycol, which meant easier electrochemical codeposition of chromium and carbon, not single chromium deposition. Trivalent chromium layer formed from PEG-containing solution was amorphous with local nano-crystalline particles, which were prominently developed on the entire surface after non-oxidative heat treatment.

• 대한예방한의학회지
• /
• 제13권2호
• /
• pp.1-18
• /
• 2009

Objectives : In order to evaluate the cytotoxicity of hexavalent chromium, the cytoprotective effect of phenolic compounds against hexavalent chromium-induced cytotoxicity, cell viability, cell adhesion ability, lactate dehydrogenase(LDH) activity, and morphological changes of cells were examined. Methods : We measured the cytotoxicity of hexavalent chromium with 3-[4,5-dimethyl-thiazol-2-yl]-2,5-diphenyltetrazolium bromide(MTT), 2,3-bis-[2-methoxy-4-nitro-5-sulfophenyl]-2H-tetrazolium-5-caboxanilide (XTT), LDH and DPPH methods. Results : The cytotoxicity of hexavalent chromium($IC_{50}$, $44.0-51.0{\mu}M$) was high according to the toxic criteria. Cytoprotective effect of phenolic compounds against $IC_{50}$ value of hexavalent chromium in cell morphology increased in a concentration-dependent manner. Conclusions : These results suggest that 3,4,5-trihydroxybenzoic acid may be used as a cytoprotective agent against chromium(IV)-mediated cytotoxicity.

• 한국재료학회지
• /
• 제21권12호
• /
• pp.679-684
• /
• 2011

One of the trace constituents included in cement clinker, chromium, has become prominent and highly noticed lately as a social issue both inside and outside of this country because it affects the human body negatively. The purpose of the present study was to investigate leaching properties of water-soluble hexavalent chromium by different manufacturing conditions of cement clinker. Raw materials were prepared to add different $SiO_2$, $Al_2O_3$ and $Fe_2O_3$ sources. After the raw materials, such as limestone, sand and clay, iron ore was pulverized and mixed, and the raw meal was burnt at $1450^{\circ}C$ in a furnace with an oxidizing atmosphere. Leaching of soluble hexavalent chromium showed a tendency to decrease with an increasing LSF and IM. However, leaching of soluble hexavalent chromium increased with an increasing S.M. Alkali contents of iron source minerals is closely related to the leaching properties of soluble hexavalent chromium. Green sludge has the highest content of alkali added; leaching of water-soluble hexavalent chromium was mostly high. In order to reduce the water-soluble hexavalent chromium in cement, reducing the alkali content in raw materials is important.

• 한국표면공학회지
• /
• 제47권3호
• /
• pp.116-120
• /
• 2014

The addition of cyclo propane carbonyl (cpc) to chromium electroplating bath resulted in a chromium deposit which had greatly improved mechanical properties compared to conventional chromium deposits in condition of heat treatment at high temperature. The as-deposited layers had a Vicker's hardness of about 1170, which is comparable to that of conventional chromium plating deposits. With annealing, the hardness goes through a maximum of 1650 at $600^{\circ}C$. Generally speaking, the hardness of conventional plating decreases monotonically with heat treatment. X-ray diffraction show that annealing up to above $400^{\circ}C$ causes formation and growth of chromium crystallites and that chromium carbides form at above $500^{\circ}C$ temperature.

• 한국표면공학회지
• /
• 제30권2호
• /
• pp.104-110
• /
• 1997

Conventional hexavlent chromium electroplating baths deposit the matal at low cathode efficiency and have poor covering and throwing power. The processs also generate hazardous wastes. To overcome many of the disadvantages of hexavalent chromium plating the use of trivalent chromium has advocted. After Yoshida, who first studied trivalent chromium plating, using ammonium sulfate and urea, there are numerous report describing the trivalent chromium electropating process using complexing agents. This study investigaten trivalent chromium plating electrolyte solutious containing formate as a complexing agent and ammouim chloride for conducting agent. The effects of composition and operating conditions on deposits and current efficiencies were investigated in trivalent chromium plating baths by analyzing the relationship pulse conditions and surface morphology The surface morphology of the deposits was observed by SEM. pulse electrolysis has been effective on obtaining a smooth with high current efficiency comparing with D.C. electrolysis in trivalent chromium solution.

• 한국토양비료학회지
• /
• 제43권3호
• /
• pp.296-303
• /
• 2010

Chromium as a constituent of rocks occurs naturally in the environment in varying concentrations. However, the human activity has changed the geochemical cycle of chromium in the environment and has caused the chromium accumulation in soils. Korean soils revealed a wide range of chromium contents depending on parent material and land use. The total chromium contents of volcanic ash soils in Jeju, which were determined using $HNO_3$ + $HClO_4$ + HF, ranged from 434 to 1,164 mg $kg^{-1}$. The 'ecological' total chromium contents extracted using conc. HCl + conc. $HNO_3$ (aqua regia) in the same soils varied in a lower range of 50-189 mg $kg^{-1}$ (averaged percentage of aqua regia contents in $HNO_3$ + $HClO_4$ + HF contents: 14.9%). Serpentine soils in Andong showed a 'ecological' total chromium content of 309 mg $kg^{-1}$ and against it granitic soils in Andong only 20 mg $kg^{-1}$. In uncontaminated forest soils of Korea, the 'ecological' total chromium contents varied from 4.89 to 106 mg $kg^{-1}$ and the soluble chromium contents determined using 0.1 M HCl ranged from 0.01 to 0.64 mg $kg^{-1}$ (averaged percentage of 0.1 M HCl contents in aqua regia contents: 0.4%). Arable lands contained more soluble chromium than reported in forest soils (averaged soluble chromium: 0.36 and 0.09 mg $kg^{-1}$, respectively). In particular, the soluble chromium contents in greenhouse, orchard and upland soils were higher than in contaminated soils near mine and industrial site (maximum contents: greenhouse 15.3 mg $kg^{-1}$; upland 12.1 mg $kg^{-1}$; orchard 8.29 mg $kg^{-1}$; mine site 4.76 mg $kg^{-1}$; industrial site 2.80 mg $kg^{-1}$). On the basis of these results a accumulation of chromium in some specific arable lands can be assumed, probably by long-continued applications of fertilizers or soil amendments containing chromium. In Korean Enforcement Decree of the Soil Environment Conservation Act soil standards for total chromium do not exist yet.

• 한국재료학회지
• /
• 제20권4호
• /
• pp.181-186
• /
• 2010

Since it was developed by Joseph Aspdin, cement has been a common construction materials up to the present time. However, there are trace constituents in cement clinker. One of the trace constituents included in cement clinker, chromium, has become prominent and highly noticed lately as a social issue both inside and outside of this country because it affects the human body negatively. The aim of the present study was to investigate the concentration of water-soluble hexavalent chromium in cement clinker by using industrial by-products. For that reason, raw materials were prepared to add different $SiO_2$, $Al_2O_3$, and $Fe_2O_3$ sources. After the raw materials such as the limestone, the sand and the clay, iron ore was pulverized and mixed, and the raw meal was burnt at about $1450^{\circ}C$ in a furnace with an oxidizing atmosphere. The part in the raw materials of the clinker was substituted with slag, sludge, etc. and this was used to manufacturing cement clinker. To investigate the water-soluble hexavalent chromium content in clinker, raw meal was prepared by changing the modulus, the type, and the content of clinker materials and tested concentrations of hexavalent chromium in the clinkers. To determine $Cr^{+6}$ formation of the clinker, tests were done with raw meals adding chromium by using different industrial by-products. Consequently because the chromium was to be included in the raw materials of the clinker, production of Portland cement clinker was included with the chromium. Also, the chromium was converted into hexavalent chromium in the burning process.

• 한국산업보건학회지
• /
• 제11권1호
• /
• pp.9-16
• /
• 2001

Chromium exposure can be in the forms of environmental pollution and occupational exposure. The harmful effects of chromium on the body greatly differ depending on its valence or solubility. Accordingly, the recommended permissible exposure limit for each chromium compound is different. This study investigated the increase or decrease of distribution and excretion of total chromium exposed simultaneously the soluble Cr+6 and Cr+3 compounds. There were no difference of total chromium concentration in plasma, red bloods cells, urine, organs between simultaneously injected and individually injected soluble Cr+6 and Cr+3 compound. The chromium clearances in urine also showed that there were two phases in the two groups. In the first phase, biological half lives of the total chromium of the two groups have been similar within 24 hr., but in the second phase, biological half life of the group injected simultaneously was 62.7 hr. and was less than that of the other group's 188.3 hr. The average concentration of total chromium in plasma was same with the control, and that of RBCs was $0.218nmol/m{\ell}$ and was slightly increased in comparison with $0.121nmol/m{\ell}$ of the control, which was not statistically significant. As a result, there were no differences of distribution and excretion of chromium between the group exposed simultaneously and the other group exposed separately the soluble Cr+6 and Cr+3 compounds. The biological half life of chromium of the former group in urine was less than that of the other group.

• Asian-Australasian Journal of Animal Sciences
• /
• 제18권3호
• /
• pp.403-408
• /
• 2005

This study investigated the effects of chromium propionate on growth performance, serum traits and immune response in weaned pigs. Twenty-four 4 wk-old crossbred weanling pigs (initial body weight about 9.52${\pm}$0.48 kg) were randomly allotted into one of two groups, a control group (basal diet), chromium propionate group (diet supplemented with 200 ${\mu}g$ $kg^{-1}$ (ppb) of chromium propionate). This experiment was conducted over nine weeks. Escherichia coli lipopolysaccharide (LPS) 100 ${\mu}g$ $kg^{-1}$ BW was used as the stress-inducing agent in the middle (4 wks) and final (8 wks) periods. The experimental results indicated that chromium propionate had no effect on growth performance (p>0.05). Chromium propionate supplementation reduced the percentage of LDL+VLDL (low and very low-density lipoprotein) and increased HDL (high-density lipoprotein), but did not affect other serum traits. Pigs supplemented with chromium propionate had higher antibody titers specific for sheep red blood cells (SRBC) and serum total globulin relative to the control during the final period (p<0.05). A challenge with LPS increased white blood cells in the chromium propionate group in both experimental periods (p<0.05). The chromium propionate group exhibited higher IgG and $\gamma$-globulin than the control during the middle experimental period (p<0.05). Moreover, the PHA (phytohemagglutinin) challenge result in the chromium propionate group was better than the control group (p=0.056). Greater neutrophil activity was displayed than in the control (p<0.05). This suggests that chromium propionate supplementation benefited the weaned pigs in lipoprotein and immune response.