• Bulletin of the Korean Chemical Society
• /
• 제26권7호
• /
• pp.1044-1050
• /
• 2005

The reaction of cis-[Cr([14]-decane)($OH_2)_2]^+$ ([14]-decane = rac-5,5,7,12,12,14-hexamethyl-1,4,8,11-teraazacyclotetradecane) with auxiliary ligands {$L_a$ = isothiocyanate ($NCS^-$), azide ($N3^-$) or chloroacetate(caa)} leads to a new cis-[Cr([14]-decane)($NCS)_2]ClO_4{\cdot}H_2O$ (1), cis-[Cr([14]-decane)($N_3)_2]ClO_4$ (2) or cis-[Cr([14]-decane)($caa)_2]ClO_4$ (3). These complexes have been characterized by a combination of elemental analysis, conductivity, IR and Vis spectroscopy, mass spectrometry, and X-ray crystallography. Analysis of the crystal structure of cis-[Cr([14]-decane)($NCS)_2]ClO_4{\cdot}H_2O$ reveals that central chromium(III) has a distorted octahedral coordination environment and two $NCS^-$anions are bonded to the chromium(III) ion via the Ndonor atom in the cis positions. The angle $N_{axial}-Cr-N_{axial}$ deviates by 13$^{\circ}$ from the ideal value of 180$^{\circ}$ for a perfect octahedron. The bond angle N-Cr-N between the Cr(III) ion and the two nitrogen atoms of the isothiocyanate ligands is close to 90$^{\circ}$. The bond lengths of Cr-N between the chromium and $NCS^-$groups are 1.964(5) and 2.000(5) $\AA$. They are shorter than those between chromium and nitrogen atoms of the macrocycle. The IR spectra of 1, 2 and 3 display bands at 2073, 1344 and 1684 $cm^{-1}$ attributed to the $NCS^-$, ${N_3}^-$ and caa groups stretching vibrations, respectively.

• Carbon letters
• /
• 제2권1호
• /
• pp.15-21
• /
• 2001

In this work, activated carbon fibers (ACFs) were plated with copper metal using electroless plating method and the effects of surface properties and pore structures on chromium adsorption properties were investigated. Surface properties of ACFs have been characterized using pH and acid/base values. BET data with $N_2$ adsorption were used to obtain the structural parameters of ACFs. The electroless copper plating did significantly lead to a decrease in the surface acidity or to an increase in the surface basicity of ACFs. However, all of the samples possessed a well-developed micropore. The adsorption capacity of Cr(III) for the electroless Cu-plated ACFs was higher than that of the as-received, whereas the adsorption capacity of Cr(VI) for the former was lower than that of the latter. The adsorption rate constants ($K_1$, $K_2$, and $K_3$) were also evaluated from chromium adsorption isotherms. It was found that $K_1$ constant for Cr(III) adsorption depended largely on surface basicity. The increase of Cr(III) adsorption and the decrease of Cr(VI) adsorption were attributed to the formation of metal oxides on ACFs, resulting in increasing the surface basicity.

• 분석과학
• /
• 제7권2호
• /
• pp.205-211
• /
• 1994

아세트산과 숙신산이 결합된 폴리아민-폴리우레아(CPPI와 SAPPI) 수지는 폴리에틸렌이민-폴리메틸렌폴리페닐렌 이소시안에이트(PPI) 고분자와 클로로 아세트산 또는 클로로 숙신산의 반응으로 각각 합성되었다. 이 수지들은 적외선 분광광도법 및 원소분석법으로 구조를 확인하였다. 이 수지들에 대한 3가와 6가 크롬의 흡착특성은 용액의 pH를 변화시키면서 뱃치법에 의하여 분포계수($K_d$)를 측정하여 조사하였다. 3가와 6가 크롬은 이온교환반응으로 폴리아민-폴리우레아 수지에 흡착되는 것으로 생각되었다. 이들의 최적 분리조건을 발견하고, 단지 pH를 변화시키는 단계적 용리법에 의하여 이들의 SAPPI 수지관(내경 0.6cm, 길이 10cm)으로 분리하였다. 또한 6가 크롬은 CPPI 수지관에 의하여 50배의 농축인자로 농축할 수 있다.

• Elastomers and Composites
• /
• 제50권2호
• /
• pp.103-109
• /
• 2015

In this study, epoxy/anhydride mixing ratio for the highly silica filled compounds with chromium (III) octoate catalyst was investigated at a low curing temperature ($71^{\circ}C$ for 40 hr) by evaluating the compressive strength with the weight ratio ranges from 0.3/1.0 to 1.0/1.0 of epoxy part (Part A)/anhydride part (Part B). In case of epoxy/anhydride compounds used surface unmodified silica by coupling agent, these compounds need excess anhydride unlike the weight ratio in the conventional epoxy/anhydride compounds. In curing behavior, the epoxy/anhydride compounds containing chromium (III) octoate showed high conversions at $71^{\circ}C$ for 40 hr, even if a dipropylene glycol (DPG) was not used as a polymerization initiator. Also, DPG leads to a poor epoxy network structure. In conclusion, the appropriate weight ratio of Part A/Part B of highly silica filled epoxy/anhydride compounds with chromium (III) octoate catalyst is 0.5/1.0 and the maximum amounts of silica is 1470 phr of epoxy resin.

• 대한환경공학회지
• /
• 제27권6호
• /
• pp.590-598
• /
• 2005

본 연구에서는 HPLC와 DRC ICP-MS를 연결하여 수중의 Cr(III)와 Cr(VI) 측정을 위한 최적의 분석조건을 설정하고, 서울시 6개 취수장 원수에서의 Cr(III)와 Cr(VI)의 분포 특성을 조사하였다. 크롬 종(species) 분리를 위한 HPLC 이동상으로는 tetrabutylammonium phosphate monobasic(1.0 mM TBAP), ethylenediaminetetraacetic acid(0.6 mM EDTA) 그리고 2% v/v 메탄올을 사용하였으며, flushing solvent로는 5% v/v 메탄올을 사용하였다. 또한 크롬 종 분리 시 방해물질인 $ArC^+$의 제거를 위한 반응가스로 암모니아($NH_3$) 가스를 사용하였으며, Cr(III)와 Cr(VI)의 최적의 분리를 위해 이동상의 solvent ratio, pH 유속 및 시료 주입량의 변화에 따른 시험을 실시하였다. 외국의 경우 Cr(III)가 Cr(VI)보다 분석 감도가 우수한 것으로 보고되고 있으나 본 연구 결과 반응가스($NH_3$)를 사용할 경우, Cr(III)에 비해 Cr(VI)의 분석 감도가 더 우수한 것으로 나타났으며, 검출한계는 Cr(III)와 Cr(VI)에 대해 각각 $0.061\;{\mu}g/L$, $0.052\;{\mu}g/L$로 분석시간은 3분 이내로 나타났다. 서울시 6개 취수장 원수에서의 Cr(III)는 $0.048{\sim}0.064\;{\mu}g/L$(평균 $0.054\;{\mu}g/L$), Cr(VI)는 $0.014{\sim}0.023\;{\mu}g/L$(평균 $0.019\;{\mu}g/L$)의 농도 범위로 검출되었다. 회수율은 $90.1{\sim}94.1%$ 범위로 우수하게 나타났으며, Cr(III)가 Cr(VI)에 비해 $2{\sim}3$배 정도 높은 농도로 나타났다.

• Journal of Photoscience
• /
• 제7권3호
• /
• pp.97-101
• /
• 2000

The 77 K emission and excitation spectra, and 298 K infrared and absorption spectra of mer-[CrCl(en)(dpt)]ZnCl$_4$(en=1,2-diaminoethane; dpt=1,5,9-triazanonane) have been measured. Ligand field electronic transitions due to spin-allowed and spin-forbidden are assigned. The zero-phonon line in the excitation spectrum splits into two components by 151$cm^{-1}$ /, and large$^2$E$^{g}$ splitting can be reproduced by the modern ligand field theory. It is confirmed that nitrogen atoms of the en and dpt ligands have a strong $\delta$-donor character, but chloride ligand has weak $\delta$-and $\pi$-donor properties toward chromium(III) ion.

• Journal of Photoscience
• /
• 제7권1호
• /
• pp.21-26
• /
• 2000

The photoemission and excitation spectra of cis-[Cr(cyclam)F$_2$]ClO$_4$ (cyclam = 1,4,8,11-tetraazacy-clotetradecane) taken at 77 K are reported. The 298 K mid- and far-infrared spectra are also measured. The vibrational intervals of the electronic ground state are extracted from the far-infrared and emission spectra. The ten electronic bands due to spin-allowed and spin-forbidden transitions are assigned. The zero-phonon line In the excitation spectrum splits into two components by 169 cm$^{1}$, and the large $^2$E$_{g}$ splitting can be reproduced by the ligand field theory. According to the ligand field analysis, we can confirm that nitrogen atoms of the cyclam ligand have a strong c-donor character, and fluoride ligand also has strong $\sigma$- and $\pi$-donor properties toward chromium(III) ion.n.

• 한국표면공학회지
• /
• 제52권3호
• /
• pp.111-116
• /
• 2019

Chromium was coated on a steel substrate by the Cr(III) electroplating method, and corroded at $500-900^{\circ}C$ for 5 h in $N_2/0.1%H_2S-mixed$ gas to study the high-temperature corrosion behavior of the Cr(III) coating in the highly corrosive $H_2S-environment$. The coating consisted of (C, O)-supersaturated, nodular chromium grains with microcracks. Corrosion was dominated by oxidation owing to thermodynamic stability of oxides compared to sulfides and nitrides. Corrosion initially led to formation of the thin $Cr_2O_3$ layer, below which (S, O)-dissolved, thin, porous region developed. As corrosion progressed, a $Fe_2Cr_2O_4$ layer formed below the $Cr_2O_3$ layer. The coating displayed relatively good corrosion resistance due to formation of the $Cr_2O_3$ scale and progressive sealing of microcracks.

• Bulletin of the Korean Chemical Society
• /
• 제27권5호
• /
• pp.687-693
• /
• 2006

Chromium(III) complexes, cis-[Cr([14]-decane)$(HOC _6H _4COO) _2$]$ClO _4$ I and cis-[Cr([14]-decane)(OH) $(OC _6H _4NO _2)$]$ClO _4{\cdot}H _2O$ II ([14]-decane = rac-5,5,7,12,12,14-hexamethyl-1,4,8,11-teraazacyclotetradecane) are synthesized and structurally characterized by a combination of elemental analysis, conductivity, IR and VIS spectroscopy, and X-ray crystallography. The complexes crystallizes in the monoclinic space groups, $C2 _1$/a in I and $P2 _1$/n in II. Analysis of the crystal structure of complex I reveals that central chromium(III) ion has a distorted octahedral coordination environment and two hydrogensalicylato ligands are unidentate to the chromium(III) ion via the carboxyl groups in the cis-position. For monomeric complex I the hydrogensalicylato coordination geometry is as follows: Cr-O(average) = 1.984(3) $\AA$;Cr-N range = 2.105(3)-2.141(4) $\AA$;C(24)-O(4) = 1.286(5) $\AA$;N(2)-Cr-N(4) (equatorial position) = 96.97(15)${^{\circ}}$; N(1)-Cr-N(3) (axial position) = 168.27(15)${^{\circ}}$; O(1)-Cr-O(4) = 85.70(13)${^{\circ}}$. The crystal structure of II has indicated that chromium(III) ion is six-coordinated by four secondary amines of the macrocycle, hydroxide anion and nitrophenolate anion.

• Advances in environmental research
• /
• 제1권2호
• /
• pp.167-179
• /
• 2012

Pistachio shell (Pistacia vera) (PS), a low-cost material, has been utilized for the removal of the Cr(VI) ions after treatment with citric acid. Batch experimental steps were applied to obtain Cr(VI) ion adsorption details for the equilibrium between Cr(VI) and modified pistachio shell (MPS). The influences of contact time, pH, adsorbent dose and initial chromium concentration on the adsorption performance of MPS was investigated in detail. The results displayed that adsorption of Cr(VI) by MPS reached to equilibrium after 2 h and after that a little change of Cr(VI) removal efficiency was observed. The sorption percent is higher at lower pH and lower chromium concentration. Two possible mechanisms for reduction of Cr(VI) to Cr(III) can be suggested in Cr(VI) removal. In the first mechanism, Cr(VI) is reduced to Cr(III) by surface electron-donor groups of the adsorbent and the reduced Cr(III) forms complexes with adsorbent or remains in the solution. This Cr(III) is not adsorbed by adsorbent at pH 1.8. But in second mechanism, the adsorption-coupled reduction of Cr(VI) to Cr(III) occurred on the adsorbent sites. The equilibrium sorption capacity of Cr(VI) ion after 2 h was 64.35 mg/g for MPS.