• Journal of the Korean Chemical Society
• /
• v.57 no.6
• /
• pp.703-711
• /
• 2013

In the present investigation, kinetic studies of oxidation of formic acid with and without catalyst and promoter in aqueous acid media were studied under the pseudo-first order conditions [formic acid]T ${\gg}[Cr(VI)]_T$ at room temperature. In the 1,10-phenanthroline (phen) promoted path, the cationic Cr(VI) phen complex is the main active oxidant species undergoes a nucleophilic attack by the substrate to form a ternary complex which subsequently experiences a redox decomposition through several steps leading to the products $CO_2$ and $H_2$ along with the Cr(III) phen complex. The anionic surfactant (i.e., sodium dodecyl sulfate, SDS) and neutral surfactant (i.e., Triton X-100, TX-100) act as catalyst and the reaction undergo simultaneously in both aqueous and micellar phase with an enhanced rate of oxidation in the micellar phase. Whereas the cationic surfactant (i.e., N-cetyl pyridinium chloride, CPC) acts as an inhibitor restricts the reaction to aqueous phase. The observed net enhancement of rate effects has been explained by considering the hydrophobic and electrostatic interaction between the surfactants and reactants. The neutral surfactant TX-100 has been observed as the suitable micellar catalyst for the phen promoted chromic acid oxidation of formic acid.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.13 no.4
• /
• pp.381-390
• /
• 1991

The purpose of this study was to select the absorbable suture material with the lowest level of foreign body reaction in the extraoral field. The absorbable sutures tested were polyglactin 910(Vicryl), polyglycolic acid(Dexon), and chromic gut. Black silk served as to control suture. Eighteen domestic rabbits served as the animal model for testing purposes. After shaving the fur, A six centimeter incision was made in the hind quarter of all eighteen animals. Each wound was then closed wit two Vicryl, two Dexon, and two chromic gut sutures. All wounds were closed in the same manner. A similar wound was made on the oppsite side and closed with black silk suture. Three rabbits were then sacrificed on postoperative day one, three, seven fourteen, twenty-one, and twenty-eight. The surgical sites were then examined histologically. 1. On days one, three, and seven all suture materials as a similar severe level of inflammatory response. On the fourteenth day the inflammatory reaction of Vicryl was minimal, chromic gut was moderate, and Dexon was severe, Black silk control groups demosnstrated the most severe levels of inflammation of all sutures tested from day fourteen to twenty-eight. 2. On the fourteenth day all absorbable suture materials demonstrated similar minimal levels of resorption. At twenty-eight days Vicryl demonstrated a greater amount of resorption than Dexon or cromic gut suture. There was no resorption noted in the black silk control groups through day twenty-eight. 3. Due to its decreased level of inflammatory response in the animal model, Vicryl might be expected to as a decreased level of response in humans. It is felt that Vicryl is preferred to Dexon or chromic gut for extraoral suturing.

• Journal of the Korean Chemical Society
• /
• v.56 no.6
• /
• pp.720-724
• /
• 2012

Under pseudo-first order conditions, the monomeric species of Cr(VI) was found to be kinetically active in the absence of phenanthroline (phen) whereas in the phen-promoted path, the Cr(VI)-phen complex undergoes a nucleophilic attack by etane-1,2-diol to form a ternary complex which subsequently experience a redox decomposition leading to hydroxy ethanal and Cr(III)-phen complex. The effect of the cationic surfactant (CPC), anionic surfactant (SDS) and neutral surfactant (TX-100) on the unpromoted and phen-promoted path have been studied. Micellar effects have been explained by considering the preferential partitioning of reactants between the micellar and aqueous phase. Combination of TX-100 and phenanthroline will be the ideal for chromic acid oxidation of ethane-1,2-diol in aqueous media.

• Archives of Pharmacal Research
• /
• v.12 no.2
• /
• pp.73-78
• /
• 1989

Oxidation of isophorone by various fungi was examined. Aspergillus niger oxidized isophorone to 4-hydroxyisophorone, 3-hydroxymethyl-5,5-dimethyl-2-cyclohexen-1-one and 5-hydroxymethyl-3,5-dimethyl-2-cyclohexen-1-one. 4-Oxoisophorone obtained by chromic acid oxidation of 4-hydroxyisophorone was transformed to 2,3,5-trimethyl-p-benzoquinone by acid treatment.

• Bulletin of the Korean Chemical Society
• /
• v.8 no.3
• /
• pp.183-185
• /
• 1987

1-Methylimidazolium chlorochromate was prepared by the addition of 1-methylimidazole into a solution of chromic trioxide in 6M hydrochloric acid and obtained in high yield as bright yellow crystalline solids. The reagent was found to be very effective for the oxidation of alcohols and the oxidative cleavage of oximes to the corresponding carbonyl compounds.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2002.05a
• /
• pp.35-35
• /
• 2002

Atomic force microscopy was applied to study the formation and growth mechanism of thin chrome layers prepared under various pulse plating conditions. The chrome was electro-deposited from an electrolyte bath containing 250 gl-l of chromic acid, 25 gl-l of sulfuric acid using direct current density of $1.6{\;}mA.$\textrm{mm}^{-2} and pulse currents with on-off time from 5 to 900 ms. The higher current density enhanced nucleation rate which resulted in refining grain size. The chrome growth kinetics determining nodule size and shape significantly depends on the duration of on-time rather than duration of off-time and on/off time ratio.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.8
• /
• pp.708-713
• /
• 2005

An alumina membrane with nano-sized pore array by anodic oxidation using the thin film aluminum deposited on silicon wafer was fabricated. It Is important that the sample prepared by metal deposition method has a flat aluminum surface and a good adhesion between the silicon wafer and the thin film aluminum. The oxidation time was controlled by observation of current variation. While the oxalic acid with 0.2 M was used for low voltage anodization under 100 V, the chromic acid with 0.1 M was used for high voltage anodization over 100 V. The nano-sized pores with diameter of $60\~120$ nm was obtained by low voltage anodization of $40\~80$ V and those of $200\~300$ nm was obtained by high voltage anodization of $140\~200$ V. The pore widening process was employed for obtaining the one-channel with flat surface because the pores of the alumina membrane prepared by the fixed voltage method shows the structure of two-channel with rough surface. Finally, the sample was immersed to the phosphoric acid with 0.1 M concentration to etching the barrier layer.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.120-122
• /
• 2005

An alumina membrane with nano-sized pore array by anodic oxidation using thin film aluminum deposited on silicon wafer was fabricated. It is important that the sample prepared by metal deposition method has a flat aluminum surface and a good adhesion between the silicon wafer and the thin film aluminum. The oxidation time was controlled by observation of current variation. While the oxalic acid with 0.2M was used for low voltage anodization under 100V, the chromic acid with 0.1M was used for high voltage anodization over 100V. The nano-sized pores with diameter of 60~120nm was obtained by low voltage anodization of 40~90V and those of 200~300nm was obtained by high voltage anodization of 120~160V. Finally, the sample was immersed to the phosphoric acid with 0.1M concentration to etching the barrier layer. The sample will be applied to electronic sensors, field emission display, and template for nano-structure.

• Journal of the Korean institute of surface engineering
• /
• v.23 no.1
• /
• pp.16-26
• /
• 1990

The standrd electrolyte for the electrodeposition of chromium were preparwith reagent grade chromic acid(200g/L), sulfuric acid(pH=1.8)and oxalic acalic acid(640g/L)as additive. Carbon content in chromium plating varied about2.0-3.8 wt% with current density and temperatures of the bath. The hardeness of chromium platings incresed with increasing the annealing temperatures and showed maximum value of about Hv 1700 after annealing at$ 700^{\circ}C$for 60min. But, decreased it as annealing at above $700^{\circ}C$. The reason for varing thee hardness of chromium codeposited with carbon gradually foumed chromium carbide(Cr7C3), but that changed to Cr23C6 as annealing temperature at above $^700{\circ}C$. The X-ray diffraction pattern indicated that chromium carbides, such as Cr7C3 or Cr3C2, formed at formed at above $300^{\circ}C$. titanium coating sputtered on the on surface of chromium plating had performed and determined the hardness after annealing at 500, 600, $700^{\circ}C$ for 60min. the maximum hardeness was about Hv 2400 as annealing at $700^{\circ}C$. The titanium carbide formed in layer was identified by X-ray diffraction. It was confirmed that chromium and titanium carbide has effect of increasing the hardness.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.7
• /
• pp.1040-1046
• /
• 2006

Studies were carried out with a repeated $4{\times}4$ Latin square design with eight cannulated pigs fed four experimental diets to investigate the effect of dietary fiber and starch sources on apparent ileal and fecal amino acid digestibility. Each period lasted 15 d, with diet acclimation from d 1 to 7, feces collection for 48 h on d 8 to 9 and ileal sample collection for 12 h on d 13 to 15. The four experimental diets consisted mainly of cooked rice with the addition of protein sources (CON), partial replacement of cooked rice with either potato starch (PS), sugar beet pulp (SBP) or wheat bran (WB). Chromic oxide was used as an indigestible marker. With the exception of histidine, lysine and tryptophan, no differences were observed in the apparent ileal digestibility of amino acids between diets. The inclusion of potato starch did not affect the ileal and fecal amino acid digestibility. In comparison with diet CON, a decreased (p<0.05) ileal digestibility of histidine was found in pigs fed diet SBP, while the ileal digestibilities of histidine, lysine and tryptophan were decreased (p<0.05) by the inclusion of wheat bran. Inclusion of fiber sources (sugar beet pulp and wheat bran) caused a reduction (p<0.05) in the fecal amino acid digestibility and the net disappearance of amino acids in the large intestine. Of the indispensable amino acids, there was a 'net synthesis' for methionine in the large intestine of pigs when diets were supplemented with dietary fiber. The decrease in fecal amino acid digestibility with the addition of dietary fiber indicates an increase in the synthesis of bacterial protein in the large intestine.