• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.10
• /
• pp.947-955
• /
• 2010

Most oil and gas reservoirs, which have some light hydrocarbon components, show sensitive phase behavior in response to changes in the composition of the internal fluid. When evaluating and developing plans for oil and gas fields, flash calculation, PVT analysis, and saturation-property calculation are necessary for analyzing reservoir characteristics and pipeline flows. In general, the determination of saturation properties such as dew point and bubble point is considered a difficult task because of the poor convergence of the calculation methods. In this study, several new initial-value-guessing methods and root-finding methods are proposed; parametric analysis were carried out to verify the improvement in convergence. Finally, these new ideas and methods were successfully applied to the new GUI based multi-phase behavior simulator.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.3 no.2
• /
• pp.87-90
• /
• 1998

Hemolymph is oxidized and darkens visibly during the collection from silkworm due to the activity of tyrosinase in it. Toxic quinones are produced by the oxidation and consequently inhibit the cell growth. Heat treatment can be used to prevent the oxidation ; however, the oxidation may occur during the collection of hemolymph before it is heat-treated. It makes the hemolymph collection difficult especially on a large-scale preparation. Hemolymphs collected from 257 different strains of silkworms were examined to select the slowly oxidized hemolymphs. Hemolymphs collected from mutant strains such as Lemone, TBO, Cre, Y4, and wEb showed relatively slow color changes. Oxidation rates of the hemolymphs were measured by the absorbance change using a spectrophotometer. The hemolymph of wEb showed the slowest oxidation. The absorbance of this mutant hemolymph reached the saturation value at 20$^{\circ}C$ in 450 min, whereas the total oxidation time of the wild-type (Baekokjam) hemolymph at the same temperature was 120 min. We tested if this mutant hemolymph is useful as a medium supplement for insect cell culture. Cell growth rate and final cell concentration in the medium supplemented with the wEb hemolymph were almost same as those in the medium supplemented with the wild-type hemolymph. Hemolymph is collected on a small scale by clipping the abdominal leg; however, this method is not appropriate fro large scale preparation. Centrifugation after chopping the silkworm hemolymph by a blending mixer is a more appropriate procedure for large scale collection. Slowly oxidized wEb hemolymph resulted in higher cell concentration than the wild-type hemolymph when hemolymph was collected by the large scale preparation method.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.195.1-195.1
• /
• 2016

Currently, as Plasma application is expanded to the industrial and medical industrial, low temperature plasma applications became important. Especially in medical and biology, many researchers have studied about generated radical species in atmospheric pressure low temperature plasma directly adapted to human body. Therefore, so measurement their plasma parameter is very important work and is widely studied all around world. One of the plasma parameters is electron density and it is closely relative to radical production through the plasma source. some kinds of method to measuring the electron density are Thomson scattering spectroscopy and Millimeter-wave transmission measurement. But most methods have very expensive cost and complex configuration to composed of experiment system. We selected Michelson interferometer system which is very cheap and simple to setting up, so we tried to measuring electron density by laser interferometer with laser beam chopping module for measurement of temporal phase difference in plasma jet. To measuring electron density at atmospheric pressure Ar plasma jet, we obtained the temporal phase shift signal of interferometer. Phase difference of interferometer can occur because of change by refractive index of electron density in plasma jet. The electron density was able to estimate with this phase difference values by using physical formula about refractive index change of external electromagnetic wave in plasma. Our guiding laser used Helium-Neon laser of the centered wavelength of 632 nm. We installed chopper module which can make a 4kHz pulse laser signal at the laser front side. In this experiment, we obtained more exact synchronized phase difference between with and without plasma jet than reported data at last year. Especially, we found the phase difference between time range of discharge current. Electron density is changed from Townsend discharge's electron bombardment, so we observed the phase difference phenomenon and calculated the temporal electron density by using phase shift. In our result, we suggest that the electron density have approximately range between 1014~ 1015 cm-3 in atmospheric pressure Ar plasma jet.

• Journal of Sensor Science and Technology
• /
• v.10 no.5
• /
• pp.279-285
• /
• 2001

The capnograph system for determining the partial pressure of carbon dioxide in the blood of a patient was developed based on the NDIR(non-dispersive infrared) absorption technology. NDIR gas analyzing method requires an optical absorption chamber and signal processing hardware. In this paper, we have designed and implemented NDIR type $CO_2$ gas chamber in consideration of the time response characteristics and lamp chopping frequency. And we have implemented signal processing hardware using two infrared sources to reduce the thermal background effect. The implemented gas chamber and signal processing hardware were tested in the temperature variation experiment and human expiratory experiment. The results showed that the system could produce a stable output signal and a good $CO_2$ gas concentration curve like a typical capnogram.

• Journal of Conservation Science
• /
• v.37 no.5
• /
• pp.579-589
• /
• 2021

Five waterlogged wood artefacts were excavated from Suyeong-ri site in Hwaseong, South Korea. The aim of the present study was to identify the species and estimate the date of manufacture and the manufacturing method of these artefacts. The study also aimed to conserve the original shapes of waterlogged wood artefacts by using the vacuum freeze drying method. The two large waterlogged woods were identified as Ulmus spp. and Morus spp., whereas one of the three small waterlogged woods was identified as Abies spp. and the other two as hard pine. Radiocarbon dating using wiggle match dated the manufacturing of these wooden artefacts between BCE 8520-8490 or BCE 8470-8290 in the Neolithic age, and a similar period was also confirmed for seed excavated from a place close to the location where the waterlogged wood artefacts were excavated. The surface of waterlogged wood artefacts had several traces of manufacturing processes - traces of tearing and chopping - were observed. Based on these observations, it was confirmed that stone adz was used to make these wooden artefacts. Thereafter, the waterlogged wood samples were conserved by immersing them into PEG#4,000 of concentration in water from 10% to 40% at room temperature(15~25℃) and subjecting them to vacuum freeze drying. However, the internal moisture was not completely removed in some thick parts of waterlogged woods by applying the general schedule such as raising the shelf temperature as the surface temperature rises. Therefore, additional study is required using the schedule-method for vacuum freeze drying of large waterlogged wood.

• Journal of Food Hygiene and Safety
• /
• v.24 no.3
• /
• pp.277-284
• /
• 2009

Currently food-borne disease is being increased at outdoor food services including hotels and restaurants. Speedy and convenient practical monitoring techniques to determine hygienic conditions are needed. This study was designed to verify correlation of direct ATP (Adenosine Tri-Phosphate) examination method using ATP bioluminescence and surveillance with check-list by inspector. Hygienic status of personal hygiene (hands), kitchen utensils (knives, chopping boards, kitchen towels, cap openers, food storage containers, and blade of slice machines), facilities and equipments (refrigerator handles, worktables, and sinks) in five major hotels in Seoul were examined. The result of personal hygiene of hotels was relatively better than other inspection items (46.6 points in personal hygiene, 40.2 points in kitchen utensils, 40.3 points in facilities & equipments). In ATP inspection, kitchen utensils and facilities & equipments were relatively clean comparing with personal hands data ($40.8{\pm}6.77\;RLU/cm^2$). After correlation analysis of surveillance in hygienic status points and ATP value, all results showed negative and high correlation. The surveillance data and ATP results investigating personal hygiene, kitchen utensils and facilities & equipments were highly correlated. The ATP examination method which shows real-time identification could be considered as an appropriate method to alternate current check-list dependent safety management in food services including hotels.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.683-688
• /
• 2018

In this study, we analyzed the heat generation state of a flat heating element by using image processing technology in conjunction with carbon fiber. The flat heating element is manufactured by chopping the carbon fiber to a small size and bonding it again using a dispersing agent. The solution of carbon fiber, bound together using the dispersant, is then filtered onto the nonwoven fabric. The last step is to obtain flat carbon fibers in the form of nonwoven fabrics for the purpose of drying the filtered carbon fibers. In the flat heating element, electricity may be applied to the carbon fiber on the surface produced in this manner. In this study, the flat heating element was analyzed by four methods. The analysis of the heat generation characteristics and heating rate of the flat heating element confirmed that the fabricated sheet heating element corresponds to a normal army. The analysis of the insulation coating and flat heating element module, which can be used for actual product manufacturing, involves two dimensional image analysis using image processing technology. The thermal image analysis of the flat heating element is a programming technique that not only analyzes the heat generation state in both two and three dimensions, but also displays the upper and lower 15 to 20% ranges of temperature corresponding to the heat generation in the image. In the final analysis, it is possible to easily find the erroneous part in the manufacturing process by directly showing the state of the fabricated flat heating element on the screen. By combining this image analysis method of the flat heating element with the existing method, we were able to more accurately analyze the heat generation state.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.04a
• /
• pp.43-43
• /
• 2019

Deparia pycnosora (Christ) M. Kato is a fern used as ornamental plant. In addition, it is called "Teol-go-sa-ri" in Korean name. The aim of this study was to develop a practical propagation method of D. pycnosora using tissue culture technique. Prothallus obtained from spore germination was the used as experiment materials. The prothalli (300 mg) used in all experiments were sub-cultured for 8-week intervals. The most suitable media for prothallus propagation were identified by culturing 300 mg of prothalli in $1/4{\times}$, $1/2{\times}$, $1{\times}$, $2{\times}$ MS medium and in Knop medium for 8 weeks. Also, the prothalli were cultured by chopping with a scalpel. In addition, sucrose, activated charcoal, and total nitrogen source were added in different concentrations based on the culture medium selected. Cultures were maintained at a temperature of $25{\pm}1^{\circ}C$, light intensity of $30{\times}1.0{\mu}mol-m-2{\cdot}s-1$, and a photoperiod of 16/8 h (light/dark) in in vitro. The results showed that optimum was achieved prothallus fresh weight and development in $1{\times}$ MS medium. When other components were added to the basic $1{\times}$ MS medium, prothallus propagation was maximized in $1{\times}$ MS medium supplemented with 2% sucrose, 0.2% activated charcoal, and 60 mM total nitrogen. To select a suitable soil mixture for sporophyte formation, 1.0 g of prothallus was blended with distilled water, spread on five combinations of different soil substrates (decomposed granite, horticultural substrates, peat moss, and perlite), and cultivated for 12 weeks. The sporophyte cultures were maintained at a temperature of $25{\pm}1^{\circ}C$, light intensity of $43{\pm}2.0{\mu}mol-m-2{\cdot}s-1$, humidity of $84{\pm}1.4%$, and a photoperiod of 16/8 h (light/dark). As a results, horticultural substrate alone, 2:1 (v:v) mixtures of horticultural substrate and perlite, and 2:1 mixtures of horticultural substrate and decomposed granite induced 208.0, 201.3 and 248.8 sporophytes per pot, respectively. Therefore, this result could provide a practical mass propagation method of D. pycnosora