• 대한치과보철학회지
• /
• 제32권4호
• /
• pp.553-564
• /
• 1994

Using Sirognathograph Analyzing System, the patterns of chewing movement were analyzed into opening phase and closing phase, each phase to frontal plane, horizontal plane, and sagittal plane by maruyama's classification. In opening phase, the chewing patterns of frontal plane were classifed into Chopping Opening, Grinding Opening, Concave Opening, Lateral Shift Opening, Vertical Guide Opening, Convergence Opening. Those of horizontal plane were classified into Chopping Opening, Grinding Opening, Concave Opening, Protrusive Shift Opening, Posterior Guide Opening, Convergence Opening. Those of sagittal plane were classified into Normal Opening, Protrusive Shift Opening, Vertical Guide Opening, Convergence Opening. In closing phase, the chewing patterns of frontal plane were classified into Normal Closure, Concave Closure, Lateral Shift Closure, Lateral Guide Closure, Vertical Guide Closure, Convergence Closure, Those of horzontal plane were classified into Normal Closure, Concave Closure, Lateral Shift Closure, Protrusive Shift Closure, Lateral Guide closure, Posterior Guide Closure, Convergence Closure. Those of sagittal plane were classified into Normal Closure, Protrusive Shift Closure, Vertical Guide. Closure, Convergence Closure. Results were summarized as follows : 1. Opening phase in chewing movement The Normal Openings in 3 planes(frontal, horizontal, sagittal), the Concave Openings in frontal plane and horizontal plane, the Vertical Guide Opening in frontal plane and the Posterior Guide Opening in horizontal plane were many observed. 2. Closing phase in chewing movement The Concave Closure in frontal and horizontal plane, the Normal Closure in 3 planes (frontal, horizontal, sagittal), the Concave Closure in horizontal plane were many observed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1705-1707
• /
• 2005

This paper proposes a novel active frequency drift(AFD) method for the islanding prevention of grid-connected photovoltaic inverter. To detect the islanding phenomenon of grid-connected photovoltaic(PV) inverters concerning about the safety hazards and the damage to other electric equipments, many kinds of anti-islanding methods have been presented. Among them, AFD method using chopping fraction(cf) enables the islanding detection to drift up(or down) the frequency of the voltage during the islanding situation. However, the performance of the conventional AFD methods, which have a certain value of cf only, is inefficient and difficult to design the appropriate cf value analytically to meet the limit of harmonics. In this paper, the periodic chopping fraction based on an AFD method is proposed. This proposed method shows the analytical design value of cf to meet the test procedure of IEEE Std. 929-2000 with the power quality and islanding detection time. To verify the validation of the proposed method, the islanding test results are presented. It is confirmed that the proposed method has not only less harmonic distortion but also good performance of islanding detection compare with the conventional AFD method.

• Asian-Australasian Journal of Animal Sciences
• /
• 제23권12호
• /
• pp.1601-1607
• /
• 2010

Two experiments were carried out to investigate i) the effects of four levels of lactic acid bacteria inoculants (LAB; 0, $2{\times}10^5$, $3{\times}10^5$ and $4{\times}10^5$ cfu/g fresh forage) and two physical forms of rice straw (whole and chopped rice straw) on silage fermentation quality and nutritive value of rice straw (RS) silage for lactating Holsteins and ii) the effects of the replacement of corn silage (CS) with different inclusion levels (0, 25 and 50%) of LAB treated RS on lactating performance of Holstein dairy cows. Rice straw packed with stretch film was ensiled for 45 d. The results showed that the higher level of LAB inoculants in the silage quadratically decreased pH, $NH_3$-N and acetic acid concentrations and increased the contents of lactic acid and total organic acids. The CP content and DM losses in the silage declined linearly as the level of LAB addition was increased. Compared with whole-plant rice straw silage (WRS), chopped rice straw silage (CRS) dramatically reduced pH by 0.83. The concentrations of $NH_3$-N were similar in WRS and CRS and both were less than 50 g/kg of total N. Chopping rice straw before ensiling significantly enhanced the lactic acid concentration and total organic acids content whereas the concentration of acetic acid declined. The CP, NDF and ADF content of CRS was 13.4, 5.9 and 10.2% lower than in WRS, respectively. Except for butyric acid concentration, significant interaction effects of inoculation level and physical form of RS were found on all fermentation end-products. Our findings indicated that milk yield and composition were not affected by different level of RS inclusion. However, because of the lower cost of WRS, cows consuming a ration in which WRS was partially substituted for CS had 3.48 Yuan (75% CS+25% WRS) and 4.56 Yuan (50% CS+50% WRS) more economic benefit over those fed a CS-based ration. It was concluded that the chopping process and LAB addition could improve the silage quality, and that substitution of corn silage with RS silage lowered the cost of the dairy cow ration without impairing lactation performance.

• 한국산학기술학회논문지
• /
• 제21권10호
• /
• pp.1-7
• /
• 2020

최근 LED 디스플레이 시스템이 활발히 보급됨에 따라서 시스템 구동을 위한 LED 드라이버의 효과적인 제어방법에 대한 연구가 진행 중이다. 그 중에 가장 대표적인 것이 LED Driver 채널의 균일한 밝기 제어이다. 본 논문 에서는 채널 휘도 편차 최소화를 위한 전류보상 및 시스템 보호 기능을 갖는 BLU용 LED driver IC를 제안하였다. 제안하는 LED Driver IC는 채널 간 ±3% 이내의 current accuracy와 150mA 채널 전류를 목표로 설계하였다. 설계 사양을 만족시키기 위해 채널 구동 PWM 신호를 이용한 chopping 동작을 수행하도록 하여 채널 앰프 옵셋을 상쇄할 수 있도록 하였다. 또한 pre-charge기능을 구현하여 빠른 동작 속도와 채널간 휘도 편차를 최소화할 수 있도록 하였다. LED에러(오픈, 쇼트), 스위치 TR 쇼트 감지 및 동작 온도 보호 회로를 설계하여 IC 및 BLU시스템을 보호할 수 있도록 하였다. 제안된 IC는 Cadence 및 Synopsys사의 Design Tool을 사용하여 설계 하였으며, Magnachip 0.35um CMOS 공정을 사용하여 제작되었다. 제작된 LED driver IC는 채널 간 ±1.5% 이내의 current accuracy와 150mA 채널 출력특성을 만족하였으며, 평가 보드를 통해 에러 검출 회로들이 정상 동작함을 확인하였다.

• Journal of Biosystems Engineering
• /
• 제1권1호
• /
• pp.55-55
• /
• 1976

An experimental work was conducted to develop an optimum operating system of various hay drying systems ; sun-drying with long hay, sun-drying after chopping, sun-drying after crushing, heated air drying after chopping using batch-type dryer and heated air drying after crushing using tunnel-type dryer. Seombody having 60 cm long and initial moisture content of approximately 79 % in wet basis was used for the experiment. The criteria selected for determining the optimum operating condition were the drying performance rate, the production cost and quality of dried matter of each drying systems. The result of this study are summarized as follows : 1. Drying characteristics of leaves of long stem hay, chopped seombody and crushed one were obtained by maintaining the oven temperature at 70 degrees centigrade. The required drying times for various samples to approximately 15% moisture content in wet basis were about 50 min .for leaves ; 160 min. for crushed hay ; 250 min. for chopped hay ; 340min. for ling hay and more than 360 min .for stems. The drying time of crushed hay was required about 50 % of that for the uncrushed long hay. Such a significant difference of drying of time between the leaf and long stem may indicate that an effective drying of seombody may not be achieved unless any kind of special process treatment for the whole hay is undertaken. 2. In each individual drying system, the following conclusions were drawn: a. After 8 days sun-drying on concrete floor under good days with average tempe?rature at $256{\circ}C$ and relative humidity at 55% at 2 P.M., the moisture content of long hay was still above 25 5'~ and the leaf loss during drying caused by wind and rough handling was more than 50 ~G. b. It was possible to dry the chopped seombody by sun-drying down to about 10 % moisture content within 5 days, however, a stock of heat and discolouration phenomena were observed during the drying, which may be due to the increased deposit-density by chopping, resulting in lowering the quality of the dried product. c. Sun-drying for the crushed material by hay-conditioner was required about 4 days to reduce the moisture content to about 10 %, keeping the quality of dried product at good grade. o. The optimum deposit-depth of the chopped seombody in the batch-type dryer used was about 28cm with about 42kg/hr of drying performance rate. However, it was necessary to overturn the materials between the upper and lower layers in order to obtain a good quality of dried product. d. The drying performance rate by the tunnel-type drier was highest among those of drying systems tested, giving the rate of approximately 400kg/day. 3. On reviewing the individual drying system for seombody, it was possible to draw conclusion that the best system was tunnel drying with the crushed seombody as far as the performance rate was concerned. However, the methods gives the highest operational cost. The system for the lowest operational cost with good quality of dried product was the sun-drying with the crushed material. Accordingly, it may be recommended that the system of sun-drying for the crushed seombody may be the most feasible system presently applicable to farm-level operation.

• Journal of Biosystems Engineering
• /
• 제1권1호
• /
• pp.56-63
• /
• 1976

An experimental work was conducted to develop an optimum operating system of various hay drying systems ; sun-drying with long hay, sun-drying after chopping, sun-drying after crushing, heated air drying after chopping using batch-type dryer and heated air drying after crushing using tunnel-type dryer. Seombody having 60 cm long and initial moisture content of approximately 79 % in wet basis was used for the experiment. The criteria selected for determining the optimum operating condition were the drying performance rate, the production cost and quality of dried matter of each drying systems. The result of this study are summarized as follows : 1. Drying characteristics of leaves of long stem hay, chopped seombody and crushed one were obtained by maintaining the oven temperature at 70 degrees centigrade. The required drying times for various samples to approximately 15% moisture content in wet basis were about 50 min .for leaves ; 160 min. for crushed hay ; 250 min. for chopped hay ; 340min. for ling hay and more than 360 min .for stems. The drying time of crushed hay was required about 50 % of that for the uncrushed long hay. Such a significant difference of drying of time between the leaf and long stem may indicate that an effective drying of seombody may not be achieved unless any kind of special process treatment for the whole hay is undertaken. 2. In each individual drying system, the following conclusions were drawn: a. After 8 days sun-drying on concrete floor under good days with average tempe\ulcornerrature at $256{\circ}C$ and relative humidity at 55% at 2 P.M., the moisture content of long hay was still above 25 5'~ and the leaf loss during drying caused by wind and rough handling was more than 50 ~G. b. It was possible to dry the chopped seombody by sun-drying down to about 10 % moisture content within 5 days, however, a stock of heat and discolouration phenomena were observed during the drying, which may be due to the increased deposit-density by chopping, resulting in lowering the quality of the dried product. c. Sun-drying for the crushed material by hay-conditioner was required about 4 days to reduce the moisture content to about 10 %, keeping the quality of dried product at good grade. o. The optimum deposit-depth of the chopped seombody in the batch-type dryer used was about 28cm with about 42kg/hr of drying performance rate. However, it was necessary to overturn the materials between the upper and lower layers in order to obtain a good quality of dried product. d. The drying performance rate by the tunnel-type drier was highest among those of drying systems tested, giving the rate of approximately 400kg/day. 3. On reviewing the individual drying system for seombody, it was possible to draw conclusion that the best system was tunnel drying with the crushed seombody as far as the performance rate was concerned. However, the methods gives the highest operational cost. The system for the lowest operational cost with good quality of dried product was the sun-drying with the crushed material. Accordingly, it may be recommended that the system of sun-drying for the crushed seombody may be the most feasible system presently applicable to farm-level operation.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.525-528
• /
• 2000

This paper presents a circuit analysis and cotnrol example of favored configuration 6/4 SRM. SRM modeling and analysis are necessary for experiment. Thus this paper proposes a SRM modeling with PI controller (of driving converter) input voltage chopping and inductance profile when rotor position transformed. Through this simulation the designer can predict operating states of systems over a broad range of operating conditions.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2009년도 정기총회 및 추계학술대회 논문집
• /
• pp.188-190
• /
• 2009

본 연구에서는 독립운전 검출기법의 능동적 기법 중 AFDPF 기법을 IEEE Std 929-2000에 제시된 독립운전 시험 조건하에서 위상동기기법 영점검출방식(Zero Crossing PLL)을 적용하여 독립운전 시 chopping fraction에 따른 PCC(Point of Common Coupling)의 주파수 변동 특성을 PSIM을 통하여 분석하였다

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 전문대학교육위원
• /
• pp.84-87
• /
• 2004

The Attractive features of the proposed converter has lower number of power devices and also has full regenerative capability, freewheeling in chopping or PWM mode, simple control strategy and faster demagnetization during commutation. The dump component energy requirements are much lower in this converter topology than another C-dump converters. As a result, The proposed converter has improved efficiency in the overall system than Modified C-dump converter, this thesis was approved its superiority by simulation and experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.69-72
• /
• 1988

The work is concerned with the analysis of the voltage escalation caused by the repeated restriking and extinguishing of the current when the vacuum circuit breaker interrupts the arc furnace load current. The paper particularly concentrates on the protective measures that may be adopted to overcome the restriking problem and guidelines are evaluated.