• 한국재료학회지
• /
• 제31권5호
• /
• pp.264-271
• /
• 2021

Porous carbons have been widely used as electrode material for supercapacitors. However, commercial porous carbons, such as activated carbons, have low electrochemical performance. Nitrogen-doping is one of the most promising strategies to improve electrochemical performance of porous carbons. In this study, nitrogen self-doped porous carbon (NPC) is prepared from melamine foam by carbonization to improve the supercapacitive performance. The prepared NPC is characterized in terms of the chemical structures and elements, morphology, pore structures, and electrochemical performance. The results of the N₂ physisorption measurement, X-ray diffraction, and Raman analyses reveal that the prepared NPC has bimodal pore structures and pseudo-graphite structures with nitrogen functionality. The NPC-based electrode exhibits a gravimetric capacitance of 153 F g^-1 at 1 A g^-1, a rate capability of 73.2 % at 10 A g^-1, and an outstanding cycling ability of 97.85 % after 10,000 cycles at 10 A g^-1. Thus, the NPC prepared in this study can be applied as electrode material for high-performance supercapacitors.

• Journal of Applied Biological Chemistry
• /
• 제66권
• /
• pp.67-72
• /
• 2023

A simple and accurate method was developed for the quantitative analysis of oleanonic acid (OA) from mastic gum. The analysis was carried out using reverse-phase high-performance liquid chromatography combined with a photodiode array detector (HPLC/PDA). Our optimized method was validated by measuring various parameters, using an INNO C18 column fitted with a gradient elution system. The results revealed limits of detection and quantification of 0.34 and 1.042 ㎍/mL, respectively. The OA calibration curve exhibited excellent linearity over the concentration range of 0.0625 to 2.0 mg/mL, with r² =0.9996. Accuracy tests revealed a high recovery rate of 99.44-103.66%, with precision values below 0.15%. These results suggest that the present analytical method can identify and quantify OA in mastic gum with high precision. The HPLC approach developed in this study might be applied to routine analyses and large-scale extraction procedures for OA content quantification.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.87-92
• /
• 2000

In excavation of tunnels especially located in shallow depth, it is not rare to meet geological change in excavation progress worse than expected in the initial design stage. This paper present a case study on the re-design of excavation and support system of a shallow tunnel under construction where it meets the unexpected bad geological condition during excavation. The detailed geological investigation shows that the rock mass is heavily weathered and fractured with RMR value less than 20. Considering this geological condition, the design concept is focused on the reinforcement of the ground preceding the excavation of tunnel. Two design patterns, LW-grouting & forepoling with pilot tunnelling method and the steel pipe reinforced grouting method, are suggested. Numerical analysis by FLAC shows that these two patterns give the tunnel and roof ground stable in excavation process while the original design causes severe failure zone around the tunnel and floor heaving. In point of the mechanical stability and the degree of construction, the steel pipe reinforced grouting technique proved to be good for the reinforcement of heavily fractured rock mass in tunnelling. This assessment and design process would be a guide in the construction of tunnels in heavily weathered and fractured rock mass situation.

• Food Science and Biotechnology
• /
• 제18권4호
• /
• pp.855-860
• /
• 2009

Physicochemical properties of starches isolated from 3 new potato cultivars developed by Potato Valley Ltd. were investigated and compared to those of starch isolated from 'Superior' being distributed prominently in Korea. Significant differences were observed in physicochemical properties such as granule size, amylose content, phosphorus content, water binding capacity, swelling power, solubility, and in vitro digestibility of starches from different potato cultivars. Thermal properties were evaluated using differential scanning calorimetry (DSC), and onset gelatinization temperatire ($T_o$), peak temperature ($T_p$), and enthalpies of gelatinization (${\triangle}H$) of different potato cultivars ranged as $58.0{\pm}0.3-61.7{\pm}0.4^{\circ}C,\;63.7{\pm}0.2-$ $66.5{\pm}0.0^{\circ}C$, and $15.6{\pm}0.5-17.0{\pm}0.3$ J/g, respectively. Pasting properties were evaluated using a rapid visco analyzer (RVA), and pasting temperature, peak viscosity, and final viscosity of different potato cultivars ranged as $65.0{\pm}0.1-68.9{\pm}0.1^{\circ}C$, $8,163.7{\pm}196.3-9,035.7{\pm}6.4$ cp, and $4,397.7{\pm}166.7-7,025.0{\pm}271.3$ cp, respectively. Especially, 'Gogu valley' starch showed the highest values in the amylose and phosphorus content among tested potato cultivars and higher water binding capacity, swelling power, and solubility than those of other tested starches. And it also showed high pasting temperature, peak viscosity, trough viscosity, and final viscosity as compared to other tested starches.

• Clinical and Experimental Pediatrics
• /
• 제46권6호
• /
• pp.597-601
• /
• 2003

저자들은 저출생 체중과 호흡 곤란을 주소로 출생 직후 이송 된 여아에서, 진찰상 안면과 골격계 기형 소견 보여 말초 혈액에서 시행한 염색체 핵형 검사에서 trisomy 9, low level mosaic type으로 진단되었던 1례를 경험하였기에 보고하는 바이다.

• 기술혁신학회지
• /
• 제11권4호
• /
• pp.613-638
• /
• 2008

2005년 '국가연구개발사업 등의 성과평가 및 성과관리에 관한 법률'이 제정되고, 이를 수행하기 위한 '연구성과관리활용기본계획(안)'이 수립되면서 연구개발성과관리 및 활용 그리고 이에 대한 체계적인 관리가 본격화되고 있다. 본 연구는 관련 법령과'연구성과관리활용기본계획(안)'의 기본 목적에 부합하면서 성과 활용가능성이 크게 요구되고 있는 산업기술분야의 국가연구개발 성과확산을 촉진할 수 있는 추적평가관리체계 모형과 본 모형을 현행 연구기관평가체계와 양립할 수 있는 세 가지 적용방안을 제안한다. 특히, 국가 연구개발사업 및 과제의 성과에 대한 체계적이고 합리적인 추적평가를 위하여 AHP 및 DEA 등 계량적 방법론을 활용 상대 평가할 수 있는 방안을 제시한다.

• Journal of Microbiology and Biotechnology
• /
• 제27권5호
• /
• pp.947-955
• /
• 2017

Herbicidin A is a potent herbicide against dicotyledonous plants as well as an antibiotic against phytopathogens. In this study, fermentation parameters for herbicidin A production in submerged culture of Streptomyces scopuliridis M40 were investigated. The herbicidin A concentration varied with the C/N ratio. High C/N ratios (>4) resulted in a herbicidin A production of more than 900 mg/l, whereas maximally 600 mg/l was obtained at ratios between 1 and 3.5. In 5-L batch fermentation, there was a positive correlation between the oxygen uptake rate (OUR) and herbicidin A production. Once the OUR increased, the substrate consumption rate increased, leading to an increase in volumetric productivity. Mechanical shear force affected the hyphal morphology and OUR. When the medium value of hyphal size ranged from 150 to $180{\mu}m$, high volumetric production of herbicidin A was obtained with OUR values >137mg $O_2/l{\cdot}h$. The highest herbicidin A concentration of 956.6 mg/l was obtained at 500 rpm, and coincided with the highest relative abundance of hyphae of $100-200{\mu}m$ length and the highest OUR during cultivation. Based on a constant impeller tip speed, which affects hyphal morphology, herbicidin A production was successfully scaled up from a 5-L jar to a 500-L pilot vessel.

• 한국수소및신에너지학회논문집
• /
• 제7권2호
• /
• pp.157-164
• /
• 1996

The AB5-type metal hydride electrodes using $(LM)Ni_{4.49}Co_{0.1}Mn_{0.205}Al_{0.205}$(LM : Lanthaniumrich Mischmetal) alloy powders(${\leq}200$mesh) which were coated with 25wt% copper in an acidic bath were prepared with or without addition of 10wt% PTFE as a binder. Prior to electrochemical measurements, the electrodes were sintered at $40^{\circ}C$ for 1 and 2hrs in vacuum with Mm(mischmetal) and sponge type Ti getters. The properties such as maximum capacity, cycle life and mechanical strength of the negative electrode have been investigated. The surface analysis of the electrode was also obtained before and after charge-discharge cycling using scanning electron microscope(SEM). From the observations of electrochemical behavior, it was found that the sintered electrode shows a lower maximum discharge capacity compared with non-sintered electrode but it shows a better cycle life. For the both electrodes with or without addition of PTFE binder, the values of mechanical strength were obtained, and their values increased with increasing sintering time. However, there is little difference of discharge capacity for both electrodes.

• Journal of Korean Neurosurgical Society
• /
• 제48권5호
• /
• pp.406-411
• /
• 2010

Objective : Esophageal/hypopharyngeal injury can be a disastrous complication of anterior cervical surgery. The amount of hypopharyngeal wall exposure within the surgical field has not been studied. The objective of this study is to evaluate the chance of hypopharyngeal wall exposure by measuring the amount of axial rotation of the thyroid cartilage (ARTC) and posterior projection of the hypopharynx (PPH). Methods : The study was prospectively designed using intraoperative ultrasonography. We measured the amount of ARTC in 27 cases. The amount of posterior projection of the hypopharynx (PPH) also was measured on pre-operative CT and compared at three different levels; the superior border of the thyroid cartilage (SBTC), cricoarytenoid joint and tip of inferior horn of the thyroid cartilage (TIHTC). The presence of air density was also checked on the same levels. Results : The angle of ARTC ranged from $-6.9^{\circ}$ to $29.7^{\circ}$, with no statistical difference between the upper and lower cervical group. The amount of PPH was increased caudally. Air densities were observed in 26 cases at the SBTC, but none at the TIHTC. Conclusion : Within the confines of the thyroid cartilage, surgeons are required to pay more attention to the status of hypopharynx/esophagus near the inferior horn of the thyroid cartilage. The hypopharynx/esophagus at the TIHTC is more likely to be exposed than at the upper and middle part of the thyroid cartilage, which may increase the risk of injury by pressure. Surgeons should be aware of the fact that the visceral component at C6-T1 surgeries also rotates as much as when the thyroid cartilage is engaged with a retractor. The esophagus at lower cervical levels warrants more careful retraction because it is not protected by the thyroid cartilage.

• Journal of Korean Neurosurgical Society
• /
• 제46권3호
• /
• pp.181-188
• /
• 2009

Objective : To evaluate the anatomical parameters that must be considered when performing thoracic transpedicular or extrapedicular screw fixation. Methods : We selected 958 vertebrae (1,916 pedicles) from 98 patients for analysis. Eight parameters were measured from CT scans : the transverse outer pedicular diameter, transverse inner pedicular diameter, length, angle, chord length of the pedicles and the transverse width, angle, and chord length of the pedicle-rib units. Results : The age of the patients ranged from 21 to 82 years (mean: 48.2 years) and there were 57 men and 41 women. The narrowest transverse outer pedicular diameter was at T5 (4.4 mm). The narrowest pedicle length was at T1 (15.9 mm). For pedicle angle, T1 was 31.6 degrees, which was the most convergent angle, and it showed the tendency of the lower the level, the lesser the convergent angle. The chord length showed a horizontal pattern with similar values at all levels. For the PRU width, T5 showed a similar pattern to the pedicle width at 13.4 mm. For the PRU angle, T1 was the largest angle at 46.2 degrees and the tendency was the lower the level. the narrower the angle. For chord length, T1 was the shortest at 46.9 mm and T8 was the longest at 60.1 mm. Conclusion : When transpedicular screw fixations carried out at the mid-thoracic level, special care must be taken because there is a high chance of danger of medial wall violation. In these circumstances, extrapedicular screw fixation may be considered as an alternative treatment.