• 대한기계학회논문집B
• /
• 제21권2호
• /
• pp.264-274
• /
• 1997

A numerical analysis on condensation and coagulation of the metallic species with fly ash particles pre-existing in an incinerator was performed. Waste was simplified as a mixture of methane, chlorine, and small amounts of Pb and Sn. Vapor-phase amounts of Pb- and Sn -compounds were first calculated assuming a thermodynamic equilibrium state. Then theories on vapor-to-particle conversion, vapor condensation onto the fly ash particles, and particle-particle interaction were examined and incorporated into equations of aerosol dynamics and vapor continuity. It was assumed that the particles followed a log-normal size distribution and thus a moment model was developed in order to predict the particle concentration and the particle size distribution simultaneously. Distributions of metallic vapor concentration (or vapor pressure) were also obtained. Temperature drop rate of combustion gas, fly ash concentration and its size were selected as parameters influencing the discharged amount of metallic species. In general, the coagulation between the newly formed metal particles and the fly ash particles was much greater than that between the metal particles themselves or between the fly ash particles themselves. It was also found that the amount of metallic species discharged into the atmosphere was increased due to coagulation. While most of PbO vapors produced from the combustion were eliminated due to combined effect of condensation and coagulation, the highly volatile species, PbCl$_{2}$ and SnCl$_{4}$ vapors tended to discharge into the atmosphere without experiencing either the condensation or the coagulation. For Sn vapors the tendency was between that of PbO vapors and that of PbCl$_{2}$ or SnCl$_{4}$. To restrain the discharged amount of hazardous metallic species, the coagulation should be restrained, the number concentration and the size of pre-existing fly ash particles should be increased, and the temperature drop rate of combustion gas should be kept low.

• Journal of Photoscience
• /
• 제12권2호
• /
• pp.101-107
• /
• 2005

Infrared multiphoton dissociation of $CHCl_2F$ was studied using $CO_2$ laser excitation. Three products, $C_2Cl_2F_2$, $C_2ClF_3$, and $C_2HClF_2$, were identified by the analysis of the gas mixture from the photoreaction of $CHCl_2F$. The dependence of the reaction probability on added Ar gas pressure and excitation laser pulse energy was investigated. At low pressure (< 10 torr), the reaction probability increased as Ar pressure increased due to the rotational hole-filling effect, while it diminished with the increase of Ar pressure at high pressure (> > 20 torr) due to the collisional deactivation. The ratio of two products $(C_2ClF_3/C_2Cl_2F_2)$ decreased at low pressure (< 10 torr) and increased at high pressure (> 20 torr) with the increase of Ar pressure. The log-log plot of the reaction probability vs. laser pulse energy (${\\phi}$) was found to have a linear relationship, and its slope decreased as the added Ar pressure was increased. The reaction mechanisms for product formation have been suggested and validated by experimental evidences and considering the energetics. Fluorine-chlorine exchange reaction in the intermediate complex has been suggested to explain the formation of $C_2ClF_3$.

• 멤브레인
• /
• 제26권6호
• /
• pp.458-462
• /
• 2016

염수전기분해(saline water electrolysis) 또는 클로로-알칼리 막공정(chlor-alkali membrane process)은 양이온교환막과 전극으로 구성되는 전해셀에 전기를 가하여, 고순도(> 99%)의 고부가가치 화합물(예 : 염소, 수소, 수산화나트륨)을 직접 제조하는 화학공정이다. 염수전기분해의 경제성은 동일한 양의 화합물을 생산하기 위해 투여되는 에너지 소비량을 저감시킴으로 달성될 수 있다. 이러한 이슈는 전해질이나 전극의 고유 저항을 줄이거나, 전해질과 전극 사이의 계면 저항을 감소시킴으로 달성시킬 수 있다. 본 연구에서는 전자빔 동시조사법을 사용하여, 높은 화학적 안정성을 지닌 탄화수소계 술폰산 이오노머 막의 표면에 높은 이온선택성을 갖는 고분자를 접목 시키는 시도가 이루어졌다. 이를 통해, 고분자 전해질 막의 이온전도성을 보완함과 동시에, 전극과의 계면 저항을 감소시켜, 전기화학적 효율 향상이 이루어짐을 관찰하였다.

• Membrane and Water Treatment
• /
• 제11권2호
• /
• pp.141-149
• /
• 2020

Prechlorination could increase the removal efficiency of Synedra, but there was no significant effect of increasing the amount of chlorine added. However, a removal efficiency of greater than 80% was noted when ozone was injected at concentrations greater than 2 mg/L. Also, it was found that on addition of polyamine, a removal efficiency of 80% or more could be achieved. As a result of the analysis of field operation data from the water treatment plants G and B, it was found that at water treatment plant G, the filter run time decreased to 10 hours or less when only coagulant was injected, but the filter run time increased to around 40 hours when polyamine (3 mg/L) was also injected. The Synedra population in the raw water subsequently increased to 2,340 cells/mL, and the filter continued running for more than 20 hours. At water treatment plant B, the average Synedra removal efficiency was 56% when only coagulant was injected, and the filter run time decreased drastically with the increasing population of Synedra in the raw water. However, the removal efficiency of Synedra reached 79% when polyamine was injected together with the coagulant, 90% when ozone was also injected, and 95% when polyamine and ozone were injected together and the filter continued running for over 50 hours. The filter run time was maintained at 60 hours when a Synedra population of 6,890 cells/mL flowed into the Paldang water source, but the filter run time with Synedra at 1,960 cells/mL decreased rapidly from 65 hours to 35 hours when the ratio of the size of the individual Synedra reaching 250 ㎛ or more, increased from 38% to 94%. Therefore, the size of the Synedra is considered to be a factor that significantly influences filter clogging, as well as the size of the Synedra population.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 추계학술발표논문집
• /
• pp.194-204
• /
• 1999

The use of genetically cloned xylanase acquired from Bacillus strearthermophillus improves bleachability for oak kraft pulps. Combination of xylanase(X). oxygen(O), ozone(Z). peroxide(P), alkaline extraction(Eo. Eop), and chlorination(C/D, D) have been tested in a variety of bleaching sequences. The effectiveness of xylanase pre-treatment(XO) and post-treatment(OX) in oxygen bleaching is mainly compared. With xylanase treatment the brightness increase by 1.5-2.1% ISO in OZEP, OZEoP, OZEopP and OPZP sequences. There is only numerically difference of brightness gains between OX and XO sequences. With xylanase treatment chemical requirements for bleaching decrease by 42.6-48.6% in OC/DEoD sequence and 47.9-54.7% as active chlorine in OC/DEopD sequence at the same brightness. the reduction of bleaching chemicals is higher in XO sequence than those in OX sequence. Following xylanase treatment the viscosity increases from 11.7-12.0 mPa·s to 12.4-13.5 mPa·s and the brightness stability is considerably improved however the difference of effectiveness between XO and OX sequence is not present. Compared to tensile index vs tear index, the physical properties are similar for TCF bleaching sequences with and without xylanase treatments. However in OC/DEoD and OC/DEopD sequences the physical properties decrease with xylanase treatment. There is no difference in the physical properties between XO and OX sequences. COD, BOD and color of bleaching effluents increase slightly with xylanase treatment, however the discharge of COD end-load into environmental impact decrease.

• 한국환경과학회지
• /
• 제26권9호
• /
• pp.1081-1086
• /
• 2017

The present study was conducted for the purpose of analyzing the growth response of Dracaena braunii treated with chloride ions and to evaluate its salt tolerance. Distilled water (CON) was spiked with 1 (C1), 2 (C2), 5 (C5), 10 (C10) and 15 g/L (C15) $CaCl_2$, respectively. Acidity (pH) and electrical conductivity of hydroponic solution, and leaf width, leaf length, root length, number of leaves, fresh weight, dry weight and the water content of Dracaena braunii were measured. Acidity and electrical conductivity remarkably increased commensurate with increasing concentrations of $CaCl_2$. Growth in the C1 treatment was better than that in CON, whereas the C10 or C15 treatments caused either slow growth or withering of the plants. Fresh weight, dry weight and water content were significantly decreased in response to $CaCl_2$ concentration, compared with those in the control. These results showed that $CaCl_2$ concentration less than 1 g/L may be used as a hydroponic solution for D. braunii, as long as the water quality is not too saline. The chlorine ion has a negative effect on the growth.

• Transactions on Electrical and Electronic Materials
• /
• 제9권1호
• /
• pp.6-11
• /
• 2008

In this study, we investigated effects of hydrogen annealing (HA) and plasma nitridation (PN) applied in order to improve $Si/SiO_2$ interface characteristics of TiN metal gate. In result, HA and PN showed a positive effect decreasing number of interface state $(N_{it})$ respectively. After FN stress for verifying reliability, however, we identified rapid increase of $N_{it}$ for TiN gate with HA, which is attributed to hydrogen related to a change of $Si/SiO_2$ interface characteristic. In contrast to HA, PN showed an improved Nit and gate oxide leakage characteristic due to several possible effects, such as blocking of Chlorine (Cl) diffusion and prevention of thermal reaction between TiN and $SiO_2$.

• 한국응용과학기술학회지
• /
• 제24권4호
• /
• pp.319-331
• /
• 2007

The aim of this study is to enhance the flame retardancy by the synergism effect of phosphorus and bromine groups. The flame-retardant polyurethane coatings containing phosphorus and bromine compounds were synthesized. After synthesizing the intermediate products of tetramethylene bis(orthophosphate) (TBOP) and trimethylolpropane/2,3-dibromopropionic acid (2,3-DBP) [2,3-DBP-adduct], the condensation polymerization was performed with four different monomers of two intermediate products, 1,4-butanediol, and adipic acid to obtain four-components copolymer. In the condensation polymerization, the content of phosphorus was fixed to be 2wt%, and the content of 2,3-DBP that provides bromine component was varied to be 10, 20, and 30wt%, and we designated the prepared modified polyesters containing phosphorus and bromine as DTBA-10C, -20C, -30C. Average molecular weight and polydispersity index of the preparation of DTBAs were decreased with increasing 2,3-DBP content because of increase of hydroxyl group that retards reaction. We found that the thermal stability of the prepared DTBAs increased with bromine content at high temperature.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2000년도 추계학술대회
• /
• pp.232-236
• /
• 2000

Multi-regression statistical analyses were applied for the water quality data of shallow alluvial ground water (n = 47) collected from the Youngdeok area, in order to quantitatively generalize the natural (non-anthropogenic) causes of regional water quality variation. Seven samples having the high contamination index ( $C_{a}$ > 3) reflect the striong effects by anthropogenic activity. Most of the alluvial groundwaters have acquired their quality primarily due to the dissolution of carbonate minerals. The results of multi-regression analysis show that chlorine is mainly derived from seawater effect. Sulfur isotopic compositions of dissolved sulfur and the S $O_4$/Cl ratio also enable us to discriminate the samples (n = 18) which are affected by atmospheric input of marine aerosol (sea-spray) and also by mixing between freshwater and seawater. Hydrogen and oxygen isotope data of the samples collected lie close to the local meteoric water line obtained from nearby Pohang city but has lower slope (5.45) on the $\delta$D-$^{18}$ O plot, indicating that alluvial groundwater was recharged from infiltrated meteoric water which has undergone some degree of kinetic evaporation. The estimated initial isotopic composition of the recharged water ($\delta$D = -74.8$^{0}$ /$_{00}$, $\delta$$^{18}$ O = -10.8$^{[-1000]}$ /$_{[-1000]}$ ) suggests that the alluvial ground water recharge largely occurs during summer storm events.s.s.

• 공업화학
• /
• 제4권2호
• /
• pp.318-323
• /
• 1993

CFC-11$(CFCl_3)$의 대체품인 HCFC-123$(CF_3CHCl_2)$의 합성을 위하여 Pentachloroethane($CHCl_2CCl_3$)을 제조하고, 이것을 antimony pentahalide 촉매의 존재하에서 불화수소와 반응시켰다. $CHCl_2CCl_3$의 불소화 반응은 촉매와 반응물간의 Cl-F교환 mechanism에 의해 진행되었으며 $CHCl_2CCl_3$의 불화도는 반응온도가 높을수록 증가하는 경향을 보여 주었다. 촉매농도 또한 생성물의 불화도에 영향을 미치나 반응온도에 비해 상대적으로 낮았다. $CCl_3CFCl_2$, $CFCl_2CFCl_2$, $CF_2ClCFCl_2$와 같은 부산물의 생성원인을 규명하기 위한 실험을 실시하여 부산물 생성 mechanism을 제안하였다.