• 한국유기농업학회지
• /
• 제8권2호
• /
• pp.89-96
• /
• 2000

To reduce loss of nitrogen and generation of ammonia gas during composting, poultry manure and sawdust were mixed at the equivalent ratio and calcium chloride, fused superphosphate and vermiculite were added. Ammonia and sulfurous gas during composting, and NH4-N and NO3-N contents of composts were periodically measured. With the treatments of 0.5∼3% calcium chloride and 3% fused superphosphate, ammonia and sulfurous gas during composting significantly decreased, and especially generation of gases sharply reduced and a increase of calcium chlorde. Extractable NH4-N content in composts treasted with calcium chloride and fused superphosphate were high but extractable NO3-N markedly decreased. In conclusion, the results suggest that it is necessary the additon of 1∼3% calcium chloride or 3% fused superphosphate to reduce loss of nirogen and generation of offensive odor during composting of poultry manure mixed with sawdust.

• Safety and Health at Work
• /
• 제1권1호
• /
• pp.98-101
• /
• 2010

This study explored the health hazard of those exposed to methylene chloride by assessing its atmospheric concentration when a tear gas mixture was aerially dispersed. The concentration of methylene chloride ranged from 311.1-980.3 ppm (geometric mean, 555.8 ppm), 30 seconds after the dispersion started. However, the concentration fell rapidly to below 10 ppm after dispersion was completed. The concentration during the dispersion did not surpass the National Institute for Occupational Safety and Health 'immediately dangerous to life or health' value of 2,300 ppm, but did exceed the American Conference of Governmental Industrial Hygienists excursion limit of 250 ppm. Since methylene chloride is highly volatile (vapor pressure, 349 mmHg at $20^{\circ}C$), the post-dispersion atmospheric concentration can rise instantaneously. Moreover, the o-chlorobenzylidenemalononitrile formulation of tear gas (CS gas) is an acute upper respiratory tract irritant. Therefore, tear gas mixtures should be handled with delicate care.

• 한국자동차공학회논문집
• /
• 제23권2호
• /
• pp.199-207
• /
• 2015

Solid materials of ammonia sources with SCR have been considered for the application of lean NOx reduction in automobile industry, to overcome complex problems of liquid urea based SCR. These solid materials produce ammonia gas directly with proper heating and can be packaged by compact size, because of high volumetric ammonia density. Among ammonium salts and metal ammine chlorides, calcium ammine chloride was focused on this paper due to low decomposition temperature. In order to make calcium ammine chloride in lab-scale, simple reactor and glove box was designed and built with ammonium gas tank, regulator, and sensors. Basic test conditions of charging ammonia gas to anhydrous calcium chloride are chosen from equilibrium vapor pressure by Van't Hoff plot based on thermodynamic properties of materials. Synthetic method of calcium ammine chloride were studied for different durations, temperatures, and pressures with proper ammonia gas charged, as a respect of ammonia gas adsorption rate(%) from simple weight calculations which were confirmed by IC. Also, lab-made calcium ammine chloride were analyzed by TGA and DSC to clarify decomposition step in the equations of chemical reaction. To understand material characteristics for lab-made calcium ammine chloride, DA, XRD and FT-IR analysis were performed with published data of literature. From analytical results, water content in lab-made calcium ammine chloride can be discovered and new test procedures of water removal were proposed.

• Archives of Pharmacal Research
• /
• 제24권5호
• /
• pp.402-406
• /
• 2001

Gas chromatographic method was investigated for the chiral separation of several $\beta$-blockeros(atenolol, betaxolol, bisoprolol, metoprolol and pindolol) using (-)-$\alpa$-methoxy-$\alpa$-(trifluoromethyl)phenylacetyl chloride as a chiral derivatizing agent for amino group. Prior to N-acylation, hydroxyl group was converted into O-silyl ethers by react with N-methyl-H-(taimethylsilyl)trifluoroacetamide. The reaction was selective and rapid and the diasteromeric derivatives were well separated by capillary gas chromatography. (R)-isomers were eluted faster than (S)-isomers when (-)-$\alpa$-methoxy-$\alpa$-(trifluoromethyl)phenylacetyl chloride was used as the chiral derivatizing agent. But in the opposite sequence when (+)-$\alpa$-methoxy-$\alpa$-(trifluoromethyl)phenylacetyl chloride was used. No racemization was found during the reaction.

• 분석과학
• /
• 제16권3호
• /
• pp.218-225
• /
• 2003

반도체 공정에서는 많은 종류의 가스를 사용하는데 그들 중 염산 가스는 독성으로 인해 많은 환경오염 문제들을 야기 시키고 있다. 본 논문에서는 염산 가스를 기존의 제거 방식이 아닌 제올라이트수지 등의 흡착제들을 이용한 제거 방법 및 측정을 하는 연구를 수행하였다. 실험 장치는 실험조건을 고려하여 직접 설계 및 제작을 하였다. 그리고 각종 수지를 이용한 흡착제거정도를 비교하기 위하여 제올라이트 A, $Ag^+$ 이온으로 치환된 AgA 제올라이트, ZnO, $AgMnO_3$ 등의 수지를 이용하여 실험하였다. 가스의 분석은 적외선 분광기 (FT-IR)를 이용하여 정성 및 정량분석을 하여 각 각의 수지에 의한 염산 가스의 제거량을 계산함으로써 각 수지의 제거 효율을 확인, 비교하였다. 본 실험에서 사용된 수지들 중에서 ZnO 가 수지 1 g에 대해 0.067 g 의 HCl 가스를 제거하는 가장 좋은 결과를 나타내었다.

• 자원리싸이클링
• /
• 제16권1호
• /
• pp.37-43
• /
• 2007

본 연구에서는 함수염화마그네슘 탈수를 통하여 마그네슘 용융염전해의 원료 물질인 무수염화마그네슘을 제조하였으며, 탈수는 관상로를 이용하여 $350{\sim}580^{\circ}C$ 범위에서 수행하였다. 함수염화마그네슘을 대기중에서 탈수할 경우 모두 산화마그네슘으로 산화되는 것을 알 수 있었으며, 염화수소가스 분위기에서 탈수시켜 무수염화마그네슘을 제조할 수 있음을 확인하였다. 그리고 탈수 온도와 시간이 증가함에 따라 탈수된 무수염화마그네슘의 결정성이 증가하였다. 염화수소가스 분위기에서 탈수가 일어나는 동안 발생되는 미반응 염화수소가스는 모두 염산으로 회수할 수 있었으며, 회수한 염산은 산화마그네슘으로부터 함수염화마그네슘을 제조하는 데에 재사용 가능할 것으로 판단된다.

• 한국대기환경학회지
• /
• 제15권2호
• /
• pp.183-190
• /
• 1999

Magnetite was synthesized with $FeSO_4$, and NaOH for the decomposition of carbon dioxide and for the study of the methane formation. The chemical equivalent ratio was changed from 0.5 to 1.50 for the magnetite synthesis. The chemical equivalent ratio was fixed in 1.00, and Nickel chloride and Rhodium chloride equally added and synthesized with the ratio was of 0.10~10.00 mole%. The crystal strucure of the synthesized magnetite was measured XRD. Putting synthesized magnetite in the reactor and using hydrogen gas oxygen-deficient magnetite was made. Injecting carbon dioxide in the reactor, the decomposition reaction was experimented. The formation of methane was confirmed injecting hydrogen gas in the reactor after carbon dioxide was decomposed.

• 한국산업보건학회지
• /
• 제4권1호
• /
• pp.25-32
• /
• 1994

Arylmethyl halides(benzyl chloride, BZYC; benzal chloride, BZYA; benzotrichloride, BZTC) and related compounds(benzyl alcohol, BZYA; benzoyl chloride, BZOC) were determined by GC using capillary column. Detailed results are as follows. 1. Stability In methanol benzotrichloride slowly transferred to benzoyl chloride by hydrolysis(ca. 7.5% for 5 days), but the others were stable. Therefore, benzotrichloride solution should be prepared just before analysis. 2. GC analysis Tenax-GC was used to absorbent and desorption solvents were $CCl_4$ and MeOH. Arylmethyl halides were analyzed within 7.5min without interference with related compounds. The calibration curve(ca. 15-80 ppm in soln), repeatability(n=10) and the desorption efficiency were good. Limit of detection by NIOSH method was about 0.003 ppm for arylmethyl halide, respectively. To analyze arylmethyl halides and related compounds in working places GC using capillary column is anticipated to be used effectively.

• 공업화학
• /
• 제10권3호
• /
• pp.362-366
• /
• 1999

Poly(vinyl chloride) (PYC) 유도제들로부터 용매증발법을 이용하여 바이오센서용 막을 제조하고 기체 투과특성을 조사하였다. 진공하에서 용매를 증발시켜서 제조된 막보다 공기 중에서 서서히 증발시켜 제조된 막의 투과도 계수가 더 높은 것으로 나타났다. PVC 유도체 막들에 대한 $CO_2$와 $O_2$의 투과도 계수는 공급부의 압력이 증가함에 따라 감소하였다. Carboxylated poly(vinyl chloride) (CPVC) 에 대한 dioctyl phthalate (DOP)의 첨가량이 증가함에 따라 투과도 계수는 증가하였다. 예를 들면 DOP 30 wt. %를 첨가하였을 때, $CO_2$와 $O_2$의 투과도 계수는 100 psig에서 각각 2.03, 0.96 Barrer 이었으며, DOP를 첨가하지 않았을 때 보다 약 4~5배 증가하였다. Poly(vinyl chloride-co-vinyl acetate) (PVCA)를 가수분해함으로써 OH기가 도입된 poly(vinyl chloride-co-vinyl acetate-co-vinyl alcohoI) (Syn-PVCAcAl)에 DOP를 첨가하였을 때 $CO_2$의 투과도 계수에서 시판제품 PVCAcAl보다 비교적 높은 값을 나타내었으나, $O_2$의 투과도 계수에는 차이가 없었다.

• 대한기계학회논문집B
• /
• 제39권11호
• /
• pp.843-851
• /
• 2015

질소산화물 저감에 사용하는 solid SCR용 고체상 암모늄 저장물질의 하나인 magnesium ammine chloride에 대한 실험실 규모에서의 제조방법과 제조한 물질의 분석연구를 수행하였다. 기저물질인 염화마그네슘에 암모니아 가스를 흡착하기 위한 실험조건의 도출을 위하여, Van't Hoff Plot으로 평형압 선도를 계산하였고, 간이반응기를 제작한 후, magnesium ammine chloride를 제조하였다. DA, IC, FT-IR, XRD, SDT 등으로 제조한 시료의 성분을 분석하였고, 제조한 시료에 수분이 존재한다는 것을 알 수 있었다. 암모니아 가스 흡착률을 증대하기 위하여 수분 제거에 적절한 새로운 실험방법을 제안하였고, 제안한 방법을 적용한 결과, 암모니아 가스의 흡착률이 대략 100%에 도달하였다.