• Korean Journal of Organic Agriculture
• /
• v.8 no.2
• /
• pp.89-96
• /
• 2000

To reduce loss of nitrogen and generation of ammonia gas during composting, poultry manure and sawdust were mixed at the equivalent ratio and calcium chloride, fused superphosphate and vermiculite were added. Ammonia and sulfurous gas during composting, and NH4-N and NO3-N contents of composts were periodically measured. With the treatments of 0.5∼3% calcium chloride and 3% fused superphosphate, ammonia and sulfurous gas during composting significantly decreased, and especially generation of gases sharply reduced and a increase of calcium chlorde. Extractable NH4-N content in composts treasted with calcium chloride and fused superphosphate were high but extractable NO3-N markedly decreased. In conclusion, the results suggest that it is necessary the additon of 1∼3% calcium chloride or 3% fused superphosphate to reduce loss of nirogen and generation of offensive odor during composting of poultry manure mixed with sawdust.

• Safety and Health at Work
• /
• v.1 no.1
• /
• pp.98-101
• /
• 2010

This study explored the health hazard of those exposed to methylene chloride by assessing its atmospheric concentration when a tear gas mixture was aerially dispersed. The concentration of methylene chloride ranged from 311.1-980.3 ppm (geometric mean, 555.8 ppm), 30 seconds after the dispersion started. However, the concentration fell rapidly to below 10 ppm after dispersion was completed. The concentration during the dispersion did not surpass the National Institute for Occupational Safety and Health 'immediately dangerous to life or health' value of 2,300 ppm, but did exceed the American Conference of Governmental Industrial Hygienists excursion limit of 250 ppm. Since methylene chloride is highly volatile (vapor pressure, 349 mmHg at $20^{\circ}C$), the post-dispersion atmospheric concentration can rise instantaneously. Moreover, the o-chlorobenzylidenemalononitrile formulation of tear gas (CS gas) is an acute upper respiratory tract irritant. Therefore, tear gas mixtures should be handled with delicate care.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.2
• /
• pp.199-207
• /
• 2015

Solid materials of ammonia sources with SCR have been considered for the application of lean NOx reduction in automobile industry, to overcome complex problems of liquid urea based SCR. These solid materials produce ammonia gas directly with proper heating and can be packaged by compact size, because of high volumetric ammonia density. Among ammonium salts and metal ammine chlorides, calcium ammine chloride was focused on this paper due to low decomposition temperature. In order to make calcium ammine chloride in lab-scale, simple reactor and glove box was designed and built with ammonium gas tank, regulator, and sensors. Basic test conditions of charging ammonia gas to anhydrous calcium chloride are chosen from equilibrium vapor pressure by Van't Hoff plot based on thermodynamic properties of materials. Synthetic method of calcium ammine chloride were studied for different durations, temperatures, and pressures with proper ammonia gas charged, as a respect of ammonia gas adsorption rate(%) from simple weight calculations which were confirmed by IC. Also, lab-made calcium ammine chloride were analyzed by TGA and DSC to clarify decomposition step in the equations of chemical reaction. To understand material characteristics for lab-made calcium ammine chloride, DA, XRD and FT-IR analysis were performed with published data of literature. From analytical results, water content in lab-made calcium ammine chloride can be discovered and new test procedures of water removal were proposed.

• Archives of Pharmacal Research
• /
• v.24 no.5
• /
• pp.402-406
• /
• 2001

Gas chromatographic method was investigated for the chiral separation of several $\beta$-blockeros(atenolol, betaxolol, bisoprolol, metoprolol and pindolol) using (-)-$\alpa$-methoxy-$\alpa$-(trifluoromethyl)phenylacetyl chloride as a chiral derivatizing agent for amino group. Prior to N-acylation, hydroxyl group was converted into O-silyl ethers by react with N-methyl-H-(taimethylsilyl)trifluoroacetamide. The reaction was selective and rapid and the diasteromeric derivatives were well separated by capillary gas chromatography. (R)-isomers were eluted faster than (S)-isomers when (-)-$\alpa$-methoxy-$\alpa$-(trifluoromethyl)phenylacetyl chloride was used as the chiral derivatizing agent. But in the opposite sequence when (+)-$\alpa$-methoxy-$\alpa$-(trifluoromethyl)phenylacetyl chloride was used. No racemization was found during the reaction.

• Analytical Science and Technology
• /
• v.16 no.3
• /
• pp.218-225
• /
• 2003

Hydrogen Chloride is among the most problematic gases used in semiconductor process. It raises serious environmental and health problems due to its extreme toxicity. This study is to develop a method to effectively remove hydrogen chloride gas during the process by using various types of inorganic gas adsorption agents, which have not been attempted in the conventional methods. The removal efficiency of the gas was both qualitatively and quantitatively measured by a FT-IR spectrophotometer. The whole device for the measurement has been designed and built in our lab. The removal efficiencies of hydrogen chloride gas were compared between those tested resins; zeolite A, modified AgA zeolite, ZnO, and $AgMnO_3$. The experimental result revealed that ZnO showed the best efficiency that had removed 0.067 g of HCl per 1 g of the resin used.

• Resources Recycling
• /
• v.16 no.1 s.75
• /
• pp.37-43
• /
• 2007

It was studied to prepare anhydrous magnesium chloride which could used as the raw material of a fused salt electrolysis of magnesium by dehydration of magnesium chloride hydrate. The dehydration was carried out in a tube furnace at $350{\sim}580^{\circ}C$. It was confirmed that magnesium chloride hydrate was oxdized to magnesia through the dehydration in ambient atmosphere, but anhydrous magnesium chloride could be obtained in hydrogen chloride gas atmosphere. And the crystallity of the product increased with increasing temperature and time of dehydration. All of the un-reacted hydrogen chloride gases which were generated during the dehydration in hydrogen chloride gas atmosphere could be recovered as hydrochloric solution, and it could be reused for chlorination of magnesia to prepare magnesium chloride hydrate.

• Journal of Korean Society for Atmospheric Environment
• /
• v.15 no.2
• /
• pp.183-190
• /
• 1999

Magnetite was synthesized with $FeSO_4$, and NaOH for the decomposition of carbon dioxide and for the study of the methane formation. The chemical equivalent ratio was changed from 0.5 to 1.50 for the magnetite synthesis. The chemical equivalent ratio was fixed in 1.00, and Nickel chloride and Rhodium chloride equally added and synthesized with the ratio was of 0.10~10.00 mole%. The crystal strucure of the synthesized magnetite was measured XRD. Putting synthesized magnetite in the reactor and using hydrogen gas oxygen-deficient magnetite was made. Injecting carbon dioxide in the reactor, the decomposition reaction was experimented. The formation of methane was confirmed injecting hydrogen gas in the reactor after carbon dioxide was decomposed.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.4 no.1
• /
• pp.25-32
• /
• 1994

Arylmethyl halides(benzyl chloride, BZYC; benzal chloride, BZYA; benzotrichloride, BZTC) and related compounds(benzyl alcohol, BZYA; benzoyl chloride, BZOC) were determined by GC using capillary column. Detailed results are as follows. 1. Stability In methanol benzotrichloride slowly transferred to benzoyl chloride by hydrolysis(ca. 7.5% for 5 days), but the others were stable. Therefore, benzotrichloride solution should be prepared just before analysis. 2. GC analysis Tenax-GC was used to absorbent and desorption solvents were $CCl_4$ and MeOH. Arylmethyl halides were analyzed within 7.5min without interference with related compounds. The calibration curve(ca. 15-80 ppm in soln), repeatability(n=10) and the desorption efficiency were good. Limit of detection by NIOSH method was about 0.003 ppm for arylmethyl halide, respectively. To analyze arylmethyl halides and related compounds in working places GC using capillary column is anticipated to be used effectively.

• Applied Chemistry for Engineering
• /
• v.10 no.3
• /
• pp.362-366
• /
• 1999

Membranes for biosensor were prepared from poly(vinyl chloride) (PVC)l derivatives using the solution casting method, and their gas permeabilities were studied. The polymer membranes dried slowly in air showed higher permeability coefficients than those dried in vacuum. The permeabilily coefficients of carboxylated poly(vinyl chloride) (CPVC) membranes for $O_2$ and $CO_2$ decreased as the pressure of the feed gas increased. The addition of dioctylphthalate (DOP) enhanced the permeation rates for $O_2$ and $CO_2$. For example, the permeability coefficients of CPVC membranes containing 30 wt. % DOP for $O_2$ and $CO_2$ at 100 psig were 2.03 and 0.96 Barrer, respectively, which were about 4~5 times higher than those of the membranes without DOP. Poly(vinyl chloride-co-vinyl acetate-co-vinyl alcohol) (Syn-PVCAcAl) obtained by hydrolysis of poly(vinyl chloride-co-vinyl acetate (PVCA) showed a higher permeability coefficient for $CO_2$ in the presence of DOP than that for commercial PVCAcAl, but did not show any significant difference in permeability for $O_2$.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.11
• /
• pp.843-851
• /
• 2015

Among various ammonium salts and metal ammine chlorides used as solid materials for the sources of ammonia with solid SCR for lean NOx reduction, magnesium ammine chloride was taken up for study in this paper because of its ease of handling and safety. Lab-scale synthetic method of magnesium ammine chloride were studied for different durations, temperatures, and pressures with proper ammonia gas charged, as a respect of ammonia gas adsorption rate(%). To understand material characteristics for lab-made magnesium ammine chloride, DA, IC, FT-IR, XRD and SDT analyses were performed using the published data available in literature. From the analytical results, the water content in the lab-made magnesium ammine chloride can be determined. A new test procedure for water removal was proposed, by which the adsorption rate of lab-made sample was found to be approximately 100%.