• Analytical Science and Technology
• /
• v.12 no.2
• /
• pp.99-104
• /
• 1999

A stepwise gradient elution with two wavelengths detection was performed for the separation and determination of some anions in saline water. The eight anions such as iodate, bromate, nitrite, bromide, nitrate, chromate, iodide and thiocyanate were successfully separated using AS-7 column and sodium chloride/sodium phosphate buffer solution as an eluant within 40 min. The separation behaviors of anions were studied at various sodium chloride concentrations. The peak shapes of anions of bromate, nitrite, bromide and nitrate gradually broadened as the concentration of sodium chloride increased until 1.0 M in the sample solutions. However, no effect was observed in the peak shapes of chromate, iodide and thiocynate. A good linearity was obtained at the range of ppm(mg/L). The detection limit was proved to be $10-720{\mu}g/L$ for the eight anions with $50{\mu}L$ injection volume. This method was applied to the determination of $Br^-$, ${NO_3}^-$ and $I^-$ in sea water.

• Korean Chemical Engineering Research
• /
• v.46 no.3
• /
• pp.512-515
• /
• 2008

The removal of iron from neodymium chloride solution was carried out by solvent extraction using Alamine 336 in kerosine. The effect of Alamine 336, hydrochloric acid and chloride ion concentrations on the extraction of Fe were studied. The results showed that Alamine 336 as an extractant for removal of iron was effective and the extraction percentage of iron was increased with increasing hydrochloric acid and chloride ion concentration in aqueous solution. The extraction of 99% of iron is attained at a ratio of A/O = 4 by distilled water. The stripping yield of iron from loaded Alamine 336 decreased with decreasing hydrochloric acid concentration in stripping solution.

• Journal of Applied Biological Chemistry
• /
• v.60 no.3
• /
• pp.279-282
• /
• 2017

Chloride is known as the most important anion in salt-affected soils. We observed the degree of EC change upon AgCl precipitation was quantitatively related with the chloride concentration. Method validation and intercomparison with ion chromatography revealed the proposed method can provide rapid and moderately precise chloride concentrations in salt-affected soils.

• Polymer(Korea)
• /
• v.36 no.5
• /
• pp.564-572
• /
• 2012

A terpolymer of vinylbenzyl chloride-co-ethyl methacrylate-co-styrene (VBC-EMA-St) was prepared for membrane capacitive deionization (MCDI) by radical polymerization and amination reaction of various amination times. Nonfluoro aminated VBC-EMA-St anion-exchange membranes were characterized by Fourier transform infrared (FTIR) spectrometry. Molecular weight, polydispersity and thermal stability were obtained by gel permeation chromatography (GPC) and thermogravimetric analysis (TGA). The basic properties such as water uptake, ion exchange capacity, electrical resistance and CDI charge-discharge current were measured. The optimal values of ion exchange capacity, water uptake, electrical resistance and molecular weight of synthesized anion-exchange membrane were 1.69 meq/g, 23.7%, 1.61 ${\Omega}{\cdot}cm$ and $3.4{\times}10^4$ g/mol, respectively. As compared with conventional membrane, the pattern of cyclic charge-discharge current of synthesized anion-exchange membrane indicated efficient electrosorption and desorption.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.4A
• /
• pp.365-371
• /
• 2009

It is time-consuming to estimate chloride diffusivity of concrete by concentration difference test. For the reason chloride diffusivity of concrete is mainly tested by electrically accelerated method, which is accelerating the movement of chloride ion by potential difference. In this study, portland cement concrete and concrete containing with ground granulated blast-furnace slag (40 and 60% of cement by weight) with water-cementitious material ratio 40, 45, 50 and 60% were manufactured. To compare with chloride diffusivity calculated from the electrically accelerated test and immersed test in artifical seawater, chloride diffusivity tests were conducted. From the results of regression analysis, regression equation between accelerated chloride diffusivity and immersed chloride diffusivity was linear function. And the determinant coefficient was 0.96 for linear equation.

• YAKHAK HOEJI
• /
• v.34 no.3
• /
• pp.206-211
• /
• 1990

Total suspended particles were collected and size-fractionated by an Andersen high-volume air sampler at Chungang University located near the Han River, Seoul, Korea, during the period form March, 1986 to August, 1986 and from March, 1987 to February, 1988. The concentrations and the particle size distributions of anions such as chloride, nitrate and sulfate were determined by ion chromatography. The averages of concentrations were $125.43\;{\mu}g/m^3$ in 1986 and $189.19\;{\mu}g/m^3$ in 1987 for total suspended particles (TSP), $2.12\;{\mu}g/m^3$ in 1986 and $4.14\;{\mu}g/m^3$ in 1987 for chloride, $4.39\;{\mu}g/m^3$ in 1986 and $5.95\;{\mu}g/m^3$ in 1987 for nitrate and $11.98\;{\mu}g/m^3$ in 1986 and $19.29\;{\mu}g/m^3$ in 1987 for sulfate. Size distribution of TSP was found to be generally bimodal. Chloride exhibited a seasonal variation in the distribution; fine particles were predominant in the winter whereas the concentration of coarse ones was almost same through four seasons. Nitrate showed a distribution similar to that of chloride. Such variation was less significant for sulfate. For chloride and nitrate, the relationship between the monthly averaged distribution pattern and air temperature was analyzed in terms of fine fraction (FF). The FF decreased with increasing air temperature.

• Computers and Concrete
• /
• v.23 no.1
• /
• pp.69-80
• /
• 2019

Modeling approach for mesoscopic model of concrete depicting mass transportation and physicochemical reaction is important since there is growing demand for accuracy and computational efficiency of numerical simulation. Mesoscopic numerical simulation considering binder, aggregate and Interfacial Transition Zone (ITZ) generally produces huge number of DOFs, which is inapplicable for full structure. In this paper, a three-dimensional multiscale approach describing three-phase structure of concrete was discussed numerically. An effective approach generating random aggregate in polygon based on checking centroid distance was introduced. Moreover, ITZ elements were built by parallel expanding the surface of aggregates on inner side. By combining mesoscopic model including full-graded aggregate and macroscopic model, cases related to diffusivity and thickness of ITZ, volume fraction and grade of aggregate were studied regarding the consideration of multiscale compensation. Results clearly showed that larger analysis model in multiscale model expanded the diffusion space of chloride ion and decreased chloride content in front of rebar. Finally, this paper addressed some worth-noting conclusions about the chloride distribution and rebar corrosion regarding the configuration of, rebar diameter, concrete cover and exposure period.

• Corrosion Science and Technology
• /
• v.5 no.2
• /
• pp.39-44
• /
• 2006

The dissolution amount of Zn plate was $0.058mg/cm^2$ in the non-magnetically treated solution, and was $0.059mg/cm^2$ in the magnetically treated solution after 24 hours of immersion. The magnetic treatment had no effect to corrosion of Zn plate as pH on surface was not recognized the difference. The addition of Zn(II) ion in the solution was prepared to the effects of corrosion and dissolution of Fe. The regularity was not obtained the effect of the magnetic treatment on the dissolution of Fe plate.

• Macromolecular Research
• /
• v.12 no.4
• /
• pp.427-430
• /
• 2004

Calix[4]crown-6-2,4-bis(2-hydroxyethyl ether) (2), which has crown-6 moieties at the 1- and 3-positions and hydroxyethyl functions at the 2- and 4-positions, was prepared for the syntheses of polyester 3 and polyurethane 4 by reactions with adipoyl chloride and hexamethylene diisocyanate, respectively. The ion binding characteristics of monomer 2 and polymers 3 and 4 toward alkali and alkali earth metal ions were measured by liquid-liquid extraction from the aqueous phase into the organic phase. We observed that the polyurethane 4 has a higher binding affinity toward various metal cations when compared to polyester 3, which exhibits cesium ion selectivity.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.8
• /
• pp.1190-1196
• /
• 2005

Halopyrroles, N-substituted 2-halopyrroles were prepared by halogenation of N-substituted pyrroles with NBS, NCS, or surfuryl chloride. N-Substituted 3-halopyrroles were synthesized by acid-catalyzed thermal and photochemical isomerization reactions of N-substituted 2-halopyrroles. Both the thermal and photochemical reactions were acid-catalyzed. For the acid-catalyzed isomerization, a mechanism of [1,3] bromine shift followed by deprotonation is operated. For the acid-catalyzed photoisomerization, an excited triplet state of 2-protonated N-benzyl-2-halopyrrole produces an intermediate N-substituted pyrrole complex with halonium ion which is equilibrated with N-substituted pyrrole plus halonium ion, and then the halonium ion newly adds to 3-position of N-substituted pyrrole followed by deprotonation to afford N-benzyl-3-halopyrrole.