• 폴리머
• /
• 제35권6호
• /
• pp.586-592
• /
• 2011

본 연구에서는 전바나듐 레독스-흐름 전지용 음이온교환막의 제조를 위하여 vinylbenzyl chloride-co-styreneco-hydroxyethyl acrylate(VBC-co-St-co-HEA) 공중합체를 합성하였으며, 아민화 및 가교 반응을 통하여 음이온교환막을 제조하였다. 구조확인을 위하여 FTIR, $^1H$ NMR, TGA, GPC 분석을 하였으며, 음이온교환막의 함수율, 이온교환용량, 전기저항, 이온전도도 및 전바나듐 레독스-흐름 전지의 효율을 측정하였다. 음이온교환막의 이온교환용량, 전기저항, 이온전도도는 각각 1.17 meq/g, $1.9{\Omega}{\cdot}cm^2$, 0.009 S/cm이었으며, 전바나듐 레독스-흐름 전지 효율 실험 결과 충 방전효율, 전압효율 및 에너지효율은 각각 99.5, 72.6, 72.1%이었다.

• 한국건축시공학회지
• /
• 제23권4호
• /
• pp.349-358
• /
• 2023

본 연구에서는 고로슬래그 미분말을 혼입한 콘크리트의 초기강도를 증진시키고, 탄산화 저항성과 염해 저항성을 향상시키기 위해 탄산칼륨을 전기분해하여 생성된 알칼리수를 배합수로 사용하여 콘크리트를 제작하였다. 초기강도 증진을 확인하기 위해 압축강도 측정을 진행하였으며, 촉진 탄산화 시험과 염소이온 침투저항성 시험을 진행하였다. 실험결과 일반 배합수를 사용한 콘크리트에 비해 전기분해 알칼리수를 배합수로 활용한 콘크리트의 초기강도가 증진된 것을 확인하였으며, 탄산화 저항성과 염소이온 침투저항성 또한 향상된 것을 확인하였다.

• 콘크리트학회논문집
• /
• 제15권1호
• /
• pp.25-34
• /
• 2003

최근 들어 물리 화학적 침해로 인한 RC 구조물의 열화에 대한 관심이 높아지고 있는 실정이다. RC 구조물의 성능을 저하시키는 여러 가지 요인 중에서 특히 염소이온 침투로 인한 콘크리트내의 철근 부식이 가장 심각한 문제로 인식되고 있다. 본 연구에서는 콘크리트내의 염소이온 침투에 대한 수학적 모델을 제안하였다. 기존의 모델을 개선하기 위해 콘크리트 내부로 염소이온 침투에 대한 모델을 염수의 침투와 공극수를 통한 염소이온 확산항으로 구성하였다. 또한, 수화도, 상대습도, 온도, 염소이온 구속도에 따른 확산계수의 변동성을 염소이온 침투 모델에 고려하였다. 제안한 모델의 검증을 위하여 염소이온 침투 현상 해석 프로그램인 Life-365와의 해석 결과와 비교하였으며, 다양한 예제의 해석 결과를 비교 분석함으로써 염소이온 침투현상에 미치는 주요 인자의 영향과 제안된 모델의 적용성을 검토하였다. 향후 제안한 염소이온 침투 모델을 적용하여 RC 구조물의 사용수명 혹은 잔존수명을 예측하여 이를 RC 구조물의 내구성 설계와 유지관리에 활용할 수 있을 것으로 기대된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.665-670
• /
• 2001

The studies on chloride diffusion of concrete have been done so far by many researchers. However, there are few studies that present the effects of other attacks on chloride diffusion properties. Therefore, in this study the experiments are carried out to show the effects of combined attacks, such as carbonation, sulfate attacks, on chloride diffusivity in concrete. The specimens are made by varying cement type and replacement ratio of fly ash. The results show that cement type and replacement of fly ash do not affect greatly chloride diffusion properties. And concrete treated by combined attacks show a little higher chloride content than those treated by chloride solution only. Therefore, the effects of these factors should be taken into account in predicting the penetration of chloride ion in concrete.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.771-776
• /
• 2001

Test results on the deterioration process of concrete under single and combined attacks of chloride penetration have been obtained. After test period of 52 weeks, it is found that the internally penetrated chloride ion contents are less in the single attacks of chloride than the combined attacks of chloride and sulfate. Both the diffusion coefficients and surface chloride concentration derived form the chloride profiles showed a time dependence. Also the performance of fly ash-blended cements was observed to be better than plain cements in retarding chloride attack. However it should be needed that improved chloride diffusion model for the combined deterioration process.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.172-173
• /
• 2014

The study is used to verify the applicability of the sensor to monitor penetration of chloride into the concrete, like real coastal environment. After manufacturing the specimen adapt corrosion sensor for chloride penetration monitoring, chloride spray experiment was conducted. And then, It was checked the possibility of monitoring of the penetrated chloride by measuring the resistance of the corrosion sensor that was embedded in each depth of the concrete. Experimental results, it is confirmed that the corrosion resistance of the sensor was increased depending on the concentration of chloride. Therefore, it is estimated that the sensor is available for monitoring of chloride penetration.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.254-260
• /
• 1997

Chloride-induced corrosion of reinforcement is one of the main factors which cause the deterioration of concrete structures. Durability and service lives of the concrete sturctures should be predicted in order to minimize the risk of corrosion of reinforcement. The objective of this study is to suggest the basis of analytical methods of predicting the corrosion threhold time of concrete structures. Based on the chemistry and physics of chloride ion transport and corrosion process, chloride intrusion with various exposure conditions, variability of diffusivity and transport of pore water in concrete are taken into consideration in applying finite element formulation to the predicion of corrosion threhold time. The effects of main factors on the prediction of chloride intrusion and corrosion threhold time are examined. In addition, after chloride diffusivities of several mixture proportions with different parameters are measured by chloride diffusion test, the exemplary anayses of corrosion threhold time of those mixture proportions are carried out.

• 콘크리트학회논문집
• /
• 제11권3호
• /
• pp.193-203
• /
• 1999

The corrosion of steel reinforcements in concrete is of great concern in recent years. This study is focused on the corrosion behavior of steel bars induced by internal chlorides in concrete at early ages. The main objective of this study is to determine the chloride thresholds causing depassivation and active corrosion of steel reinforcement in concrete. To examine the threshold concentration of chloride ion, the half-cell potential, chemical composition of expressed pore solutions of concrete and the rate of corosion area of the specimens were measured. Major variables include the added amount of chlorides in concrete, types of binders, and water-to-binder ration. From the present comprehensive experimental results, the factors influencing chloride-induced corrosion are investigated, and the chloride thresholds causing active corrosion of steel bars are proposed. The present study will enable to specify the realistic chloride limit in concrete which can be used in the future technical specification.

• 상하수도학회지
• /
• 제18권4호
• /
• pp.493-499
• /
• 2004

Rejection characteristics of heavy metals by nanofiltration membranes were investigated. Nanofiltration membranes rejected heavy metals much better than chloride, sulfate and TOC, of which concentration in synthetic wastewater was higher than that of heavy metals. To consider rejection characteristics of various metals by nanofiltration membranes, separation coefficient, which is the ratio of the metal permeation rate to the chloride ion or TOC permeation rate, was introduced. In spite of different materials and different nominal salt rejection of nanofiltration membrane used, the separation coefficients of metals were nearly the same. In particular, the separation coefficient of arsenic against chloride ion and TOC was larger than any other separation coefficient of heavy metals. These phenomena were observed in the relationship between the molar conductivity and the separation coefficient for heavy metals.

• Bulletin of the Korean Chemical Society
• /
• 제27권5호
• /
• pp.739-743
• /
• 2006

Synthesis of cholic acid-based tripodal receptor (1) and its high chloride ion affinity in comparison with that of chenodeoxycholic acid (2) and lithocholic acid-based receptor (3) was achieved. Anion binding affinities of the receptors were evaluated $by\;^1H$ NMR and ITC titrations. Tripodal receptor 1 showed a selective affinity for $CI ^-$ over $Br ^-$, $I^-$, $H_2 PO _4\;^-$, and $CH _3 CO_2\;^-$. The selectivity of 1 for $CI ^-$ is about 3 times that of $Br ^-$, and 17 times that for $H_2 PO_4\;^-$.