• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.3
• /
• pp.1197-1200
• /
• 2015

Breast cancer metastasis is a major cause of cancer-related death in women. However, markers for diagnosis of breast cancer metastasis are rare. Here, we reported that TET1, a tumor suppressor gene, was downregulated and hypermethylated in highly metastatic breast cancer cell lines. Moreover, silencing of TET1 in breast cancer cells increased the migration and spreading of breast cancer cells. In breast cancer clinical samples, TET1 expression was reduced in LN metastases compared with primary tissues. Besides, the methylation level of the TET1 promoter was increased significantly in LN metastases. Taken together, these findings indicate that promoter hypermethylation may contribute to the downregulation of TET1 and could be used as a promising marker for diagnosis in patients with breast cancer metastasis.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.3
• /
• pp.847-850
• /
• 2012

Tumor necrosis factor (TNF)-alpha-induced protein 8 (TNFAIP8 or TIPE) is a recently identified protein considered to be associated with carcinogenesis. To investigate its expression pattern in pancreatic cancer patients and to analyse its correlation with clinicopathological significance and the expression levels of epithelial growth factor receptor (EGFR), immunohistochemistry was performed to detect the TNFAIP8 and EGFR proteins in pancreatic cancers, pancreatitis tissues, and healthy controls. The results showed stronger staining of TNFAIP8 protein in pancreatic cancer tissues compared with normal pancreas tissue. Furthermore, in 56 patients with pancreatic cancer, the expression levels of TNFAIP8 in patients with low tumor stage was higher than that with high tumor stage, and correlated with tumor staging and lymph node metastasis (P<0.05). Furthermore, TNFAIP8 expression positively correlated with EGFR levels (r=0.671135, P<0.05). These results indicate that TNFAIP8 may play important roles in the progression of pancreatic cancer.

• Analytical Science and Technology
• /
• v.8 no.4
• /
• pp.731-738
• /
• 1995

Toxic air pollutants are investigated in a petrochemical industrial park in Taiwan by using a movable open path FTIR. The results show the qualitative and quantitative analysis of emission gases from plants, and also provide the emission rate of different compounds. More than twenty compounds under usual operation are found from this industrial park. The concentration variation with time can be correlated exactly with wind direction. It means that by changing the measuring points, the source of emission can be unambiguously identified. An EPA proved PAL model is applied to estimate the emission rate of either a point or an area source. Local atmospheric stability is determined by releasing the $SF_6$ tracer. The origins of errors come mainly from the uncertainty of source's configuration and the variation of meteorological condition. Through the continuous measurement (half an hour base in this study) of OP-FTIR sensor, the maximum value of emission rate and the annual amount of emission can be derived. The emission rate of the measured toxic gases are derived by the model technique and the results show that the emission amount are in the order of ten to hundred tons per year.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.10
• /
• pp.2935-2940
• /
• 2014

Monodispersed $Bi_2O_2CO_3$ nanoplates with an average width of 320 nm and thicknesses of 50-90 nm were successfully synthesized by a simple solvothermal method in a mixture solution of polyethylene glycol and $H_2O$. The obtained nanoplates were characterized by means of XRD, FT-IR, SEM and TEM. The effect of surfactant sodium dodecyl benzene sulfonate on the morphology of $Bi_2O_2CO_3$ product was investigated. Under simulated solar light irradiation, $Bi_2O_2CO_3$ nanoplates exhibited superior photocatalytic activities towards the degradation of RhB as well as high chemical stability upon cycling photocatalytic test. The nanoplates also showed promising photodegradation ability for eliminating refractory pollutant of phenol. The excellent photocatalytic performance of $Bi_2O_2CO_3$ nanoplates as compared with P25-$TiO_2$ endows them as promising high efficiency photocatalysts.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.4
• /
• pp.506-510
• /
• 2016

A triple-band (TB) oscillator was implemented in the TSMC $0.18{\mu}m$ 1P6M CMOS process, and it uses a cross-coupled nMOS pair and two shunt $4^{th}$ order LC resonators to form a $6^{th}$ order resonator with three resonant frequencies. The oscillator uses the varactors for band switching and frequency tuning. The core current and power consumption of the high (middle, low)- band core oscillator are 3.59(3.42, 3.4) mA and 2.4(2.29, 2.28) mW, respectively at the dc drain-source bias of 0.67V. The oscillator can generate differential signals in the frequency range of 8.04-8.68 GHz, 5.82-6.15 GHz, and 3.68-4.08 GHz. The die area of the triple-band oscillator is $0.835{\times}1.103mm^2$.

• ETRI Journal
• /
• v.37 no.5
• /
• pp.979-989
• /
• 2015

Recently, Hou and others introduced a (2, n) block-based progressive visual cryptographic scheme (BPVCS) in which image blocks can be gradually recovered step by step. In Hou and others' (2, n)-BPVCS, a secret image is subdivided into n non-overlapping image blocks. When t ($2{\leq}t{\leq} n$) participants stack their shadow images, all the image blocks associated with these t participants will be recovered. However, Hou and others' scheme is only a simple 2-out-of-n case. In this paper, we discuss a general (k, n)-BPVCS for any k and n. Our main contribution is to give two constructions (Construction 1 and Construction 2) of this general (k, n)-BPVCS. Also, we theoretically prove that both constructions satisfy a threshold property and progressive recovery of the proposed (k, n)-BPVCS. For k = 2, Construction 1 is reduced to Hou and others' (2, n)-BPVCS.

• Structural Engineering and Mechanics
• /
• v.52 no.3
• /
• pp.559-572
• /
• 2014

This paper presents the results of an experimental investigation on the flexural behavior of doubly reinforced lightweight concrete (R.L.C.) beams tested under cyclic loading. A total of 20 beam specimens were tested. Test results are presented in terms of ductility index, the degradation of strength and stiffness, and energy dissipation. The flexural properties of R.L.C. beam were compared to those of normal concrete (R.C.) beams. Test results show that R.L.C. beam with low and medium concrete strength (20, 40MPa) performed displacement ductility similar to the R.C. beam. The ductility can be improved by enhancing the concrete strength or decreasing the tension reinforcement ratio. Using lightweight aggregate in concrete is advantageous to the dynamic stiffness of R.L.C. beam. Enhancement of concrete strength and increase of reinforcement ratio will lead to increase of the stiffness degradation of beam. The energy dissipation of R.L.C beam, similar to R.C. beam, increase with the increase of tension reinforcement ratio. The energy dissipation of unit load cycle for smaller tension reinforcement ratio is relatively less than that of beam with higher reinforcement ratio.

• Molecules and Cells
• /
• v.40 no.8
• /
• pp.542-549
• /
• 2017

Cardiomyocyte apoptosis is initiated by various cellular insults and accumulated cardiomyocyte apoptosis leads to the pathogenesis of heart failure. Excessive reactive oxygen species (ROS) provoke apoptotic cascades. Manganese superoxide dismutase (MnSOD) is an important antioxidant enzyme that converts cellular ROS into harmless products. In this study, we demonstrate that MnSOD is down-regulated upon hydrogen peroxide treatment or ischemia/reperfusion (I/R) injury. Enhanced expression of MnSOD attenuates cardiomyocyte apoptosis and myocardial infarction induced by I/R injury. Further, we show that miR-23a directly regulates the expression of MnSOD. miR-23a regulates cardiomyocyte apoptosis by suppressing the expression of MnSOD. Our study reveals a novel model regulating cardiomyocyte apoptosis which is composed of miR-23a and MnSOD. Our study provides a new method to tackling apoptosis related cardiac diseases.

• Journal of Communications and Networks
• /
• v.15 no.1
• /
• pp.54-60
• /
• 2013

In this paper, a novel method called location-based delivery (LBD), which combines the short message service (SMS) and global position system (GPS), is proposed, and further, a realistic system for tracking a target's movement is developed. LBD reduces the number of short message transmissions while maintaining the location tracking accuracy within the acceptable range. The proposed approach, LBD, consists of three primary features: Short message format, location prediction, and dynamic threshold. The defined short message format is proprietary. Location prediction is performed by using the current location, moving speed, and bearing of the target to predict its next location. When the distance between the predicted location and the actual location exceeds a certain threshold, the target transmits a short message to the tracker to update its current location. The threshold is dynamically adjusted to maintain the location tracking accuracy and the number of short messages on the basis of the moving speed of the target. The experimental results show that LBD, indeed, outperforms other methods because it satisfactorily maintains the location tracking accuracy with relatively fewer messages.

• Industrial Engineering and Management Systems
• /
• v.7 no.1
• /
• pp.57-65
• /
• 2008

Available-to-promise (ATP) exhibiting availability of manufacturing resources can be used to support customer order promising. Recently, one advanced function called Capable-to-promise (CTP) is provided by several modern APS (advanced planning system) that checks available capacity for placing new production orders or increasing already scheduled production orders. At the customer enquiry stage while considering the order delivery date and quantity to quote, both ATP and CTP are allocated to support order promising. In particular, current trends of mass customization and multi-side production chain derive several new constraints that should be considered when ATP/CTP allocation planning for order promising - such as customer's preference plants or material vendors, material compatibility, etc. Moreover, ATP/CTP allocation planning would be executed over a rolling time horizon. To utilize capacity and material manufacturing resource flexibly and fulfill more customer orders, ATP/CTP rolling planning should possess resource reallocation mechanism under the constraints of order quantities and delivery dates for all previous order promising. Therefore, to enhance order promising with reliability and flexibility to reallocate manufacturing resource, the ATP/CTP reallocation planning mechanism is needed in order to reallocate material and capacity resource for fulfilling all previous promised and new customer orders beneficially with considering new derived material and capacity constraints.