• Bulletin of the Korean Chemical Society
• /
• 제16권12호
• /
• pp.1218-1222
• /
• 1995

The pKa values of benzyltetrahydrothiophenium halides 1a-f in water have been estimated by measuring the absorbances of the solution in aqueous hydroxide ion solution. Assuming that the ratios of the activity coefficients remains close to unity, the absorbance of the solution can be expressed as A/[SH]o=(εSH+εS-K[OH-])/(1+K[OH-]), where A, [SH]o, K, εSH, and εS- are the absorbance of solution, the initial concentration of 1a-f, the equilibrium constant, and the extinction coefficients for SH and S-, respectively. The εS- and K values that best fit with this equation were calculated by a nonlinear regression analysis with a large number of absorbance data determined at different [OH-] and [SH]o. The pKa values of the SH were then calculated with the relationship Ka=-log K+14. The validity of this method has been demonstrated by the excellent agreements between the experimental and literature pKa values of three organic acids. The pKa values of 1a-f estimated by this method are in the range of 12.5-15.3 and correlate well with the Hammett equation. The large negative deviation for the pKa values of 1e and 1f from the Hammett plot has been attributed to the extra hydrogen bonding between the phenyl group and water molecules attracted by the hydrophilic substituents.

• 한국세라믹학회지
• /
• 제43권9호
• /
• pp.564-568
• /
• 2006

AlO(OH) nano gel is used in precursor of ceramic material, coating material and catalyst. For use of these, not only physiochemical control for particle morphology, pore characteristic and peptization but also studies of synthetic method for preparation of advanced application products were required. In this study, AlO(OH) nano gel was prepared through the aging and drying process of aluminum hydroxides gel precipitated by the hydrolysis reaction of dilute NaOH solution and aluminum sulfate solution. In this process, optimum synthetic condition of AlO(OH) nano gel having excellent pore volume as studying the effect of water and aluminum sulfate mole ratio on gel precipitates has been studied. Water and aluminum sulfate mole ratio brought about numerous changes on crystal morphology, surface area, pore volume and pore size. Physiochemical properties were investigated as using XRD, TEM, TG/DTA, FT-IR, and $N_2$ BET method.

• 한국응용과학기술학회지
• /
• 제15권3호
• /
• pp.21-26
• /
• 1998

Polyvinyl alcohol[PVA] is useful for the production of water-soluble packaging, paper, textile sizes. PVA and Chitosan are known as biodegradable polymers. PVA/chitosan blend films were prepared by solution blends method in the weight ratio of chitosan for the purpose of useful biodegradable films. Thermal and mechanical properties of PVA/chitosan blend films such as DSC, impact strength, tensile strength and morphology by SEM were determined. As a result, The ratio of 10.0wt% PVA/chitosan blend films were similar to PVA. Blend films were completely degraded pH 4.0 better than 7.0, 10.0 in the buffer solution. Also, Blend films were rapidly degraded enzyme(${\beta}-glucosidase$) solution better than pH solution by Enzymolysis.

• 한국표면공학회지
• /
• 제10권1호
• /
• pp.1-18
• /
• 1977

To support the domestic plating industry concerning localized products, survey was conducted in with chemicals and properties of plating solution. Collected samples from 55 factories throughout the country were investigated by spectigated by spectrograph, Hull cell test chemical analysis method to find major chemical components of the plating solution.

• 대한화학회지
• /
• 제13권1호
• /
• pp.13-15
• /
• 1969

This investigation is to make comparative evaluation of the corrosion inhibiting effects of quinoline, oxine and 7-nitroso 8-hydroxy quinoline (7NHQ). In case of quinoline, and oxine, since the N atom in them functions as cation, the process involved is assumed to be cathode control. On the other hand 7-NHQ was found to form a stable chelate compound with $Fe^{++}$ ion in acidic solution and shows as anode control predominantly. After plotting polarization curves, Tafel parameters were calculated in each solution involving the inhibitors, at the same time corrosion inhibiting effects were separately measured and compared from data of both corrosion current and analytical method.

• 대한화학회지
• /
• 제18권2호
• /
• pp.138-142
• /
• 1974

透析係數가 常數로 나타날 수 있는 條件究明으로서 透析質의 種類에 따르는 外部內의 畜積限界量을 究明하였고, 한편 透析係數와 透析溫度사이의 相關關係를 아울러 究明하였다.

• 한국산학기술학회논문지
• /
• 제3권1호
• /
• pp.10-19
• /
• 2002

본고는 다종, 소규모 회분식 공정 또는 공장을 수학적 프로그래밍 기법으로 최적 설계하는 방법에 대한 것이다. 제안된 일반 회분식 공장문제는 Papageorgaki와 Reklaitis에 의해 혼합정수비선형식(MINLP)으로 수립된 것인데, 최적해답을 보장하며 공장의 확장 등 불확실성을 고려하여 선형화 한 후(MILP) 푸는 방법론이 제시되었다. Bende식 문제분할 방식을 개조하여 몇가지 예제에 대한 풀이를 제시하였다. IBM의 OSL 최적화 패키지를 이용하였고 MILP를 직접 푸는 경우보다 계산시간을 크게 단축할 수 있었다.

• Korean Chemical Engineering Research
• /
• 제50권5호
• /
• pp.808-814
• /
• 2012

수열합성법을 이용하여 zinc acetate와 암모니아수를 $80^{\circ}C$의 고온에서 침전 반응시켜 광촉매용 산화아연 입자를 제조하였다. 암모니아수의 pH, 전구체인 zinc acetate의 농도 변화가 산화아연 입자의 특성에 미치는 영향을 조사하였다. 암모니아수 pH 11, zinc acetate의 농도 1.0M, 침전반응온도 $80^{\circ}C$의 조건에서 제조된 산화아연이 평균 입경 $3{\mu}m$로 가장 작았으며, SEM과 XRD 분석을 통하여 육방정계의 봉상 막대형, Anatase 형태의 산화아연이 제조됨을 확인할 수 있었다. DRS와 PL 분석을 통하여 제조된 산화아연이 200~400 nm의 자외선 영역에서 활성을 나타냄을 확인하였고, 자외선 조사 하에서 광분해 실험을 수행한 결과 산화아연은 3시간 동안 식용색소인 Brilliant blue FCF를 57%까지 분해할 수 있었다.

• Nuclear Engineering and Technology
• /
• 제45권1호
• /
• pp.107-114
• /
• 2013

It is required that the pH of the sump solution should be above 7.0 to retain iodine in a liquid phase and be within the material compatibility constraints under LOCA condition of PWR. The pH of the sump solution can be determined by conventional chemical equilibrium constants or by the minimization of Gibbs free energy. The latter method developed as a computer code called SOLGASMIX-PV is more convenient than the former since various chemical components can be easily treated under LOCA conditions. In this study, SOLGASMIX-PV code was modified to accommodate the acidic and basic materials produced by radiolysis reactions and to calculate the pH of the sump solution. When the computed pH was compared with measured by the ORNL experiment to verify the reliability of the modified code, the error between two values was within 0.3 pH. Finally, two cases of calculation were performed for the SKN 3&4 and UCN 1&2. As results, pH of the sump solution for the SKN 3&4 was between 7.02 and 7.45, and for the UCN 1&2 plant between 8.07 and 9.41. Furthermore, it was found that the radiolysis reactions have insignificant effects on pH because the relative concentrations of HCl, $HNO_3$, and Cs are very low.

• Corrosion Science and Technology
• /
• 제15권2호
• /
• pp.84-91
• /
• 2016

The transport and deposition of corrosion products in pressurized water nuclear reactor (PWR) steam generators have led to corrosion (SCC, denting etc.) problems. Lancing, mechanical cleaning and chemical cleaning have been used to reduce these problems. The methods of lancing and mechanical cleaning have limitations in removing corrosion products due to the structure of steam generator tubes. But high temperature chemical cleaning (HTCC) with EDTA is the most effective method to remove corrosion products regardless of the structure. However, EDTA in chemical cleaning aqueous solution and chemical cleaning environments affects the integrity of materials used in steam generators. The nuclear power plants have to perform the pre-test (also called as qualification test (QT)) that confirms the effect on the integrity of materials after HTCC. This is one of the series studies that assess the effect, and this study determines the effects of 20 % EDTA aqueous solution on defective tubes in high temperature chemical cleaning environments. The depth and magnitude of defects in steam generator (SG) tubes were measured by eddy current test (ECT) signals. Surface analysis and magnitude of defects were performed by using SEM/EDS. Corrosion rate was assessed by weight loss of specimens. The ECT signals (potential and depth %) of defective tubes increased marginally. But the lengths of defects, oxides on the surface and weights of specimens did not change. The average corrosion rate of standard corrosion specimens was negligible. But the surfaces on specimens showed traces of etching. The depth of etching showed a range on the nanometer. After comprehensive evaluation of all the results, it is concluded that 20 % EDTA aqueous solution in high temperature chemical cleaning environments does not have a negative effect on defective tubes.