• Bulletin of the Korean Chemical Society
• /
• v.31 no.9
• /
• pp.2453-2458
• /
• 2010

Photochemical studies of N-[(trimethylsilyl)alkyl]saccharins were carried out to investigate their photochemical behavior. Depending on the nature of the substrate and the solvent system employed, reactions of these substances can take place by either SET-promoted silyl migration from carbon to either the amide carbonyl or sulfonyl oxygen or by a N-S homolysis route. The results of the current studies show that an azomethine ylide, arising from a SET-promoted silyl migration pathway, is generated in photoreactions of N-[(trimethylsilyl)methyl]saccharin and this intermediate reacts to give various photoproducts depending on the conditions employed. In addition, irradiation of N-[(trimethylsily)ethyl]saccharin produces an excited state that reacts through two pathways, the relative importance is governed by solvent polarity and protic nature. Finally, photoirradiation of N-[(trimethylsilyl)propyl]saccharin in a highly polar solvent system comprised of 35% aqueous MeOH gives rise to formation of a tricyclic pyrrolizidine and saccharin that generated via competitive SET-promoted silyl transfer and $\gamma$-hydrogen abstraction pathways.

• Journal of the Korean Chemical Society
• /
• v.62 no.3
• /
• pp.226-234
• /
• 2018

In this study, the models described in the textbooks related to floating and sinking phenomena in the chemical domain were evaluated based on the aspect of nature related to the generation of models. To achieve this, we were targeting statement of textbooks from 7th curriculum to 2009 revised curriculum. Analysis of textbooks was performed for science of elementary school (total 2 textbooks) and science of middle school (total 21 textbooks) which dealt with these phenomena. According to the textbooks analysis, characteristics of statement way were (1) No description of the model's prerequisites, (2) Statement based matter viewpoint, (3) Lack of pattern principle, (4) Inadequacy of the case covered. Although the education about the model for the students should be preceded by the education related to the process of model creation rather than the activity using the model, the education about the nature of the model is insufficient. In order to solve this problem, we propose the model statement in textbooks and the development of the model evaluation tool related to model creation.

• Membrane and Water Treatment
• /
• v.1 no.4
• /
• pp.283-296
• /
• 2010

During the disinfection of potable water, humic substances present in the solution react with chlorine to form potential carcinogenic compounds. This study evaluates the feasibility of using a submerged membrane photocatalysis reactor (SMPR) process for treatment of humic substances through the characterization of both organic removal efficiency and membrane hydraulic performance. A simple SMPR was operated and led to the removal of up to 83% of the polluting humic matters. Temporal rates of organic removal and membrane fouling were found to decrease with filtration time. Using tighter membrane in the hybrid process resulted in not only higher organic removal, but also more significant membrane fouling. Under the experimental conditions tested, optimum $TiO_2$ concentration for humic removal was found to be 0.6 g/L, and increasing initial pollutant concentration expectedly resulted in a more substantial membrane fouling. The importance of the influent nature and pollutant characteristics in this type of treatment was also assessed as various water sources were tested (model humic acid solution vs. local water containing natural organic matters). Results from this study revealed the promising nature of the SMPR process as an alternative technique for organic removal in the existing water treatment system.

• Journal of Electrochemical Science and Technology
• /
• v.15 no.1
• /
• pp.198-206
• /
• 2024

Given the high theoretical capacity (1,675 mAh g^-1) and the inherent affordability and ubiquity of elemental sulfur, it stands out as a prominent cathode material for advanced lithium metal batteries. Traditionally, sulfur was sequestered within conductive porous carbons, rooted in the understanding that their inherent conductivity could offset sulfur's non-conductive nature. This study, however, pivots toward a transformative approach by utilizing diatom shell (DS, diatomite)-a naturally abundant and economically viable siliceous mineral-as a sulfur host. This approach enabled the development of a sulfurlayered diatomite/S composite (DS/S) for cathodic applications. Even in the face of the insulating nature of both diatomite and sulfur, the DS/S composite displayed vigorous participation in the electrochemical conversion process. Furthermore, this composite substantially curbed the loss of soluble polysulfides and minimized structural wear during cycling. As a testament to its efficacy, our Li-S battery, integrating this composite, exhibited an excellent cycling performance: a specific capacity of 732 mAh g^-1 after 100 cycles and a robust 77% capacity retention. These findings challenge the erstwhile conviction of requiring a conductive host for sulfur. Owing to diatomite's hierarchical porous architecture, eco-friendliness, and accessibility, the DS/S electrode boasts optimal sulfur utilization, elevated specific capacity, enhanced rate capabilities at intensified C rates, and steadfast cycling stability that underscore its vast commercial promise.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 2000.06a
• /
• pp.215-232
• /
• 2000

The Valence(Z) of positively and negatively charged alumina particles in the dilute suspensions was analyzed with the electrical conductivity of the suspensions. The mobility of negative particles was lower than that of positive particles at a similar Z value because of the stronger effect of chemical bonding over the hydrated particle surfaces. The apparent viscosity of acidic suspensions of 1-40 vol % solid was lower than that of basic suspensions. This result was discussed based on the three important effects of the valence, concentration and nature of hydrated surface of alumina particles. The density of alumina compacts consolidated by filtration through gypsum molds became lower for the basic suspensions than for the acidic suspensions. This result was correlated to the properties of the colloidal alumina suspensions.

• Textile Coloration and Finishing
• /
• v.19 no.1 s.92
• /
• pp.45-52
• /
• 2007

Polyacrylonitrile(PAN) fiber was treated with low-temperature plasmas of argon and oxygen for surface modification, and its surface chemical structure and morphology were examined by a field emission scanning electron microscope(FESEM) and a Fourier-transform infrared microspectroscopy(IMS). The argon-plasma treatment caused the only mechanical effect by sputtering of ion bombardment, whereas the oxygen plasma brought about a chemical effect on the PAN fiber surface. The experimental evidences strongly suggested that cyclization of nitrile group and crosslinking were likely to occur in the oxygen-plasma treatment. On the other hand, with the argon-plasma treatment, numerous my pits resulted in ranging from several tens to hundreds nanometers in radius. The plasma sensitivity of functional groups such as C-H, $C{\equiv}N$, and O-C=O groups in the PAN fiber was dependent on their chemical nature of bonding in the oxygen-plasma, in which the ester group was the most sensitive to the plasma. Vacuum-ultraviolet(VUV) radiation emitted during plasma treatment played no substantial role to alter the surface morphology.

• BMB Reports
• /
• v.45 no.5
• /
• pp.265-274
• /
• 2012

Lignin hydrolysates contain many different chemical species, including ferulic acid, coumaric acid, vanillic acid, vanillin, syringaldehyde and furfural. From the perspective of biofuels, these compounds are problematic and can cause downstream loss of product if not removed prior to beginning the fermentative process. In contrast, a search for these compounds within the literature turns up many papers where the same compounds have beneficial properties pertaining to human health, including as antioxidants and in cancer prevention, or are involved in bacterial cell-to-cell signaling. Consequently, this article reviews the dual nature of these and other compounds found in lignin hydrolysates, highlighting both their detrimental and beneficial activities.

• Macromolecular Research
• /
• v.17 no.1
• /
• pp.14-18
• /
• 2009

The acceleration effect of various organic acids, such as methanesulfonic acid (MSA), ethanesulfonic acid (ESA), 4,4'-sulfonyldibenzoic acid (SDA), diphenylacetic acid (DPAA), and $\rho$-toluenesulfonic acid (TSA), on the rate of styrene bulk polymerization with 2,2,6,6-tetramethylpiperidinyloxy (TEMPO) and benzoyl peroxide (BPO) was investigated. The addition of organic acids significantly accelerated the rate. Among these organic acids, DPAA showed an efficient rate-accelerating effect with living nature of polymerization. When DPAA was used as a rate-accelerating additive for TEMPO-mediated living free radical polymerization (LFRP), the rate of polymerization was dramatically enhanced, the linearity of reaction kinetics was successfully maintained, and the polydispersity was effectively controlled.

• Carbon letters
• /
• v.4 no.4
• /
• pp.163-167
• /
• 2003

The "Film boiling" Chemical Vapor Infiltration (CVI) process is a rapid densification one developed in particular for the elaboration of carbon/carbon composite materials. In order to optimize this new thermal gradient process, we have carried out several studies, on one hand, about the nature of the complex chemical reactions in a confined medium, and on the other hand, relative to the role of heat and mass transfers inside the preform. We show in this study that the introduction of a permeable sheath around the preform leads to hybrid liquid/gas CVI process which presents the advantages of very high densification rates associated with a moderate input energy.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.1
• /
• pp.37-42
• /
• 2011

A new versatile acrylonitrile-bioconverting strain isolated from a petroleum-contaminated sludge sample and identified as Rhodococcus ruber AKSH-84 was used for optimization of medium and biotransformation conditions for nitrilase activity to produce acrylic acid. A simple and rapid HPLC protocol was optimized for quantification of acrylic acid, acrylamide, and acrylonitrile. The optimal medium conditions for nitrilase activity were pH of 7.0, temperature of $30^{\circ}C$, agitation of 150 rpm, and inoculum level of 2%. Glycerol as a carbon source and sodium nitrate as the nitrogen source provided good nutritional sources for achieving good biotransformation. Nitrilase activity was constitutive in nature and was in the exponential growth phase after 24 h of incubation under optimal conditions without addition of any inducer. The substrate preference was acrylonitrile and acetonitrile. The present work demonstrates the biotransformation of acrylonitrile to acrylic acid with the new strain, R. ruber AKSH-84, which can be used in green biosynthesis of acrylic acid for biotechnological processes. The nitrilase produced by the isolate was purified and characterized.