• Korean Chemical Engineering Research
• /
• 제43권2호
• /
• pp.266-271
• /
• 2005

혼합유기산으로부터 숙신산의 분리를 단극 분리막을 사용한 탈염전기투석장치를 이용하여 행하였다. 전류효율, 회수율, 에너지소요량, 분리비 등의 변화를 pH 값과 초기농도비에 따라 측정하였다. 숙신산의 분리는 숙신산과 아세트산의 이온화율, 분자량, 이온전도도, 전자가 크기 그리고 초기농도비 등으로 해석될 수 있었다.

• 한국유기농업학회지
• /
• 제8권1호
• /
• pp.101-109
• /
• 1999

In order to investigate the possibility of treating the different mixture ratios of apple pomace and nightsoil sludge by vermicomposting was performed and the stability of worm casts, and availability of worm casts as plant growth media was evaluated by the analysis of chemical composition. The results were obtained as follows ; 1. The value of cast production at 100% apple pomace treatment was higher than those of other mixture ratios of apple pomace and nightsoil sludge. 2. The highest values of increasing rate and reproductive efficiency were obtained at mixture ratios of 60% apple pomace with 40% nightsoil sludge. 3. The value of increasing rate at 100% nightsoil sludge treatment was lower that those of other mixture ratios of apple pomace and nightsoil sludge. 4. Organic matter, available inorganic nutrients and stability of worm casts showed high values in all treatments. It means that worm casts are an excellent plant growth media source with a high chemical composition and their stability.

• 품질경영학회지
• /
• 제42권4호
• /
• pp.757-768
• /
• 2014

Purpose: In this paper we present a case study of developing fast curing adhesives for insulation material of LNG carriers using an extreme vertices design with four mixture components. Three material properties are considered - shear strength, viscosity, and tensile strength. In the optimization experiment, we used hardness instead of tensile strength due to shortage of specimens. Methods: We employ four-factor extreme vertices design with 19 runs and desirability function approach for simultaneously optimizing three responses. After selecting optimal condition of the mixture components, we do confirmation experiments to verify the reproducibility of the optimal condition under manufacturing circumstance. Results: Simultaneous optimal condition for the three responses, that is, shear strength, viscosity, and harness is obtained. At the optimal condition, confirmation experiments are executed in manufacturing circumstance. The variation for the shear strength is not satisfactory, which is due to the variation of the humidity. Conclusion: At the optimal condition three material properties are satisfactory. To reduce the variability for the shear strength, robust design is needed.

• Korean Chemical Engineering Research
• /
• 제48권6호
• /
• pp.763-767
• /
• 2010

본 연구에서는 가변부피 투시셀이 장착된 고압 상평형 장치를 사용하여 초임계 용매인 이산화탄소와 1-propanol의 기액 상평형 거동을 관찰하였다. 이산화탄소와 1-propanol 이성분계에 대하여 온도 305.15 K, 313.15 K, 323.15 K, 333.15 K와 압력 2~11 MPa 범위까지의 실험 결과를 압력-조성(P-x)과 압력-온도(P-T)의 평형 곡선으로 나타내었다. 온도가 증가함에 따라서 혼합물 임계압력도 증가하였고 이산화탄소와 1-propanol계 혼합물의 P-T 곡선은 전형적인 type-II의 유형을 나타내었다. Peng-Robinson 상태방정식을 이용하여 실험 결과를 적합하여 결정한 최적 파라미터 값은 각각 $k_{ij}=0.116$와 ${\eta}_{ij}=-0.065$이였으며 Peng-Robinson 상태방정식에 적용하여 계산된 예측치는 실험결과와 비교적 좋은 일치를 보였다.

• Bulletin of the Korean Chemical Society
• /
• 제30권11호
• /
• pp.2806-2808
• /
• 2009

• Bulletin of the Korean Chemical Society
• /
• 제19권12호
• /
• pp.1306-1309
• /
• 1998

• 한국세라믹학회지
• /
• 제29권12호
• /
• pp.990-996
• /
• 1992

Chemical vapor deposition of ATO from SnCl4-SbCl5-H2O gas mixture was investigated with thermodynamic and experimental analyses. Electrical conductivity of the ATO film was much improved under deposition conditions of low input-gas ratio, Psbcl5/Psbcl4. This increase of the conductivity was attributed to donor electrons produced mainly by the pentavalent Sb ions in SnO2 lattice. However high input-gas ratio conditions produced an ATO film consisting of a mixture of SnO2 and very fine Sb2O5 phase. It was found that the deterioration of electrical conductivity and optical transmission of the film was caused by the deposition of fine Sb2O5 phase in the SnO2 matrix.

• 한국자동차공학회논문집
• /
• 제23권2호
• /
• pp.214-220
• /
• 2015

Since resources of fossil fuels are limited, development of alternative energies is emphasized and research on new-regenerative energy is actively in progress worldwide. In present research, physical and chemical characteristics of mixed fuel are analyzed in detail for the different mixture rate of conventional and bio-diesel and ultrasonic irradiation time. Experimental setup consists of ultrasonic generator, vibrator, horn, and reflector. Various physical and chemical characteristics of fuel are investigated for volumetric mixture rate of bio-diesel from 0 to 100%. As results, viscosity and surface tension is increased as mixture rate of bio-diesel is increased. Also, molecular splits and reunions are increased and decreased repeatedly after some period of time as ultrasonic energy irradiation time is increased. As conclusion of experiments, Olefin rate, Branch index, and Aromatic rate are influenced by ultrasonic irradiation time.

• 대한화학회지
• /
• 제8권3호
• /
• pp.109-112
• /
• 1964

A volumetric method of the determination of calcium carbonate and calcium fluoride in fluorspar concentrate is described. The carbonate is converted into solution by treatment of the sample in HNO$_3$-acetone (l% by volume) mixture, and the fluoride by treating the residue with H$_3BO_3$-HCl mixture. The calcium in the solution is determined volumetrically using EDTA standard solution. The selective dissolution of calcium carbonate by HNO$_3$-acetone mixture is superior to Bidtel's acetic method and little correction for the dissolution of calcium fluoride is needed. Triethanolamine is found to be superior to KCN in masking heavy metal ions.

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2003년도 연료전지심포지움 2003논문집
• /
• pp.193-197
• /
• 2003

Mixture of $Ni(OH)_2-Mg(OH)_2$ used as the precurs was treated by mechnochemical(MC) and hand grinding process. Carbon nanofibers(CNF) were prepared using CVD process with the above prepared catalyst. CNFs with a uniform diameter were obtained with MC process treated catalyst, and the diameter could be controlled by tuning the grinding time. CNF bundles with close coalescence were produced with MC treated catalyst. After purification of CNFs and loading with Pt, they were used in fuel cell as the cathode catalyst support. The performance with carbon nanofibers prepared using ground mixture was found to be better than that prepared using unground mixture, which is attributed to the homogeneous CNFs with small diameter and specific interaction between Pt and CNFs.