• Bulletin of the Korean Chemical Society
• /
• v.8 no.4
• /
• pp.254-257
• /
• 1987

Palladium dichloro complexes catalysed the oxidation of cyclopentene by dioxygen in tetralin solvent at ambient temperature. Cyclopentanone formed mainly together with autoxidation products from both cyclopentene and tetralin. The oxidation seems to proceed by co-oxidation mechanism, where tetralin was first oxidized to its hydroperoxide which then oxidized cyclopentene to cyclopentanone. Mechanism of the other by-products formations has been discussed.

• Journal of the Korean Ceramic Society
• /
• v.22 no.6
• /
• pp.5-8
• /
• 1985

Graphite has been oxidized to graphite hydrogen sulfate in concentrated $H_2SO_4$. Anodic oxidation and chemical oxidation of graphite in $H_2SO_4$ generally leads to the formation of intercalation compounds of the ionic salt type through incorporation of $H_2SO_4^-$ions and $H_2SO_4$ molecules into the graphite. Several other reactions also accur at various points of the charging cycle. But there is no satisfactory kinetics and mechanism of intercalationin graphite. We have studied them with anodic oxidation and chemical oxidation. We found six distinct phenomena between 2nd stage and 1st stage in chemical oxidation. We examined them in detail by the following in the measurements electrical oxidation. X-ray diffractions UV-Vis spectroscopy density measurements. We could obtained a equation for kinetic according to the reaction rate from this results and mechanism of intercalation between 2nd stage and 1st stage with hydrogen sulfate in graphite. Three thesis were written for the mechanism of intercalation compounds in graphite with hydrogen sulfate ; first thesis is anodic oxidation second thesis is chemical oxidation and definition of transit phase between 2nd etc the third thesis is the kinetic mechanism of intercalation compounds in graphite with Hydrogen sulfate. This thesis is the first paper among three thesis as anodic oxidation.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.11 no.1
• /
• pp.32-55
• /
• 1975

The ammonium salt of N-Nitrosophenylhydroxiamine, namely Cupferron, is a well-known analytical reagent which precipitates a great number of metal ions in acid medium. Various structures of electrode reduction for N-Nitrosophenylhydroxiamine have been suggested in acid and alkaline media by many researchers, but not in neutral medium. So the mechanism of electrode reaction of Cupferron was investigated by both chronopotentiometric and polarographic methods. It was estimated that the reduction of Cupferron occurs in a three-step mechanism through which a chemical step is interposed between two charge transfer, the ECE (charge transfer-chemical reaction-charge transfer) mechanism, over a range of neutral and alkaline media. The chemical reaction of the process was assumed to be acid-base catalyzed from the fact that kapp (over all rate constant) of chemical reaction is pH dependent.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.11
• /
• pp.4095-4098
• /
• 2011

• Bulletin of the Korean Chemical Society
• /
• v.34 no.7
• /
• pp.2187-2190
• /
• 2013

• Journal of the Korean Chemical Society
• /
• v.62 no.5
• /
• pp.412-416
• /
• 2018

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.4
• /
• pp.487-493
• /
• 2010

There has been a controversy on the formation mechanism of $TiO_2$ nanotubes. This study was conducted to elucidate the formation mechanism of $TiO_2$ nanotubes. $TiO_2$ nanotubes were prepared by a hydrothermal method. $TiO_2$ nanotubes formation mechanism was investigated by controlling the formation time. It was found that $TiO_2$ nanotubes were formed by growing, not by wrapping of sheets. The phase structure of hydrogen titanate nanotubes was different from that of $TiO_2$ nanotubes. It is important to wash the sodium titanate nanotubes with an acidic solution to get hydrogen titanate nanotubes and then to calcine the hydrogen titanate nanotubes around $400^{\circ}C$ to obtain $TiO_2$ nanotubes.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.7
• /
• pp.1098-1105
• /
• 2007

Quantum mechanical and molecular dynamics simulation analysis has been performed on the model system for CALB (Candida antarctica lipase B) with esters to study the reaction mechanism and conformational preference of catalytic hydrolysis and the esterification reaction. Using quantum mechanical analysis, the ping-pong bi-bi mechanism was applied and energies and 3-dimensional binding configurations of the whole reaction pathways were calculated. Further molecular dynamics simulation analysis was performed on the basis of the transition state obtained from quantum mechanical study to observe the effect of structures of the substrates. Calculation results using substrates of different chain length and chiral configurations were compared for conformational preference. The calculated results showed very small influence on chain length, whereas chiral conformation showed big differences. Calculated results from molecular modeling studies have been compared qualitatively with the experimental data using racemic mixtures of (${\pm}$)-cis-4-acetamido-cyclopent-2-ene-1-ethyl acetate as substrates.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.3
• /
• pp.74-81
• /
• 2013

Due to its accuracy and efficiency, reduced kinetic mechanism of diesel surrogate is widely used as fuel model when applying 3-D diesel engine simulation. But for the well-developed prediction of diesel surrogate reduced kinetic mechanism, it is important to know some meaningful factors which affect to ignition delay time. Meanwhile, ignition delay time consists of two parts. One is the chemical ignition delay time related with the chemical reaction, and the other is the physical ignition delay time which is affected by physical behavior of the fuel droplet. Especially for chemical ignition delay time, chemical properties of each fuel were studied for a long time, but researches on their mixtures have not been done widely. So it is necessary to understand the chemical characteristics of their mixtures for more precise and detailed modeling of surrogate diesel oil. And it shows same ignition trend of paraffin mixture with those of single component, and shorter ignition delay at low/high initial temperature when mixing paraffin and toluene.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.12
• /
• pp.3738-3742
• /
• 2013

The reaction mechanism of $SiF_2$ radical with HNCO has been investigated by the B3LYP method of density functional theory(DFT), while the geometries and harmonic vibration frequencies of reactants, intermediates, transition states and products have been calculated at the B3LYP/$6-311++G^{**}$ level. To obtain more precise energy result, stationary point energies were calculated at the CCSD(T)/$6-311++G^{**}$//B3LYP/$6-311++G^{**}$ level. $SiF_2+HNCO{\rightarrow}IM3{\rightarrow}TS5{\rightarrow}IM4{\rightarrow}TS6{\rightarrow}OSiF_2CNH(P3)$ was the main channel with low potential energy, $OSiF_2CNH$ was the main product. The analyses for the combining interaction between $SiF_2$ radical and HNCO with the atom-in-molecules theory (AIM) have been performed.