• Title/Summary/Keyword: Chemical compositions

Search Result 1,829, Processing Time 0.034 seconds

Comparisons of Meat Quality Characteristics between Castration and Non-castration from Dairy Goats (거세 및 비거세 유산양고기의 품질특성 비교)

  • Kang, Geunho;Cho, Soohyun;Seong, Pilnam;Kang, Sunmun;Park, Kyoungmi;Park, Beomyoung;Kim, Donghun
    • Food Science of Animal Resources
    • /
    • v.33 no.1
    • /
    • pp.119-124
    • /
    • 2013
  • This study was conducted to investigate meat quality and sensory characteristics between castrated and non-castrated dairy goats. Dairy goat of Saanen breeds was slaughtered at an age of 6 mon. Then, characteristics of dairy goat meat were analyzed to chemical compositions, collagen content, pH, meat color, cooking loss, water-holding capacity, shear force, protein solubility, and myofibrillar protein fractions by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). Also, odor from dairy goat meats was analyzed by sensory evaluation and volatile substances by gas chromatography-mass spectrometry (GC-MS). As a result, the chemical compositions and physicochemical characteristics were not significantly different between castrated and non-castrated dairy goats meat. Also, there is no difference protein solubility (sarcoplasmic, myofibrillar and total protein) and protein fraction by SDS-PAGE. Sensory evaluation results in odour scores are highly (p<0.05) non-castration dairy goat meat better than castration. As a result, overall palatability was higher (p<0.05) in castrated goat meat when compared with non-castrated one. The indole and octadecanoic acid by GC-MS based on sensory evaluation results were only detected in non-castrated dairy goat meat. Therefore, distribution for goat meats castrated compared to non-castrated dairy goat meat is expected to be able to get a good response to the Korean consumer.

Physicochemical Comparison of Two Different Shark Meats Used for Preparation of Dombaeki (돔배기용 상어육의 이화학적 성분 비교)

  • Kim, Eun-Ok;Yu, Myeong-Hwa;Lee, Ki-Teak;Kim, Seon-Bong;Choi, Sang-Won
    • Food Science and Preservation
    • /
    • v.15 no.5
    • /
    • pp.711-718
    • /
    • 2008
  • Dombaeki, a traditional salted shark meat, has been widely used as a customary religious food in the Daegu-Gyeongbuk area of Korea. Two different sharks, Sphyrna zygaena (SZ) and Isurus oxyrinchus (IO) are traditionally used to prepare Dombaeki. Chemical components, lipid classes, fatty acid levels, and sterol compositions of meats prepared from the two sharks were investigated. There were no significant differences in chemical composition between the two dried shark meats. Major amino acids in shark meat were leucine, lysine, arginine, proline, isoleucine, valine, phenylalanine, glutamic acid, and asparagine, which together accounted for about 40% of total amino acids. Levels of amino acids in IO meat were higher than in SZ meat. Major fatty acids in the two shark meats were palmitic ($C_{16:0}$), stearic ($C_{18:0}$), oleic ($C_{18:1}$), arachidonic ($C_{20:4}$), and docosahexanoic (DHA, $C_{22:6}$) acids, which accounted for about 80% of total fatty acids. Notably, IO meat showed higher amounts of DHA (31.8%) and eicosapentanoic acid (EPA, 1.8%) than did SZ meat. The two shark meats showed similar dry weight levels of total lipids, with triacylglycerols, free fatty acids, sterols, and phospholipidscomprising on average 5.0, 2.0, 13.0 and 63.0% of total lipids, respectively. The dominant classes of phospholipids were mainly phosphatidylcholine (PC) and phosphatidylethanolamine (PE). PC content in the two shark meats was higher than that of PE, although the differencewas not great. The major fatty acids in phospholipids were myristic, palmitoleic, stearic, and docosanoic acids. Total volatile basic nitrogen content and the pH of SZ meat were lower than those of IO meat, whereas the Hunter's 'a' and 'b' values of SZ meat were higher than those of IO meat. These results suggest that shark meat may be useful as a functional food to prevent several degenerative diseases.

A Study on Production Kiln Site Estimation, based on Historical Ceramic Characteristics and Scientific Analysis of the Celadons Excavated From the Beopcheon Temple Site and Son-gok 2-ri 4th Kiln Site (법천사지 청자와 손곡2리 4호 가마터 청자의 도자사적 성격과 과학적 분석을 통한 생산 가마터 추정 연구)

  • Lee, Byeong-hoon;Yun, Seok-in
    • Korean Journal of Heritage: History & Science
    • /
    • v.47 no.3
    • /
    • pp.24-41
    • /
    • 2014
  • Since the celadons excavated from the Son-gok 2-ri 4th kiln site are located in the Beopcheon temple site and at close range, the similarity to the celadons excavated from the Beopcheon temple site is being raised. Thus, this study examined the correlation using a natural-scientific method. In this study, historical ceramic properties of total 19 celadons were examined and they were scientifically analyzed. First of all, according to the scientific analysis, chemical compositions of celadon clay showed a dispersed distribution at RO2 3.79-7.77mole and RO+R2O 0.33-0.49mole. When the microstructure was analyzed, most celadons excavated from the Beopcheon temple site, Wonju, which are estimated to be used in real life, had a favorable state, and some celadons from the Son-gok 2-ri 4th kiln site were found not to be glazed and sintered properly. When analyzing body crystalline phases of the celadons using the XRD method, quartz and mullite were extracted from all of the samples. And corundum was extracted from sg4 sample. Though firing temperature of each sample was different, they were mostly fired to temperatures between 1150 and $1200^{\circ}C$ and some of them experienced a low temperature of $1100^{\circ}C$ or a high temperature above $1200^{\circ}C$. Various chemical compositions and producing techniques were observed in the celadons from the Beopcheon temple site and Son-gok 2-ri 4th kiln site and it is hard to assure that the Son-gok 2-ri 4th kiln site was the production kiln site of the celadons used in the Beopcheon temple site. But according to the analysis of rare earth elements, some of the celadons from the Beopcheon temple site and Son-gok 2-ri 4th kiln site displayed a distribution pattern with certain regularity and this implies there is a possibility that the raw materials used in producing the ceramics might have come from the same origin. From the perspective of ceramic history, the celadons excavated from the Beopcheon temple site and Son-gok 2-ri 4th kiln site were produced using the same molding and sintering technique. Also, it is estimated that they were produced in the 12th or 13th century, judging from the overall shapes and patterns of the celadons.

Micromorphological Characteristics of Soil with Different Patent Materials (모재별 토양의 미세형태 특성)

  • Zhang, Yong-Seon;Jung, Seog-Jae;Kim, Sun-Kwan;Park, Chang-Jin;Jung, Yeon-Tae
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.37 no.5
    • /
    • pp.293-303
    • /
    • 2004
  • This experiment was conducted to investigate the direction or orientation of clay particle movement in argillic horizons (Bt) for clarifying the soil classification of soils. Soil samples were collected from 22 soil series containing Bt horizons. Physical and chemical characteristics and mineral and chemical compositions of clay in the soils were analyzed. Micoromorphological characteristics of the Bt horizons were also investigated with thin sections of the natural undisturbed and oriented soil samples. Average clay content in the Bt horizons was 28% and 1.33 times higher comparing to that in the surface layer. Soil pH was higher, but cation exchange capacity (CEC) and organic matter content were lower in Bt horizon than those in the surface layer. There was an evidence of clay accumulation in Bt horizons of all soil series examined except Bangog series. Although there was an increase of clay content in the horizons in Bangog series, the clay was not originated from illuviation process. The translocation of clay was in the order of an 2:1 expandable clay minerals > 2:1 non-expandable clay minerals > 1:1 clay minerals. The illuvial substances in argillic horizon were composed with clay, amorphous iron and opaque mineral. The micoromorphological features of Bt horizon were void coating, channel infilling and grain coating. There was an apparent boundary between clay coating and the groundmass in residuum and colluvium, but Bt horizon of alluvium was composed of a skew plane amputated by the physical operation.

Developing Advanced Total Recycling Method of FRP Boats (FRP선박의 일괄 재처리 방법의 개선)

  • Lee, Seung Hee;Yoon, Koo Young
    • Journal of the Korean Society for Marine Environment & Energy
    • /
    • v.16 no.1
    • /
    • pp.53-59
    • /
    • 2013
  • Since 1990s, the major recycling methods for mechanical recycling of FRP(Fiber Reinforced Plastics)boats has involved shredding and grinding of the scrap FRP in a new recycled product. But still it leads to secondary problem such as air pollution, unacceptable shredding noise level and few limited applications. This study is to propose a newly advanced method which is more efficient and environment friendly waste FRP regenerating system. As extracting FRP layer and making the recycled fiber for recycled-fiber reinforced concrete(RFRC) from waste FRP, the recycling process has some merits in a sense of the recycling energy and the environmental effects. In this study, for those tasks, spectro-chemical differentiation method and coloring water-soluble dye treatment makes the roving layer more distinguishable photophysically. Also that has remarkably reduced safety hazards and energy. Using the mechanical properties of polymers and composite, FRP with the orthotropic and laminated plastic structure has been easily separated in the new extracting system. Also the new method has introduced five kind of separating manuals for the some different compositions of FRP boats. The roving fiber of laminated glass-fiber layer is as good as the polyvinyl fiber which is cost-high commercial fiber to increasing strength of concrete products. The early study has shown the effectiveness of laminated glass-fiber layer which also is chemical-resistant due to the resin coating. These results imply that more efficient and environment friendly recycled glass fiber can be better applied to the fiber reinforced concrete(FRC) substitute and this study also has shown wide concrete applications with RFRC from the waste FRP boat.

Toughening of PLA stereocomplex by Impact modifiers (충격보강제에 의한 PLA stereocomplex의 강인화 연구)

  • Nam, Byeong-Uk;Lee, Bum-Suk
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.13 no.2
    • /
    • pp.919-925
    • /
    • 2012
  • We tried to blend PLLA and PDLA at overall compositions to form PLA stereocomplexes (SC). The presence of the SC crystalline phase in the PLLA matrix was verified by differential scanning calorimetry (DSC). As a result, a various PDLA composition of the PLA SC blends can influence PLA SC formation. And the largest amount of PLA SC crystallites was formed when PLLA/PDLA ratio is 50/50. In addition, we have tried to do PLA SC toughening with two impact modifiers in 92/8, 85/15 ratio of PLLA/PDLA to enhance the mechanical properties such as impact strength. Thermal and mechanical properties of PLA SC were investigated by DSC, HDT, Izod impact tester and UTM. PLA SC formation decreased when 10-20 wt% of Strong120 (impact modifier) was added. On the other hand, there is no effect on PLA SC formation when 10-20% of Elvaloy (impact modifier) was added. HDT values dramatically increased over $100^{\circ}C$ with the addition of PDLA. However, HDT decreased as Strong120 and Elvaloy content increased. Finally, we could find well balanced composition of toughened PLA SC with 10wt% of impact modifier in flexural modulus and impact strength.

A Molecular Dynamics Simulation Study of Na- and K-birnessite Interlayer Structures (Na-, K-버네사이트 층간 구조에 대한 분자동역학 시뮬레이션 연구)

  • Park, Sujeong;Kwon, Kideok D.
    • Korean Journal of Mineralogy and Petrology
    • /
    • v.33 no.3
    • /
    • pp.143-152
    • /
    • 2020
  • Birnessite is a layered manganese oxide mineral with ~7 Å of d-spacing. Because of its high cation exchange capacity, birnessite greatly impacts the chemical compositions of ground water and fluids in sediment pores. Understanding the cation exchange mechanisms requires atomistic investigations of the crystal structures and coordination environments of hydrated cations in the interlayer. In this study, we conducted classical molecular dynamics (MD) simulations, an atomistic simulation method of computational mineralogy, for triclinic Na-birnessite and K-birnessite whose chemical formula are from previous experiments. We report our MD simulation results of the crystal structures, coordination environments of Na+ and K+, and the polytypes of birnessite and compare them with available experimental results. The simulation results well reproduced experimental lattice parameters and provided atomic level information for the interlayer cation and water molecule sites that are difficult to distinguish in X-ray experiments. We also report that the polytype of the Mn octahedral sheets is identical between Na- and K-birnessite, but the cation positions differ from each other, demonstrating a correlation between the coordination environment of the interlayer cations and the crystal lattice parameters. This study shows that MD simulations are very promising in elucidating ion exchange reactions of birnessite.

Simultaneous Determination of Cholesterol, Bile Acids and Sterols in Human Bile Juices and Gallstones Using GC/MS (GC/MS에 의한 담석과 담즙내의 Cholesterol, Bile Acids 및 Sterols의 동시 Profiling)

  • Yang, Yoon Jung;Lee, Seon Hwa;Kim, Hyun Joo;Chung, Bong Chul
    • Journal of the Korean Chemical Society
    • /
    • v.42 no.3
    • /
    • pp.266-276
    • /
    • 1998
  • Cholesterol supersaturation in bile, which causes gallstone formation, is the result of low bile acid secretion or high cholesterol secretion. The quantitative analysis of cholesterol, bile acids and sterols which are precursors of cholesterol have been used to examine the changes in bile component. We described a simple, sensitive and reproducible method for simultaneous determination of cholesterol, five bile acids and seven sterols in human bile juices and gallstones by capillary column gas chromatography-mass spectrometry (GC/MS). Clinical samples were hydrolyzed by alcoholic KOH, extracted twice (pH 14 and 1) and derivatized to trimethylsilyl (TMS) ether with $MSTFA/NH_4I$ (N-methyl-N-trimethylsilyltrifluoroacetamide/ammonium iodide) mixture in order to be detected on the GC/MS. The good quality control data were obtained through within-a-day and day-to-day test (RSD values were 1.72-13.79, 0.68-14.10, respectively) and the recovery range of them was 73.56-96. 95 Using this method, biliary and gallstone compositions in the patients with intrahepatic stones were analyzed. The amounts and its relative distribution of cholesterol, bile acids and sterols showed different pattern in bile juices and gallstones.

  • PDF

2-Hexylthieno[3,2-b]thiophene-substituted Anthracene Derivatives for Organic Field Effect Transistors and Photovoltaic Cells

  • Jo, So-Young;Hur, Jung-A;Kim, Kyung-Hwan;Lee, Tae-Wan;Shin, Ji-Cheol;Hwang, Kyung-Seok;Chin, Byung-Doo;Choi, Dong-Hoon
    • Bulletin of the Korean Chemical Society
    • /
    • v.33 no.9
    • /
    • pp.3061-3070
    • /
    • 2012
  • Novel 2-hexylthieno[3,2-b]thiophene-containing conjugated molecules have been synthesized via a reduction reaction using tin chloride in an acidic medium. They exhibited good solubility in common organic solvents and good self-film and crystal-forming properties. The single-crystalline objects were fabricated by a solvent slow diffusion process and then were employed for fabricating field-effect transistors (FETs) along with thinfilm transistors (TFTs). TFTs made of 5 and 6 exhibited carrier mobility as high as 0.10-0.15 $cm^2V^{-1}s^{-1}$. The single-crystal-based FET made of 6 showed 0.70 $cm^2V^{-1}s^{-1}$ which was relatively higher than that of the 5-based FET (${\mu}=0.23cm^2V^{-1}s^{-1}$). In addition, we fabricated organic photovoltaic (OPV) cells with new 2-hexylthieno [3,2-b]thiophene-containing conjugated molecules and methanofullerene [6,6]-phenyl C61-butyric acid methyl ester ($PC_{61}BM$) without thermal annealing. The ternary system for a bulk heterojunction (BHJ) OPV cell was elaborated using $PC_{61}BM$ and two p-type conjugated molecules such as 5 and 7 for modulating the molecular energy levels. As a result, the OPV cell containing 5, 7, and $PC_{61}BM$ had improved results with an open-circuit voltage of 0.90 V, a short-circuit current density of 2.83 $mA/cm^2$, and a fill factor of 0.31, offering an overall power conversion efficiency (PCE) of 0.78%, which was larger than those of the devices made of only molecule 5 (${\eta}$~0.67%) or 7 (${\eta}$~0.46%) with $PC_{61}BM$ under identical weight compositions.

Synthesis of Borosilicate Zeotypes by Steam-assisted Conversion Method (수증기 쪼임법에 의한 제올라이트형 보로실리케이트 제조방법)

  • Mansour, R.;Lafjah, M.;Djafri, F.;Bengueddach, A.
    • Journal of the Korean Chemical Society
    • /
    • v.51 no.2
    • /
    • pp.178-185
    • /
    • 2007
  • Intermediate pentasil borosilicate zeolite-like materials have been crystallized by a novel method named steam-assisted conversion, which involves vapor-phase transport of water. Indeed, amorphous powders obtained by drying Na2O.SiO2.B2O3.TBA2O gels of various compositions using different boron sources are transformed into crystalline borosilicate zeolite belonging to pentasil family structure by contact with vapors of water under hydrothermal conditions. Using a variant of this method, a new material which has an intermediate structure of MFI/MEL in the ratio 90:10 was crystallized. The results show that steam and sufficiently high pH in the reacting hydrous solid are necessary for the crystallization to proceed. Characterization of the products shows some specific structural aspects which may have its unique catalytic properties. X-ray diffraction patterns of these microporous crystalline borosilicates are subjected to investigation, then, it is shown that the product structure has good crystallinity and is interpreted in terms of regular stacking of pentasil layers correlated by inversion centers (MFI structure) but interrupted by faults consisting of mirror-related layers (MEL structure). The products are also characterized by nitrogen adsorption at 77 K that shows higher microporous volume (0.160 cc/g) than that of pure MFI phase (0.119 cc/g). The obtained materials revealed high surface area (~600 m2/g). The infrared spectrum reveals the presence of an absorption band at 900.75 cm-1 indicating the incorporation of boron in tetrahedral sites in the silicate matrix of the crystalline phase.