• Journal of the Korean institute of surface engineering
• /
• v.54 no.4
• /
• pp.209-214
• /
• 2021

As coffee consumption per person increases annually to 323 cups in 2018, treating the spent coffee ground has arisen because spent coffee ground results in soil and air pollution. The demands of air purification filters are increasing more and more because the air pollution due to the fine dust has become worse. The spent coffee grounds had a porous structure, however, the pore was blocked by organic oil compounds. Electrocoagulation, which is one of the electrochemical methods, has the potential to remove the organic compounds. The surface area of spent coffee grounds increased effectively after the electrocoagulation treatment, and surface morphology and surface area were confirmed using SEM and BET, respectively. Using the FT-IR, both the spent coffee grounds and the electrocoagulated spent coffee grounds were characterized. The filter characteristics were examined by the adsorption test using formaldehyde, one of the air pollutants.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.1
• /
• pp.37-43
• /
• 2022

In this study, we investigated the optical, electrical and exothermic characteristics of ITO/Ag/ITO multilayer structures prepared with various Ag thicknesses on quartz and PI substrates. The transparent conducting properties of the ITO/Ag/ITO multilayer films depended on the thickness of the mid-layer metal film. The ITO/Ag (14 nm)/ITO showed the highest Haccke's figure of merit (FOM) of approximately 19.3×10^-3 Ω^-1. In addition, the exothermic property depended on the substrate. For an applied voltage of 3.7 V, the ITO/Ag (14 nm)/ITO multilayers on quartz and PI substrates were heated up to 110℃ and 200℃, respectively. The bending tests demonstrated a comparable flexibility of the ITO/Ag/IT multilayer to other transparent electrodes, indicating the potential of ITO/Ag/ITO multilayer as a flexible transparent conducting heater.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.34 no.1
• /
• pp.1-7
• /
• 2024

Objectives: The study was performed to investigate characteristics of hazardous factors regarding chemical(liquid lime) tank dredging workers by case survey. Methods: Field data such as working condition, MSDS and respirators applied to chemical tank dredging work were analyzed and the work environmental factors of noise and indoor air quality were measured to compare existing data with actual work situations. Results: No health hazards to workers due to working conditions were confirmed during dredging work inside the chemical storage tank. All air quality measurement data during dredging work satisfied the management standards, and there were no by-products. During dredging work, there was a significant change in noise depending on the type of work, but considering the noise reduction rate(NRR) of the earplugs worn by workers, there was no actual health hazard due to noise exposure. Conclusions: A fit test for respirator and the expiration date of the safety helmet should be observed to ensure an appropriate level of safety and health for dredging workers in the chemical storage tank.

• Korean Chemical Engineering Research
• /
• v.55 no.5
• /
• pp.698-703
• /
• 2017

Bubble flow characteristics in fluidized beds were analyzed by CPFD simulation. A fluidized bed, which had the size of $0.3m-ID{\times}2.4m-high$, was modeled by commercial CPFD $Barracuda^{(R)}$. Properties of bed material were $d_p=150{\mu}m$, ${\rho}_p=2,330kg/m^3$, and $U_{mf}=0.02m/s$. Gas was uniformly distributed and the range of superficial gas velocity was 0.07 to 0.16 m/s. Two other geometries were modeled. The first was a three-dimensional model, and the other was a two-dimensional model of $0.01m{\times}0.3m{\times}2.4m$. Bubble size and rising velocity were simulated by axial and radial position according to superficial gas velocity. In the case of three-dimensional model, simulated bubble rising velocity was different from correlations, because there was zigzag motion in bubble flow, and bubble detection was duplicated. To exclude zigzag motion of bubble flow, bubble rising velocity was simulated in the two-dimensional model and compared to the result from three-dimensional model.

• Food Science and Preservation
• /
• v.4 no.3
• /
• pp.287-293
• /
• 1997

This study was investigated to viscosity, color, chemical properties, and lipid and fatty acid composition for examination of physical and chemical characteristics of sesame oils. Yield of sesame oil was higher in Ansan sesame than that of Chinese and Dambaek sesame. Viscosity of sesame oils was higher than that of shame oils from Dambaek and Chinese sesame, but turbidity and sedimentation rate were higher in Dambaek's sesame oil than those of Ansan's and Chinese sesame oils. In the acid value, saponification value and iodine value of sesame oils, and chemical characteristics of Dambaek's sesame oil were better than those of the others. The neutral, glycolipid and phosholipid contents of sesame oils were 91.1∼92.1, 2.5∼3.5 and 5.5∼6.4%, respectively. The major fatty acids of sesame oils were oleic, linoleic palmitic and stearic acid. The content of oleic acid was higher in Dambaek's and Ansan's sesame oil than that of Chinese sesame oil, and the content of linoleic acid was higher in Chinese sesame oil than the others. The fatty acid composition of neutral lipid, glycolipid and phospholipid were similar to those of total lipid. The ratio of unsaturated fatty acid and saturated fatty acid was higher in Korean sesame oils than those in Chinese sesame oil. The mineral(Mg, Cu, Fe, In, Al, Mn) content of Korean sesame oils was higher than that of Chinese sesame oil. and heavy metals(Cu, Ag, Pb, Cd, As) were not detected.

• The Korean Journal of Ecology
• /
• v.20 no.6
• /
• pp.413-421
• /
• 1997

Ecological characteristics of Rumex acetosella have been studied both in the laboratory and in the field. R. acetosella grows well straight up after germination, elongating and thickening their rhizomes with sprouts erupting along their bodies of the rhizome. The number and development of leaves and ramets reach their peak by April. The size of leaves and the cover degree of the plant increase from April to May. R. acetosella is an ephemeral, a short life mode plant, finishing its life cycle in July or August. The germination and seedling growth of selected species exposed to aqueous extracts of R. acetosella were in inverse proportion to concentration. The growth of Rumex japonicus and Digitaria sanguinalis cultivated in soil with R. acetosella was more inhibited than that of the control. Twelve chemical compounds were identified from R. acetosella by GC and HPLC and verified by bioassay with the same chemical reagents. It would be assdumed that these chemical substances are responsible for the allelopathic effect of R. acetosella. In short, R. acetosella plants grow vigorously from April and maintain their superior competitive ability to other plants in forming their communities by emitting chemical substances into their environment.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.4
• /
• pp.393-401
• /
• 2011

Natural Curcumin belongs to Zingiber Officinale Roscoe was known to possess natural odor, natural taste, natural color, and other pharmaceutical & chemical characteristics. Natural Curcumin extract was made to use ethanol as a solvent was to show a yellow color having state of solid powder and an active component. Natural Curcumin extract tested pharmaceutical & chemical experiment to dilute in curcumin 1%-water solution. Curcumin extract tested antimicrobial experiment using microbe, and tested dye experiment using fiber. Some conclusions in the result of characteristics experiment was obtained as follow. The result of antimicrobial experiment showed that the growth of staphylococcus aureus (ATCC-001) and aspergillus niger (ATCC-002) as microbes decreased according to passage of time. This phenomenon could know that Curcumin compoment showed influence to antimicrobial effect. Also, the result of dye experiment showed that cotton and sick with fiber dyeing dyed in direction of dark yellow color. This phenomenon could know that Curcumin extract showed influence to dyeing effect in observation of optical electron microscope(OEM.) The result of instrument analysis ascertained inorganic components of K(53.300ppm), Na(1.150ppm), Ca(0.711ppm), Ti(0.351ppm), Li(0.256ppm), Cu(0.233ppm) etcs from Curcumin component with ICP/OES, and ascertained organic components of propanoic acid(1.859), benzene(10.814), phenol(14.194) etcs from Curcumin component with GC/MSD.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.4
• /
• pp.303-308
• /
• 2005

In this paper, the effects of oxidants on tungsten chemical mechanical polishing (CMP) process were investigated using three different oxidizers such as Fe(NO₃)₃, KIO₃ and H₂O₂. Moreover, the interaction between the tungsten film and the oxidizer was discussed by potentiodynamic polarization measurement with three different oxidizers, in order to compare the effects of W-CMP and electrochemical characteristics on the tungsten film as a function of oxidizer. As an experimental result, the tungsten removal rate reached a maximum at 5 wt％ Fe(NO₃)₃concentration, and when 5 wt％ H₂O₂was added in the slurry, the removal rate of W increased. Also, the microstructures of surface layer by atomic force microscopy(AFM) image were greatly influenced by the slurry chemical composition of oxidizers. It was shown that the surface roughness and removal rate of the polished surface were improved in Fe(NO₃)₃than KIO₃. The electrochemical results indicate that the corrosion current density of the 5 wt％ H₂O₂ and 5 wt％ H₂O/sub 2+/＋ 5 wt％ Fe(NO₃)₃was higher than the other oxidizers. Therefore, we conclude that the W-CMP characteristics are strongly dependent on the kinds of oxidizers and the amounts of oxidizer additive.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.6 no.3
• /
• pp.183-188
• /
• 2001

The deposition behavior and photoelectric response characteristics of chlorophyll a(Chl a) monolayers and multilayers were investigated under various film fabrication conditions. Chl a LB films were deposited onto quartz and pretreated ITO glass substrates under several fabrication conditions, including surface pressure and number of layers. The absorption spectra of Chl a in a solution state and solid-like state (LB films) were fairly consistent with each other, and two absorption peaks were found at 678 and 438nm, respectively. The prepared Chl a LB films were set into an electrochemistry cell equipped with a Pt plate as the counter electrode, and the photoelectric response characteristics were obtained and analyzed relative to the light illumination. By considering the resulting photocurrents, the optimal fabrication conditions for Chl a LB films were determined as 20mN/m of surface pressure and 20 layers. The action spectrum of the Chl a LB films was obtained in the visible region, and was found to be in good agreement with the absorption spectrum. The possible application of the proposed system as a constituent of an artificial color recognition device was suggested based on combining with the photoelectric conversion property of another light-sensitive biological pigment.

• Korean Chemical Engineering Research
• /
• v.48 no.6
• /
• pp.737-740
• /
• 2010

High leakage current and threshold voltage shift(${\Delta}Vth$) are demerits of a-Si:H TFT. These characteristics are influenced by gate insulator and active layer film quality, surface roughness, and process conditions. The purpose of this investigation is to improve off current($I_{off}$) and ${\Delta}V_{th}$ characteristics. Nitrogen-rich deposition condition was applied to gate insulator, and hydrogen-rich deposition condition was applied to active layer to reduce electron trap site and improve film density. $I_{off}$ improved from 1.01 pA to 0.18 pA at $65^{\circ}C$, and ${\Delta}V_{th}$ improved from -1.89 V to 1.22 V.