• Elastomers and Composites
• /
• 제36권1호
• /
• pp.52-60
• /
• 2001

발포체의 물성은 발포체의 밀도, 사용된 폴리머의 기계적 물성과 열린 셀(open cell) 함량, 셀 크기, 셀 크기 분포, 셀 형태, 격벽의 두께 등을 포함하는 셀 구조에 의존하며 이러한 발포체의 밀도는 사용된 폴리머의 종류와 가교제의 농도, 발포제의 농도 그리고 가공 기술 및가공 조건 같은 다양한 원료물질과 가교조건에 영향을 받는다. Ethylene vinyl acetate coplymer (EVA) 발포체는 가교 발포체로서 가교속도와 발포제의 분해속도에 의해 발포특성에 영향을 받으며 이에 따라 발포체 물성에도 영향을 미친다. 본 연구에서는 가공 온도인 $155^{\circ}C$에서의 시간에 따른 발포제의 분해 속도 차이와 이에 따른 발포특성과 발포체의 물성에 대한 영향을 평가하였다. 발포제 분해 속도가 보다 느린 경우, 발포제 분해속도가 빠른 경우와 비교하여 낮은 밀도를 보여주었으며, 우수한 충격흡수성을 나타내었고 발포체의 셀 크기는 보다 균일하였다.

• 한국식품저장유통학회지
• /
• 제4권3호
• /
• pp.287-293
• /
• 1997

This study was investigated to viscosity, color, chemical properties, and lipid and fatty acid composition for examination of physical and chemical characteristics of sesame oils. Yield of sesame oil was higher in Ansan sesame than that of Chinese and Dambaek sesame. Viscosity of sesame oils was higher than that of shame oils from Dambaek and Chinese sesame, but turbidity and sedimentation rate were higher in Dambaek's sesame oil than those of Ansan's and Chinese sesame oils. In the acid value, saponification value and iodine value of sesame oils, and chemical characteristics of Dambaek's sesame oil were better than those of the others. The neutral, glycolipid and phosholipid contents of sesame oils were 91.1∼92.1, 2.5∼3.5 and 5.5∼6.4%, respectively. The major fatty acids of sesame oils were oleic, linoleic palmitic and stearic acid. The content of oleic acid was higher in Dambaek's and Ansan's sesame oil than that of Chinese sesame oil, and the content of linoleic acid was higher in Chinese sesame oil than the others. The fatty acid composition of neutral lipid, glycolipid and phospholipid were similar to those of total lipid. The ratio of unsaturated fatty acid and saturated fatty acid was higher in Korean sesame oils than those in Chinese sesame oil. The mineral(Mg, Cu, Fe, In, Al, Mn) content of Korean sesame oils was higher than that of Chinese sesame oil. and heavy metals(Cu, Ag, Pb, Cd, As) were not detected.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2003년도 추계학술발표논문집
• /
• pp.291-305
• /
• 2003

In this work we developed the closed-loop model of a paper machine during grade change with the intention to provide a reliable dynamic model to be used in the model-based grade change control scheme. During the grade change, chemical and physical characteristics of paper process change with time. It is very difficult to represent these characteristics on-line by using physical process models. In this work, the wet circulation part and the drying section were considered as a single process and closed-loop identification technique was used to develop the grade change model. Comparison of the results of numerical simulations with plant operation data demonstrates the effectiveness of the model identified.

• 펄프종이기술
• /
• 제35권5호
• /
• pp.46-52
• /
• 2003

In this work we developed the closed-loop model of a paper machine during grade change with the intention to provide a reliable dynamic model to be used in the model-based grade change control scheme. During the grade change, chemical and physical characteristics of paper process change with time. It is very difficult to represent these characteristics on-line by using physical process models. In this work, the wet circulation part and the drying section were considered as a single process and closed-loop identification technique was used to develop the grade change model. Comparison of the results of numerical simulations with mill operation data demonstrates the effectiveness of the model identified.

• 한국안전학회지
• /
• 제18권4호
• /
• pp.85-91
• /
• 2003

In this study, We have investigated leaching characteristics of heavy metals for recycled plastic composites containing EAF(Electric Arc Furnace) dust & EAF slag. EAF dust & EAF slag used that is generated in the 3 steel-making compaines in domestic. The physical and chemical properties of EAF dust & slag was examined by measuring specific surface area. porosity, oil absorption test and chemical wetting analysis etc. Results of total analysis indicated that EAF dust, slag contained significant amount of hazardous metals such as Cu, Pb, Cd and Cr. But, In the leaching test of the recycled plastic composites containing EAF dust, slag by Korean Standard Leaching Procedure, composites shows much lower leaching concentration of heavy metals. It was concluded that the recycled plastic composites containing EAF dust, slag showed good physical and chemical characteristics. This means that the EAF dust, slag can be effectively used as a functional filler.

• 한국재료학회지
• /
• 제24권12호
• /
• pp.682-688
• /
• 2014

Physical and chemical changes in a polished wafer and in $2.5{\mu}m$ & $4{\mu}m$ epitaxially grown Si layer wafers (Epilayer wafer) after surface treatment were investigated. We characterized the influence of surface treatment on wafer properties such as surface roughness and the chemical composition and bonds. After each surface treatment, the physical change of the wafer surface was evaluated by atomic force microscopy to confirm the surface morphology and roughness. In addition, chemical changes in the wafer surface were studied by X-ray photoemission spectroscopy measurement. Changes in the chemical composition were confirmed before and after the surface treatment. By combined analysis of the physical and chemical changes, we found that diluted hydrofluoric acid treatment is more effective than buffered oxide etching for $SiO_2$ removal in both polished and Epi-Layer wafers; however, the etch rate and the surface roughness in the given treatment are different among the polished $2.5{\mu}m$ and $4{\mu}m$ Epi-layer wafers in spite of the identical bulk structural properties of these wafers. This study therefore suggests that independent surface treatment optimization is required for each wafer type, $2.5{\mu}m$ and $4{\mu}m$, due to the meaningful differences in the initial surface chemical and physical properties.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.79-86
• /
• 2018

Although the intrinsic characteristics of DNA molecules and carbon nanotubes (CNT) are well known, fabrication methods and physical characteristics of CNT-embedded DNA thin films are rarely investigated. We report the construction and characterization of carboxyl (-COOH) group-modified multi-walled carbon nanotube (MWCNT-COOH)-embedded DNA and cetyltrimethyl-ammonium chloride-modified DNA (DNA-CTMA) composite thin films. Here, we examine the structural, compositional, chemical, spectroscopic, and electrical characteristics of DNA and DNA-CTMA thin films consisting of various concentrations of MWCNT-COOH. The MWCNT-COOH-embedded DNA and DNA-CTMA composite thin films may offer a platform for developing novel optoelectronics, energy harvesting, and sensing applications in physical, chemical, and biological sciences.

• 한국자동차공학회논문집
• /
• 제23권2호
• /
• pp.214-220
• /
• 2015

Since resources of fossil fuels are limited, development of alternative energies is emphasized and research on new-regenerative energy is actively in progress worldwide. In present research, physical and chemical characteristics of mixed fuel are analyzed in detail for the different mixture rate of conventional and bio-diesel and ultrasonic irradiation time. Experimental setup consists of ultrasonic generator, vibrator, horn, and reflector. Various physical and chemical characteristics of fuel are investigated for volumetric mixture rate of bio-diesel from 0 to 100%. As results, viscosity and surface tension is increased as mixture rate of bio-diesel is increased. Also, molecular splits and reunions are increased and decreased repeatedly after some period of time as ultrasonic energy irradiation time is increased. As conclusion of experiments, Olefin rate, Branch index, and Aromatic rate are influenced by ultrasonic irradiation time.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1998년도 추계 학술대회논문집
• /
• pp.211-219
• /
• 1998

Propellants pressurized and fed into the combustion chamber undergoes the mechanical, chemical combustion processes. Along with their distinctive physical characteristics, propellant combustion is typically divided into the processes; injection, atomization, mixing, vaporization and chemical reaction. These processes assumed to happen in a serial manner are strongly coupled, thereby involves formidable physical complexities. In this study a numerical experiment is attempted to simulate the burning sprays due to OFO, FOF triplet / FOOF split doublet injectors. Based on Eulerian-Lagrangian frame, Navier-Stokes equation system for compressible flows is preconditioned with low Reynolds number $k-{\varepsilon}$ turbulent model and time-integrated by LU-SGS, and the sprays are described by DSF model with the characteristics initialized by experimentally determined spray characteristics. Simplified single global reaction model approximates heptane-air reaction. It was observed that FOOF split doublet injector shows better atmization with shortest residence and the FOF triplet injector produces better combustion performance.

• 환경영향평가
• /
• 제19권2호
• /
• pp.127-140
• /
• 2010

This study investigates the relation between the location of a habitat and the ecological connections according to the habitat type in the riparian zone at the Nonsan Stream and Yanghwa Stream. Stream habitat is classified into nine types for the aquatic insects and fish. For vegetation and birds, habitat is classified into two types of medium-scale streams, including both physical and chemical streams are analyzed accordingly. Nowadays, The fundamental goal of the river environment restoration enterprise is the rehabilitation or the restoration of the characteristic the river scenic or environment. For instance, The Channel habitats which has physical nature environment such as flat, speedy rapids, or closed-channel wetland, pool are constructed by artificial, Consequently, make them autogenesis smoothy eco-environment. However, the river environment are controlled not only physical environment, but it also need reasonable the quality of the water to compose smoothly. Finally, understanding what influence are effecting on physical habitat environment which are made by natural factors to water quality are very important factor for the river environment restoration enterprise Therefore, In this research, we are targeting to a basin to investigate the environment of the physical channel habitat and evaluate the changing of the water quality. This results will be a important characteristic that can judge the physical habitat and reciprocality connected to the water quality or adequacy of restoration technology. Therefore in this study, as a step to quantify functions and values of habitats and definite factors to perform habitat, we selected a representative stream of sand-stream, gravel-stream to classify habitat characteristics and quantified the physical, chemical, biological characteristics.