• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.6
• /
• pp.463-471
• /
• 2000

A pot experiment was carried out to find out the effects of the sludge application on corn and Chinese cabbage growth and changes in soil chemical properties with sludges collected from 4 plants at 0, 12.5, 25, 50, and $100Mg\;ha^{-1}$ levels and chemical fertilizer. With the corn experiment, the pot where sludge and chemical fertilizers were treated together, greater amount of sludge resulted in initial growth inhibition. In general, higher sludge treatment rates resulted in better growth in the end, whereas initial growth was inhibited due to high the electrical conductivity of saturated extracts(ECe) for the Chinese cabbage. However, the highest yield among sludge treatments was lower than the yield with chemical fertilizers. While the treatments resulted in chemical changes in soil showing differences of cation exchange capacity, organic matter contents, and nitrogen contents, hardly any changes were detected before and after crops were grown. Inorganic nutrients such as Na, K, Ca and Mg showed similar changes. The ECe in soil saturation extract decreased after crops were grown. The more sludge was treated, the greater was the decrease. The differences of ECe in the soil saturation extract with varying degrees of treatment were also reduced after crops were grown. Available phosphorus content increased during growth. Due to the low nitrogen content in sludge, when nitrogen becomes the determining factor for the amount of sludge treatment, phosphorus buildup resulted from continued application of sludge could be raised. Therefore, it is advisable to use phosphorus, not nitrogen content, in determining the amount of sludge treatment and chemical fertilizer as supplementary sources for nitrogen.

• Asian Journal of Turfgrass Science
• /
• v.8 no.2
• /
• pp.93-100
• /
• 1994

This experiment was carried our in order to study effect of alum sludge compost of water treat-ment plant on the growth of Korean lawngrass (zoysia japonica Steud.) and on the change of soil chemical properties. Alum sludge compost was made out of chicken feces, sawdust and alum sludge. The results obtained are summarized as follows : 1. Alum sludge compost was appropriate for organic fertilizer of turfgrass management in golf course. 2.Application of alum sludge compost improved the chemical properties of soil such as pH, available phosphorous and exchangeable calcium. Also the growth of Korean lawngrass grown by the mixed application of alum and compost was more effective than that in single application of compost. 3.Chlorophyll content of Korean lawngrass had no differences in several treatments. 4. Alum promoted the uptake of potassium, calcium and the yield of dry weight hut the yield of dry weight was not affected by chemical fertilizer. 5.Alumimum toxicity was decreased by the mixed application of alum and compost but increased by single application of alum.

• Journal of the Korean Applied Science and Technology
• /
• v.9 no.1
• /
• pp.31-40
• /
• 1992

This study is on the biodegradability of the activated sludge, which used to biodegrade Linear Alkylbenzene Sulfonate(LAS), synthetic detergents and sufactants. The activated sludge in waste water treatment plant is used to the test of biodegradation of anionic surfactants and nonionic surfactants, but it have the periodic change of the biological propety to the lapse of the time. For the puropse of controlling and adjusting of the activated sludge in biodegradation test, we collected microorganisms from the sewage plant and the soil, and then, made the activated sludge in semicontinuous aeration chamber. From determined biodegradation data, and the degree of biodegradability to the LAS, we confirmd the standardized synthetic activated sludge which have more stable biodegradability than the sewage activated sludge. In continuous biodegradation test, LAS(dodecene-1) was biodegraded more than 99%, In 7days by the standardized activated sludge.

• KSBB Journal
• /
• v.25 no.1
• /
• pp.41-46
• /
• 2010

In this study, we found that dewatering properties were related with physico-chemical properties such as sludge concentration, pH, and zeta potential with sewage sludge, Ionic contents in digested sludge were in the order of $Ca^{2+}$ (14.2 mg/g) > $Mg^{2+}$ (1.9 mg/g) > $Na^+$ (1.4 mg/g) > $K^+$ (1.0 mg/g). Divalent ion more than monovalent have influenced on physico-chemical and dewatering properties. Floc size distribution in activated (AS) and digested sludge (DS) increased on lower pH range to be near isoelectric point and than specific resistance to filtration (SRF) decreased. A linear increase in SRF ($5.25\times10^{13}\sim2.86\times10^{14}$ m/kg in AS and $6.89\times10^{14}\sim1.09\times10^{15}$ m/kg in DS) was observed throughout low concentration range of 1230~9960 mg/L in AS and 2700~5400 mg/L in DS.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.1
• /
• pp.35-45
• /
• 2023

In this study, the sludge formation in the wastewater drain from the advanced packaging process mechanisms are revealed as well as the key factors, materials, and sludge prevention methods using surfactant. Compared with that of conventional packaging process, advanced packaging process employ similar process to the semiconductor fabrication process, and thus many processes may generate wastewater. In specific, a large amount of wastewater may generate during the carrier wafer bonding, photo, development, and carrier wafer debonding processes. In order to identify the key factors for the formation of sludge during the advanced packaging process, six types of chemicals including bonding glue, HMDS, photoresist (PR), PR developer, debonding cleaner, and water are utilized and mixing evaluation is assessed. As a result, it is confirmed that the black solid sludge is formed, which is originated by the sludge seed formation by hydrolysis/dehydration reaction of HMDS and sludge growth via hydrophobic-hydrophobic binding with sludge seed and PR. For the sludge prevention investigation, three surfactants of CTAB, PEG, and shampoo are mixed with the key materials of sludge, and it is confirmed that the sludge formations are successfully suppressed. The underlying mechanism behind the sludge formation is that the carbon tails of the surfactant bind to PR with hydrophobic-hydrophobic interaction and inhibit the reaction with HMDS-based slurry seeds to prevent the sludge formation. In this regard, it is expected that various problems like clogging in drains and pipes during the advanced packaging process may effectively solve by the injection of surfactants into the drains.

• Journal of Soil and Groundwater Environment
• /
• v.19 no.1
• /
• pp.46-53
• /
• 2014

The purpose of this study is to promote utilization of paper mill sludge as an adsorbent for stabilizing heavy metals in contaminated water by measuring the adsorption capacity of paper mill sludge for cadmium and arsenic. To measure adsorption capacity of paper mill sludge, sorption isotherm experiments were analyzed by Langmuir and Freundlich isotherm models. Also, two methods of chemical modifications were applied to improve the adsorption capacities of paper-mill-sludge: the first method used sodium hydroxide (NaOH), called PMS-1, and the second method used the NaOH and tartaric acid ($C_4H_6O_6$) together, called PMS-2. For Cd adsorption, PMS-1 presented the increase of reactivity while PMS-2 presented the decline of reactivity compared to that of untreated paper-mill-sludge. In case of As adsorption, both PMS-1 and PMS-2 showed the decrease of adsorption capacities. This is because zeta-potential of paper mill sludge was changed to more negative values during chemical modification process due to the hydroxyl group in NaOH and the carboxyl group in $C_4H_6O_6$, respectively. Therefore, we may conclude that the chemical treatment process increases adsorption capacity of paper mill sludge for cation heavy metals such as Cd but not for As.

• Journal of Animal Environmental Science
• /
• v.12 no.1
• /
• pp.29-34
• /
• 2006

The effects of turning frequency were examined on the efficiency of composting lime treated excess sludge amended with sawdust from the activated sludge process after a liquid/solids separation process. The raw and excess sludge from the activated sludge process associated with the hog wastewater treatment system is a significant problem and composting is an effective method far reducing the pollution potential of hog wastewater sludge. The coagulant used sludge composting and ammonia emissions from composting are not well established. The effect of compost properties such as high total carbon, C/N ratio and pH value on performance of composting sludge and biofiltration of ammonia from composting process were investigated. The ammonia emission was not significantly increased during composting. The ammonia concentrations of the exhaust air of composter were ranged from 0.5 and 7 ppm about 12 days after composting. The performance of the hog wastewater sludge composting was the most sensitive to chemical treated sludge properties such as high total carbon and high C/N ratio of the initial compost mixes. Temperature in compost and ammonia emission were not greatly affected by the turning frequency.

• Journal of Electrochemical Science and Technology
• /
• v.13 no.2
• /
• pp.186-198
• /
• 2022

Heavy metals recovery from Printed Circuit Boards industrial wastewater is crucial because of its cost effectiveness and environmental friendliness. In this study, a copper recovery route combining the sequential processes of acid leaching and LIX 984N extracting with an electrowinning technique from Printed Circuit Boards production's sludge was performed. The used residual sludge was originated from Hanoi Urban Environment One Member Limited Company (URENCO). The extracted solution from the printed circuit boards waste sludge containing a high copper concentration of 19.2 g/L and a small amount of iron (0.575 ppm) was used as electrolyte for the subsequent electrolysis process. By using a simulation model for multi-step current electrolysis, the reasonable current densities for an electrolysis time interval of 30 minutes were determined, to optimize the specific consumption energy for the copper recovery. The mathematical simulation model was built to calculate the important parameters of this process.

• Computers and Concrete
• /
• v.8 no.6
• /
• pp.617-629
• /
• 2011

In this investigation, reservoir sediment and municipal sewage sludge were sintered to form the artificial lightweight aggregates. The sintered aggregates were compared with the commercialized lightweight aggregates to in terms of potential alkali-silica reactivity and chemical stability based on analyses of their physical and chemical properties, leaching of heavy metal, alkali-silica reactivity, crystal phase species and microstructure. Experimental results demonstrated that the degree of sintering of an aggregate affected the chemical resistance more strongly than did its chemical composition. According to ASTM C289-94, all potential alkali-silica reactivity of artificial lightweight aggregates were in the harmless zone, while the potential reactivity of artificial lightweight aggregates made from reservoir sediment and municipal sewage sludge were much lower than those of traditional lightweight aggregates.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.35 no.1
• /
• pp.27-32
• /
• 2003

To understand the chemical structure of sewer sludge in comparison with commercial compost and charcoal used as a soil improver, it was carried out to analyse their ash contents and metal ions, and to elucidate the chemical structure of their residuals after a sequential treatment of alcohol-benzene(1:2) extraction in Soxhlet, 3% HCl reflux and 79% H₂SO₄ hydrolysis, using CHNS analyzer and solid C-13 NMR spectrometer. The results obtained were as follows: 1. Ash content of sludge was about 46% that is higher than those of compost (17%) and charcoal (4%). 2. The residual of sludge after a sequential treatment of HCl and H₂SO₄ hydrolyses had high ash content about 23%, too. 3. The sludge seems to be suitable to the soil improver because the content of heavy metal ions in sludge was near the compost and below the organic fertilizer standard. 4. Elemental composition of sludge residual after HCl-H₂SO₄ hydrolyes was C/sub 56/H/sub 91/O/sub 12/N₂S = (C/sub 6/H/sub 10/O/sub 5/)/sub 7/(C/sub 6/H₄)/sub 7/C₂H/sub 43/O₂N₂S, similar to C/sub 103/H/sub 122/O/sub 33/N/sub 6/S = (C/sub 6/H/sub 10/O/sub 5/)/sub 6/(C/sub 6/H₄)/sub 10/C/sub 7/H/sub 22/O₃N/sub 6/S of compost. 5. The sludge residual had proved to have both considerable aliphatic and aromatic groups, but the compost residual to have mainly aliphatic groups and the charcoal to have mainly aromatic groups, through the peak analysis of solid C-13 NMR charts. 6. So, the sewer sludge is proved to have a considerable amount of aromaticity like in woody biomass containing lignin.