• Environmental Engineering Research
• /
• 제23권2호
• /
• pp.195-204
• /
• 2018

A pilot scale study was conducted on a down-flow hanging sponge (DHS) reactor installed at a sewage treatment plant in Banda Aceh, Indonesia for treatment of desludging septic tank wastewater. Raw wastewater with an average biochemical oxygen demand (BOD) and total suspended solids of 139 mg/L and 191 mg/L, respectively, was pumped into the reactor. Two different hydraulic retention times (HRTs, 3 h and 4 h) were investigated, equivalent to organic loadings of 1.11 and $0.78kg\;BOD/m^3/d$, respectively. The average BOD concentration in the final effluent was 46 and 26 mg/L at HRTs of 3 and 4 h, respectively. The concentration of retained sludge along the reactor height was 10.2-18.7 g VSS/L-sponge, and the sludge activities were 0.24-0.32 and 0.04-0.40 mg/g VSS/h for heterotrophs and nitrification, respectively. Values of water hold-up volume, dispersion coefficient, and number of tank in-series found from tracer studies of clean sponge and biomass-loaded sponge confirmed that growth of retained sludge on the sponge module improved hydraulic performance of the reactor. Adoption of the DHS reactor by this Indonesian sewage treatment plant would enhance the role of the current desludging septic tank wastewater treatment system.

• 한국응용과학기술학회지
• /
• 제25권3호
• /
• pp.363-369
• /
• 2008

In the present work, the choice of the nano carbon black and optimum mixed ratio and effectiveness of the mixed carbon black to get a raw data for a manufacturing method of conductive complex board. Optimum mixed ratio of paper sludge & water was 1 : 2.5 for reformations. HB-41-Y was cheaper than Super-P with the single carbon black. Also electric conductivity of HB-41-Y($6.406{\times}10^{-2}\;{\Omega}cm^{-1}$) was about 6.5 times higher than Super-P($9.741{\times}10^{-3}\;{\Omega}cm^{-1}$) at 20 wt% carbon black. This time optimum mixture ratio of the paper sludge and the carbon black to be about 15 wt%, optimum mixed ratio HB-41Y and Graphite about 3:1 and its electric conductivity was $5.824{\times}10^{-2}\;{\Omega}cm^{-1}$.

• 한국응용과학기술학회지
• /
• 제27권4호
• /
• pp.437-444
• /
• 2010

Dry Process(natural drying, hot-air drying, oil fry drying), optimized mixture ratio and the condition of carbonization was carried out in order to improve the product durability develop eco-friendly solid fuel mixing food waste and paper sludge. As a result of the experiment, oil fry drying process was the fastest method for drying food waste and paper sludge mixture that contains 80% water inside, and the optimized mixture ratio to minimize the generating concentration of chlorine gas against caloric value of mixture ratio was 7:3. Additionally proper temperature of product carbonization was about $200^{\circ}C$ and shown increasing product durability through the carbonization. Therefore, the pelletized solid fuel be shaped diameter around 0.5cm, length 2cm under which was pulverized and molded using 7:3 mixture of food waste, and paper sludge was the eco-friendly solid fuel possible to be industrialized which is consist of chlorine concentration of below 2.0wt% and the lowest caloric value of over 5,000kcal/kg. In conclusion, this developing manufacturing process of the solid fuel can be interpreted to contribute alternative energy development in accordance with low carbon and green growth era.

• Korean Chemical Engineering Research
• /
• 제49권6호
• /
• pp.851-856
• /
• 2011

본 연구에서는 하수슬러지의 열분해로 촤를 제조하였고, 열분해 반응 조건이 슬러지 촤의 특성에 미치는 영향을 조사하였다. 열분해 온도가 $300^{\circ}C$에서 $800^{\circ}C$로 증가함에 따라 슬러지 char의 비표면적은 증가하였으나, $700^{\circ}C$에서는 일시적으로 감소하였다. 열분해 속도는 char의 비표면적과 기공부피에 미치는 영향이 크지 않은 것으로 나타났다. 반면, 열분해 반응시간이 증가함에 따라 비표면적과 기공부피는 증가하였으나, 평균 기공크기는 감소하는 결과를 나타내었다.

• 대한환경공학회지
• /
• 제31권9호
• /
• pp.743-748
• /
• 2009

화학적인 슬러지 개량은 하수슬러지의 탈수성을 개선하기 위해 주로 사용된다. 이 공정은 개량제를 이용하여 처리한 후 농축 및 탈수된다. 본 연구는 DAF 부상장치를 이용하여 하수슬러지의 개량(혐기성 보관시간, 응집제 종류, 및 주입량) 및 부상조건(슬러지 농도 및 A/S 비)에 따른 부상농축효율을 평가한 것이다. 혐기성 보관시간에 따라 하수슬러지의 비표면적과 여과비저항은 증가하였다. $Al_2(SO_4)_3$, $Fe_2(SO_4)_3$ 및 PSO-M을 주입하여 개량된 하수슬러지는 보관시간이 경과에 따라 부상농축효율이 거의 감소되지 않았다. 개량된 하수슬러지는 A/S 비가 0.01 mL/mg 이상이면, 부상농축효율이 저하되지 않고 96% 이상 유지할 수 있었다.

• 한국식품과학회지
• /
• 제9권4호
• /
• pp.291-294
• /
• 1977

맥주공장의 폐수 오니(汚泥)를 가축의 사료로 이용하기 위하여 그 화학성분을 분석한 결과 다음과 같은 결과를 얻었다. 1. 3일간 천일건조한 sludge의 일반성분을 분석한 결과 수분 15.4%, 조단백 46.47%, 조지방 1.57%, 조섬유 4.02%, 조회분 13.12%, 가용성 무질소물 19.41%이었다. 2. Amino acid 의 분석 결과 확인된 17종의 총 아미노산 함량은 건물의 38.05%이었고 병아리 육추의 경우에 필요한 필수 아미노산은 전량이 충분하였으며 특히 그중 Isoleucine, Leucine, Phenylalanine, Tryosine Glycine 그리고 Serine은 필요량의 2-3배에 달했다. 3. 무기물은 병아리 육추의 표준사료와 비교 했을때 Mg와 Cu는 충분하였으나 그 밖의 성분은 상당량 부족하였다.

• 전기학회논문지
• /
• 제67권11호
• /
• pp.1477-1485
• /
• 2018

There are two major issues for activated sludge process in sewage treatment plant. One is how to make sewage be more clean and the other is the energy saving in sewage treatment process. The major monitoring sewage qualities are chemical oxygen demand, phosphorus, nitrogen, suspended solid in effluent. These are transmitted to the national TMS(Telemetry Monitoring System) at every hour. If these exceed the environmental standard, the environmental charges imposed. So, these water qualities are to be controlled below the environmental standard in operation of sewage treatment plant. And recently, the energy saving is also important in process operation. Over 50% energy is consumed in blowers and motors for injection oxygen into aeration tank. So, with the water qualities to be controlled below the environmental standard, the energy saving also is to be accomplished for efficient plant management. Almost researches are aimed to control water quality without considering energy saving. AI techniques have been used for control water quality. AI modeling simulator provided the optimal control inputs(blower speed, waste sludge, return sludge) for control water quality. Blower speed is the main control input for activated sludge process. To make sewage be more clean, the excessive blower speed is supplied, but water quality is not better than the previous. In results, non necessary energy is consumed. In this paper we propose a new method that the energy saving also is to be accomplished with the water qualities to be controlled below the environmental standard for efficient plant management. Water qualities in only aeration tank are used the inputs of fuzzy models. Outputs of these models are chemical oxygen demand, phosphorus, nitrogen, suspended solid in effluent and have the environmental standards. In test, we found this method could save 10% energy than the previous methods.

• 한국물환경학회지
• /
• 제20권4호
• /
• pp.327-332
• /
• 2004

This study was carried out to examine the effect of gamma irradiation on the physico-chemical characteristics and ultimate anaerobic biodegradability of sewage sludge. The results found that the solubilization rates of SCOD in wasted activated sludge(WAS) and thickened sludge(T-S) with gamma irradiation of 3kGy were 8 times and 7 times greater than these of the raw WAS and T-S without the irradiation, respectively; each soluble concentration protein were 4 times and 3 times greater than these of the raw WAS and T-S; each soluble carbohydrate concentration was 8 times and 6 times greater than these of the raw WAS and T-S. The ultimate anaerobic biodegradabilities of WAS and T-S with gamma irradiation were 51 % and 50%, which corresponds to each 8% and 10% greater than these of the raw sludges. Approximately 83% and 81% of the each biodegradable substrates in the irradiated WAS and the T-S were degraded within 11 days with the first order decay rate coefficients, $k_1$ that ranged $0.143{\sim}0.164day^{-1}$ for WAS and $0.134{\sim}0.152day^{-1}$ for T-S. Based on the results, it can be concluded that when irradiated with gamma the solubilization of sewage sludge greatly increases resulting in substrates suitable for the subsequent biological treatment processes.

• Korean Chemical Engineering Research
• /
• 제51권3호
• /
• pp.352-357
• /
• 2013

본 연구에서는 정수장 슬러지를 사용하여 제조한 정수슬러지 가공 분말의 압출공정을 통해서 입상흡착제를 제조하였다. 바인더 첨가와 소성과정이 입상형 흡착제의 물리 화학적 특성에 미치는 영향을 질소흡착, 압축강도, 주사전자현미경, 엑스선회절, 피리딘흡착 적외선분광법 등으로 분석하였다. 바인더의 함량을 5 wt%까지 증가시키면 압축강도가 3배 이상으로 개선되었으나 트리메틸아민을 흡착할 수 있는 표면적이 30% 정도 감소하여 입상흡착제의 트리메틸아민 파과시간이 단축되었다. 성형된 입상흡착제의 소성과정을 통해서 표면에 브뢴스테드산점과 루이스산점으로 구성된 산점이 발현되어, 염기성 기체인 트리메틸아민의 파과 시간이 3배 이상으로 증가하였다.

• 한국산학기술학회논문지
• /
• 제18권2호
• /
• pp.294-301
• /
• 2017

본 연구에서는 유중건조 공정으로 가축분뇨 슬러지 고형 연료를 제조하기 위한 최적 조건을 선정하는 연구를 수행하였다. 연구결과물(슬러지 고형 연료)의 특성 평가를 위하여 유증 증발량 측정 실험, 슬러지 유중건조 실험, 그리고 건조 슬러지 성형 실험을 수행하였으며, 칼로리미터와 PXRF 장비를 이용하여 고형 연료의 성능을 측정하였다. 또한, 현재 시중에서 일반적으로 사용되고 있는 목재 고형 연료와 본 연구에서 개발한 슬러지 고형 연료 사이의 열량 비교 연구를 수행하였다. 실험결과에 따르면 대량생산 및 환경 친화적 측면을 함께 고려하였을 때, 30g의 슬러지를 $130^{\circ}C$의 식물성 기름으로 25분간 처리하는 것이 고형연료 생산에 가장 적합한 조건으로 나타났다. 본 연구에서 제조한 슬러지 고형 연료의 열량은 5211kcal/kg이었으며, 이는 시중에서 널리 사용되고 있는 목재 고형 연료의 열량보다 큰 값이다. 마지막으로, PXRF 측정 결과 황을 제외한 중금속은 검출되지 않았다. 그러므로 추후 산업용 제조기술로의 개발 시 황 성분 제어 공정에 대한 추가적인 연구가 필요할 것으로 보인다.