• 제목/요약/키워드: Chemical Recycling

검색결과 970건 처리시간 0.026초

폴리에스터 폐자원의 화학적 재활용기술 (Chemical Recycling Technology from Polyester Wastes)

  • 한명완;강경석;송재경
    • Elastomers and Composites
    • /
    • 제47권2호
    • /
    • pp.96-103
    • /
    • 2012
  • 본 논문에서는 PET를 재활용하는 최근의 기술들을 소개한다. PET가 광범위하게 사용되고 또한 썩지 않기 때문에 환경 문제를 야기하고 또한 이 물질의 폐기 및 소각은 경제적 손실이기도 하다. PET의 화학적 재활용은 이 폐기물들을 유용한 원료물질로 전환하여 PET를 재생산하는 것이 가능하게 한다. PET의 화학적 재활용은 글리콜에 의한 글리콜리시스, 메탄올에 의한 메탄올리시스, 물에 의한 가수분해 등의 반응에 의한 PET 고분자 사슬의 분해가 이루어지고, 분리정제 과정을 거쳐 MEG, DMT, PTA와 같은 단량체 혹은 폴리에스터 올리고머로 만들어진다. 이 물질들은 폴리에스터를 합성하는 데 사용될 수 있다.

자동차 시트용 폐폴리우레탄의 해중합 (Depolymerization of Waste Polyurethane from Automotive Seats)

  • 민성진;공승대;윤철훈;강안수;엄재열;신판우;이석우
    • 한국응용과학기술학회지
    • /
    • 제18권2호
    • /
    • pp.103-110
    • /
    • 2001
  • Resource recovery and recycling of materials and products, including polyurethanes is viewed as a necessity in today's society. Most urethane polymers are made from a polyol and a diisocyanate. these and be chemicals such as water, diamines or diols that react with isocyanate groups and add to the polymer backbone. The problems of recycling polyurethane wastes has major technological, economic and ecological significance because polyurethane itself is relatively expensive and its disposal whether by burning is also costly. In general, the recycling methods for polyurethane could be classified as mechanical, chemical and feedstock. In the chemical recycling method, there are hydrolysis, glycolysis, pyrolysis and aminolysis. This study, the work was carried out glycolysis using sonication ant catalyzed reaction. Different kinds of recycled polyols were produced by current method(glycolysis), catalyzed reaction and sonication as decomposers and the chemical properties were analyzed. The reaction results in the formation of polyester urethane diols, the OH value which is determined by the quantity of diol used for the glycolysis conditions. The glycolysis rates by sonication for the various glycols, increased as fallows: PPG

LED 폐자원의 재활용 현황 (Current Status of Recycling of LED Waste)

  • 이덕희;신동윤;김태형;이찬기;박경수;이기웅;이재령
    • 자원리싸이클링
    • /
    • 제28권2호
    • /
    • pp.14-22
    • /
    • 2019
  • LED 산업은 기술의 발전과 함께 경제적으로 에너지 절감효과가 큰 동시에 환경친화적인 장점으로 보급이 확산되면서 시장은 급격히 확대되고 있다. 더욱이, 다양한 융합기술과 대규모 신시장의 출현 및 신규시장 확대 등으로 인해 향후 대량의 폐자원이 발생할 것으로 예견되면서 재활용 기술 개발이 요구되는 실정이다. 또한, 현재 발생하고 있는 LED 폐자원의 발생량 및 관리 체계의 부재로 인해 매립 및 소각으로 처리되는 것으로 보고되고 있다. 본 논문에서는 현시점에서의 LED 폐자원 재활용 현황을 살펴보고 재활용 기술 및 방안에 대해 소개하고자 한다.

폐산의 재활용 현황 및 관리 방안 (Present Condition on the Recycling and Management for Waste Acids)

  • 심연주;김의용
    • Korean Chemical Engineering Research
    • /
    • 제48권3호
    • /
    • pp.300-303
    • /
    • 2010
  • 세계 각국은 폐기물의 발생 및 처리 문제를 극복하기 위해 많은 노력을 기울이고 있다. 특히, 매년 발생량이 증가하고 있는 폐산은 처리보다는 재활용에 대한 관심이 크게 증가하고 있는 상황이지만, 국내외적으로 재활용 생성물의 품질규정이 불명확하고 관리체계 또한 미비한 실정이다. 따라서 폐산 생성물의 효율적 관리방안을 마련하기 위해 본 연구에서는 국내의 폐산 발생 및 재활용 관련 현황을 조사하였으며, 이를 통해 현재 국내에서 재활용되고 있는 폐산의 주요 생성물을 조사하였다. 그 결과 염화철, 황산철, 청화제1동, 산화동, 치환동이 주요 재활용 생성물인 것으로 나타났다. 장차 이들 생성물에 대한 체계적인 관리체제를 구축함으로서 폐산 자원화를 제고할 뿐 아니라 환경오염 방지와 같은 긍정적인 결과를 기대할 수 있을 것이다.

플렉소 인쇄 신문지와 OCC 배합에 따른 ONP 탈묵펄프의 백색도 변화 (Analysis of brightness decrease originated from mixing of flexo printed ONP and OCC in ONP recycling process)

  • 류정용;송봉근
    • 한국펄프종이공학회:학술대회논문집
    • /
    • 한국펄프종이공학회 2011년도 추계학술발표회 논문집
    • /
    • pp.119-123
    • /
    • 2011
  • The application of flexo printed ONP and OCC leads to brightness decrease of deinked stock in ONP recycling system. The largest problems are due to accumulation of flexo ink & introduction of brown fibers. All these are emphasized by variations in the amount of flexo printed ONP and OCC in recovered ONP stock. Most of the brightness problems caused by flexo ink can be helped and solved by applying a proper polyelectrolytes as coagulation agent and flocculation agent. This requires exact evaluation of sedimentation or dissolved air flotation potentials of flexo ink and polyelectrolytes. Effect of bleaching chemical (H2O2) addition level on the increase of brightness of OCC included stock has been investigated by lab scale test.

  • PDF

Investigation of Low-Cost, Simple Recycling Process of Waste Thermoelectric Modules Using Chemical Reduction

  • Kim, Woo-Byoung
    • Bulletin of the Korean Chemical Society
    • /
    • 제34권7호
    • /
    • pp.2167-2170
    • /
    • 2013
  • A low-cost and simple recycling process of waste thermoelectric modules has been investigated using chemical reduction methods. The recycling is separated by two processes, such as dissolving and reduction. When the waste thermoelectric chips are immersed into a high concentration of $HNO_3$ aqueous solution at $100^{\circ}C$, oxide powders, e.g., $TeO_2$ and $Sb_2O_3$, are precipitated in the $Bi^{3+}$ and $HTeO{_2}^+$ ions contained solution. By employing a reduction process with the ions contained solutions, $Bi_2Te_3$ nanoparticles are successfully synthesized. Due to high reduction potential of $HTeO{_2}^+$ to Te, Te elements are initially formed and subsequently $Bi_2Te_3$ nanoparticles are formed. The average particle size of $Bi_2Te_3$ was calculated to be 25 nm with homogeneous size distribution. On the other hand, when the precipitated powders reduced by hydrazine, $Sb_2O_3$ and Te nanoparticles are synthesized because of higher reduction potentials of $TeO_2$ to Te. After the washing step, the $Sb_2O_3$ are clearly removed, results in Te nanoparticles.

연질 폐우레탄 폼의 재활용을 위한 해중합법 개발 (Development of Depolymerization Method on the Recycling of Waste Flexible Polyurethane Foam)

  • 엄재열;이병학;신판우;김용렬
    • 한국환경보건학회지
    • /
    • 제28권2호
    • /
    • pp.41-49
    • /
    • 2002
  • Resource recovery and recycling of materials and products including polyurethanes are viewed as a necessity in today's society. The problems of recycling polyurethane wastes has major technological, economic and ecological significance because polyurethane itself is relatively expensive and its disposal by burning is also costly. In general, the recycling methods for polyurethane could be classified as mechanical, chemical and physical. In the chemical recycling method, there ate hydrolysis, glycolysis, pyrolysis and aminolysis. This study was carried out glycolysis using new method such as sonication and catalyzed reaction. There are kinds of recycled polyols were produced by current method(glycolysis) but, this study were with catalyzed reaction and sonication as decomposers and the chemical properties were analyzed. The reaction results in the formation of polyester urethane diols and then the OH value which is determined by the quantity of diol used for the glycolysis conditions. The glycolysis rates by sonication and catalyzed reaction for the various glycols, increased as: PPG