• Korean Chemical Engineering Research
• /
• 제46권1호
• /
• pp.156-163
• /
• 2008

화학공장에서는 공정 이상, 장치 수명 및 경제적 환경 등에 의하여 변경이 발생하고 있다. 그리고 변경관리는 정확한 기술적 판단근거에 의한 변경 판정, 위험도 확인 및 위험성 평가 수행 등 근본적인 공정안전 기술을 바탕으로 이루어진다. 그러나 변경관리는 경험 부족, 지식 부족 및 기술인력 부족 등의 이유로 수행하기 매우 어려운 상황에 놓여있다. 본 연구에서는 화학공장 변경관리의 취약점을 파악하고 이를 적절히 보완하여 안전성을 향상할 수 있는 변경관리 체계를 구축하였다. 위험성 평가를 기반으로 하는 변경관리 절차의 정립 및 변경 여부 판단, 변경시 위험도 산정 등 변경관리 의사결정 단계들의 명확한 판단 기준 체계 정립을 통한 장치산업의 변경관리 수행 체계를 제안하였다. 이러한 안전공학 기술이 접목된 형태의 변경관리 절차를 제안하여 화학공장의 안전성 향상을 꾀하고자 하였다.

• Bulletin of the Korean Chemical Society
• /
• 제27권3호
• /
• pp.361-362
• /
• 2006

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.474-478
• /
• 1986

The phenomenon of a continuous Steel-making process was studied with a set of collected equilibrium data for the steel-oxidation reactions. Mass and Heat balances were also established. Mass transfer constants which are physically unmeasurable but escential for the simulation study in the steel-making process were calculated from the experimental data using an optimization technique. Based on these data various operating conditions and process characteristics were examined.

• Current Photovoltaic Research
• /
• 제6권2호
• /
• pp.49-55
• /
• 2018

Recently solar cell industry needs the optimal design of Czochralski process for low cost high quality silicon mono crystalline ingot. Because market needs both high efficient solar cell and similar cost with multi-crystalline Si ingot. For cost reduction in Czochralski process, first of all energy reduction should be completed because Czochralski process is high energy consumption process. For this purpose we studied optimal water-cooling tube design and simultaneously we also check the quality of ingot with Von mises stress and V(pull speed of ingot)/G(temperature gradient to the crystallization) values. At this research we used $CG-Sim^{(R)}$ S/W package and finally we got improved water-cooling tube design than normally used process in present industry. The optimal water-cooling tube length should be 200mm. The result will be adopted at real industry.

• 한국안전학회지
• /
• 제24권4호
• /
• pp.40-46
• /
• 2009

The early identification of thermal hazards associated with a process such as the heats of reaction, exothermic decompositions, and the understanding of thermodynamics before any large scale operations are undertaken. The evaluation of reaction factors and thermal behavior on esterification process in manufacture of concrete mixture agents are described in the present paper. The experiments were performed in the differential scanning calorimetry(DSC), C 80 calorimeter, and thermal screening unit($TS^u$). The aim of the study was to evaluate the thermal stability of single material and mixture in esterification process. We provided the thermal data of chemical materials to present safe operating conditions through this study.

• Korea-Australia Rheology Journal
• /
• 제21권2호
• /
• pp.83-89
• /
• 2009

Coating process plays an important role in information technology such as display, battery, chip manufacturing and so on. However, due to complexity of coating material and fast deformation of the coating flow, the process is hard to control and it is difficult to maintain the desired quality of the products. Moreover, it is hard to measure the coating process because of severe processing conditions such as high drying temperature, high deformation coating flow, and sensitivity to the processing variables etc. In this article, the coating process is to be re-illuminated from the rheological perspectives. The practical approach to analyze and quantify the coating process is discussed with respect to coating materials, coating flow and drying process. The ideas on the rheology control of coating materials, pressure and wet thickness control in patch coating process, and stress measurement during drying process will be discussed.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XIII)
• /
• pp.654-654
• /
• 2003

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2005년도 생물공학의 동향(XVI)
• /
• pp.430-430
• /
• 2005

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2005년도 생물공학의 동향(XVII)
• /
• pp.584-584
• /
• 2005

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2005년도 생물공학의 동향(XVII)
• /
• pp.585-585
• /
• 2005